| # | Standards |
| 1 | ISO 5006:2017 Earth-moving machinery – Operator’s field of view – Test method and performance criteria |
| 2 | ISO 5010:2007 Earth-moving machinery – Rubber-tyred machines – Steering requirements |
| 3 | ISO 5011:2014 Inlet air cleaning equipment for internal combustion engines and compressors – Performance testing |
| 4 | ISO 5053 Industrial trucks – Terminology and classification |
| 5 | ISO 5053-1:2015 Part 1: Types of industrial trucks |
| 6 | ISO/IEC 5055:2021 Information technology — Software measurement — Software quality measurement — Automated source code quality measures |
| 7 | ISO 5122:1979 Documentation – Abstract sheets in serial publications |
| 8 | ISO 5123:1984 Documentation – Headers for microfiche of monographs and serials |
| 9 | ISO 5127:2017 Information and documentation – Foundation and vocabulary |
| 10 | ISO 5128:1980 Acoustics – Measurement of noise inside motor vehicles |
| 11 | ISO 5129:2001 Acoustics – Measurement of sound pressure levels in the interior of aircraft during flight |
| 12 | ISO 5130:2007 Acoustics – Measurements of sound pressure level emitted by stationary road vehicles |
| 13 | ISO 5131:2015 Tractors for agriculture and forestry – Measurement of noise at the operator’s position – Survey method |
| 14 | ISO 5135:1997 Acoustics – Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
| 15 | ISO 5136:2003 Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method |
| 16 | ISO 5138 Office machines – Vocabulary |
| 17 | ISO 5138-1:1978 Part 1: Dictation equipment |
| 18 | ISO 5138-2:1980 Part 2: Duplicators |
| 19 | ISO 5138-3:1981 Part 3: Addressing machines |
| 20 | ISO 5138-4:1981 Part 4: Letter opening machines |
| 21 | ISO 5138-5:1981 Part 5: Letter folding machines |
| 22 | ISO 5138-7:1986 Part 7: Postal franking machines |
| 23 | ISO 5138-9:1984 Part 9: Typewriters |
| 24 | ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full |
| 25 | ISO 5167-1:2003 Part 1: General principles and requirements |
| 26 | ISO 5167-2:2003 Part 2: Orifice plates |
| 27 | ISO 5167-3:2003 Part 3: Nozzles and Venturi nozzles |
| 28 | ISO 5167-4:2003 Part 4: Venturi tubes |
| 29 | ISO 5167-5:2016 Part 5: Cone meters |
| 30 | ISO 5167-6:2019 Part 6: Wedge meters |
| 31 | ISO 5168:2005 Measurement of fluid flow – Procedures for the evaluation of uncertainties |
| 32 | ISO 5211:2017 Industrial valves – Part-turn actuator attachments |
| 33 | ISO/IEC 5218:2004 Information technology — Codes for the representation of human sexes |
| 34 | ISO/IEC 5230:2020 Information technology — OpenChain Specification |
| 35 | ISO 5232:1998 Graphical symbols for textile machinery |
| 36 | ISO 5234:2005 Textile machinery and accessories – Metallic card clothing – Definitions of dimensions, types and mounting |
| 37 | ISO 5237:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 5 degrees 57′ [Withdrawn: replaced with ISO 8489-5] |
| 38 | ISO 5238 Textile machinery and accessories – Packages of yarns and intermediate products |
| 39 | ISO 5238-1:1982 Part 1: Terminology |
| 40 | ISO 5239:1980 Textile machinery and accessories – Winding – Basic terms |
| 41 | ISO 5247 Textile machinery and accessories – Weaving machines |
| 42 | ISO 5247-1:2004 Part 1: Vocabulary and classification |
| 43 | ISO 5247-3:1993 Part 3: Parts of the machine – Vocabulary |
| 44 | ISO 5248:2003 Textile machinery and accessories – Dyeing and finishing machinery – Vocabulary for ancillary devices |
| 45 | ISO 5250:2003 Textile machinery and accessories – Dyeing and finishing machinery – Terms for tentering and heat-treatment machinery |
| 46 | ISO 5261:1995 Technical drawings – Simplified representation of bars and profile sections |
| 47 | ISO 5284:1986 Conveyor belts – List of equivalent terms |
| 48 | ISO 5288:2001 Synchronous belt drives – Vocabulary |
| 49 | ISO 5323:1984 Solid wood parquet and raw parquet blocks – Vocabulary |
| 50 | ISO 5329:1978 Solid wood paving blocks – Vocabulary |
| 51 | ISO 5344:2004 Electrodynamic vibration generating systems – Performance characteristics |
| 52 | ISO 5347 Methods for the calibration of vibration and shock pick-ups |
| 53 | ISO 5347-8:1993 Part 8: Primary calibration by dual centrifuge |
| 54 | ISO 5347-12:1993 Part 12: Testing of transverse shock sensitivity |
| 55 | ISO 5347-13:1993 Part 13: Testing of base strain sensitivity |
| 56 | ISO 5347-15:1993 Part 15: Testing of acoustic sensitivity |
| 57 | ISO 5347-16:1993 Part 16: Testing of mounting torque sensitivity |
| 58 | ISO 5347-17:1993 Part 17: Testing of fixed temperature sensitivity |
| 59 | ISO 5347-18:1993 Part 18: Testing of transient temperature sensitivity |
| 60 | ISO 5347-22:1997 Part 22: Accelerometer resonance testing – General methods |
| 61 | ISO 5348:1998 Mechanical vibration and shock – Mechanical mounting of accelerometers |
| 62 | ISO 5356 Anaesthetic and respiratory equipment – Conical connectors |
| 63 | ISO 5356-1:2015 Part 1: Cones and sockets |
| 64 | ISO 5356-2:2012 Part 2: Screw-threaded weight-bearing connectors |
| 65 | ISO 5358:1992 Anaesthetic machines for use with humans |
| 66 | ISO 5359:2014 Anaesthetic and respiratory equipment – Low-pressure hose assemblies for use with medical gases |
| 67 | ISO 5360:2016 Anaesthetic vaporizers – Agent-specific filling systems |
| 68 | ISO 5361:2016 Anaesthetic and respiratory equipment – Tracheal tubes and connectors |
| 69 | ISO 5362:2006 Anaesthetic reservoir bags |
| 70 | ISO 5364:2016 Anaesthetic and respiratory equipment – Oropharyngeal airways |
| 71 | ISO 5366:2016 Anaesthetic and respiratory equipment – Tracheostomy tubes and connectors |
| 72 | ISO 5367:2014 Anaesthetic and respiratory equipment – Breathing sets and connectors |
| 73 | ISO 5391:2003 Pneumatic tools and machines – Vocabulary |
| 74 | ISO 5396:1977 Hardmetal heading dies – Terminology |
| 75 | ISO 5408:2009 Screw threads – Vocabulary |
| 76 | ISO 5419:1982 Twist drills – Terms, definitions and types |
| 77 | ISO 5420:1983 Reamers – Terms, definitions and types |
| 78 | ISO 5426:1983 Information and documentation – Extension of the Latin alphabet coded character set for bibliographic information interchange[Note 3] |
| 79 | ISO 5426-2:1996 Part 2: Latin characters used in minor European languages and obsolete typography |
| 80 | ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange |
| 81 | ISO 5428:1984 Greek alphabet coded character set for bibliographic information interchange |
| 82 | ISO 5436 Geometrical Product Specifications (GPS) – Surface texture: Profile method; Measurement standards |
| 83 | ISO 5436-1:2000 Part 1: Material measures |
| 84 | ISO 5436-2:2012 Part 2: Software measurement standards |
| 85 | ISO 5445:1980 Ferrosilicon – Specification and conditions of delivery |
| 86 | ISO 5446:2017 Ferromanganese – Specification and conditions of delivery |
| 87 | ISO 5447:1980 Ferrosilicomanganese – Specification and conditions of delivery |
| 88 | ISO 5448:1981 Ferrochromium – Specification and conditions of delivery |
| 89 | ISO 5449:1980 Ferrosilicochromium – Specification and conditions of delivery |
| 90 | ISO 5450:1980 Ferrotungsten – Specification and conditions of delivery |
| 91 | ISO 5451:1980 Ferrovanadium – Specification and conditions of delivery |
| 92 | ISO 5452:1980 Ferromolybdenum – Specification and conditions of delivery |
| 93 | ISO 5453:1980 Ferroniobium – Specification and conditions of delivery |
| 94 | ISO 5454:1980 Ferrotitanium – Specification and conditions of delivery |
| 95 | ISO 5455:1979 Technical drawings – Scales |
| 96 | ISO 5456 Technical drawings – Projection methods |
| 97 | ISO 5456-1:1996 Part 1: Synopsis |
| 98 | ISO 5456-2:1996 Part 2: Orthographic representations |
| 99 | ISO 5456-3:1996 Part 3: Axonometric representations |
| 100 | ISO 5456-4:1996 Part 4: Central projection |
| 101 | ISO 5457:1999 Technical product documentation – Sizes and layout of drawing sheets |
| 102 | ISO 5458:1998 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing |
| 103 | ISO 5459:2011 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems |
| 104 | ISO 5479:1997 Statistical interpretation of data – Tests for departure from the normal distribution |
| 105 | ISO 5492:2008 Sensory analysis – Vocabulary |
| 106 | ISO 5496:2006 Sensory analysis – Methodology – Initiation and training of assessors in the detection and recognition of odours |
| 107 | ISO 5507:2002 Oilseeds, vegetable oils and fats – Nomenclature |
| 108 | ISO 5526:2013 Cereals, pulses and other food grains – Nomenclature |
| 109 | ISO 5527:2015 Cereals – Vocabulary |
| 110 | ISO 5572:1987 Shipbuilding and marine structures – Numbering of equipment and structural elements in ships |
| 111 | ISO 5576:1997 Non-destructive testing – Industrial X-ray and gamma-ray radiology – Vocabulary |
| 112 | ISO 5577:2017 Non-destructive testing – Ultrasonic testing – Vocabulary |
| 113 | ISO 5593:1997 Rolling bearings – Vocabulary |
| 114 | ISO 5598:2008 Fluid power systems and components – Vocabulary |
| 115 | ISO 5652:1984 Information processing – 9-Track, 12,7 mm (0.5 in) wide magnetic tape for information interchange – Format and recording, using group coding at 246 cpmm (6 250 cpi) |
| 116 | ISO 5653:1980 Information processing – Interchangeable magnetic twelve-disk pack (200 Mbytes) |
| 117 | ISO 5654 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on one side |
| 118 | ISO 5654-1:1984 Part 1: Dimensional, physical and magnetic characteristics |
| 119 | ISO 5654-2:1985 Part 2: Track format |
| 120 | ISO 5659 Plastics – Smoke generation |
| 121 | ISO 5659-1:1996 Part 1: Guidance on optical-density testing [Withdrawn: replaced by ISO 5659-2:2012] |
| 122 | ISO 5659-2:2017 Part 2: Determination of optical density by a single-chamber test |
| 123 | ISO/TR 5659-3:1999 Part 3: Determination of optical density by a dynamic-flow method [Withdrawn, no replacement] |
| 124 | ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate |
| 125 | ISO 5660-1 Heat release rate (cone calorimeter method) |
| 126 | ISO 5660-2 Smoke production rate (dynamic measurement) |
| 127 | ISO/TS 5660-3 Guidance on measurement |
| 128 | ISO 5681:1992 Equipment for crop protection – Vocabulary |
| 129 | ISO 5702:1983 Equipment for harvesting – Combine harvester component parts – Equivalent terms |
| 130 | ISO 5725 Accuracy (trueness and precision) of measurement methods and results |
| 131 | ISO 5725-1:1994 Part 1: General principles and definitions |
| 132 | ISO 5725-2:1994 Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| 133 | ISO 5725-3:1994 Part 3: Intermediate measures of the precision of a standard measurement method |
| 134 | ISO 5725-4:1994 Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| 135 | ISO 5725-5:1998 Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| 136 | ISO 5725-6:1994 Part 6: Use in practice of accuracy values |
| 137 | ISO 5742:2004 Pliers and nippers – Nomenclature |
| 138 | ISO 5775 Bicycle tires and rims |
| 139 | ISO 5776 Graphic technology – Symbols for text correction |
| 140 | ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed |
| 141 | ISO 5806:1984 Information processing – Specification of single-hit decision tables |
| 142 | ISO 5807:1985 Information processing – Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts |
| 143 | ISO 5826:2014 Resistance welding equipment – Transformers – General specifications applicable to all transformers |
| 144 | ISO 5832 Implants for surgery – Metallic materials |
| 145 | ISO 5832-1:2016 Part 1: Wrought stainless steel |
| 146 | ISO 5832-2:1999 Part 2: Unalloyed titanium |
| 147 | ISO 5832-3:2016 Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| 148 | ISO 5832-4:2014 Part 4: Cobalt-chromium-molybdenum casting alloy |
| 149 | ISO 5832-5:2005 Part 5: Wrought cobalt-chromium-tungsten-nickel alloy |
| 150 | ISO 5832-6:1997 Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
| 151 | ISO 5832-7:2016 Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| 152 | ISO 5832-8:1997 Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy |
| 153 | ISO 5832-9:2007 Part 9: Wrought high nitrogen stainless steel |
| 154 | ISO 5832-11:2014 Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| 155 | ISO 5832-12:2007 Part 12: Wrought cobalt-chromium-molybdenum alloy |
| 156 | ISO 5832-14:2007 Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
| 157 | ISO 5833:2002 Implants for surgery – Acrylic resin cements |
| 158 | ISO 5834 Implants for surgery – Ultra-high-molecular-weight polyethylene |
| 159 | ISO 5834-1:2005 Part 1: Powder form |
| 160 | ISO 5834-2:2011 Part 2: Moulded forms |
| 161 | ISO 5834-3:2005 Part 3: Accelerated ageing methods |
| 162 | ISO 5834-4:2005 Part 4: Oxidation index measurement method |
| 163 | ISO 5834-5:2005 Part 5: Morphology assessment method |
| 164 | ISO 5835:1991 Implants for surgery – Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread – Dimensions |
| 165 | ISO 5836:1988 Implants for surgery – Metal bone plates – Holes corresponding to screws with asymmetrical thread and spherical under-surface |
| 166 | ISO 5837 Implants for surgery – Intramedullary nailing systems |
| 167 | ISO 5837-1:1985 Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section |
| 168 | ISO 5838 Implants for surgery – Metallic skeletal pins and wires[Note 3] |
| 169 | ISO 5838-1:2013 Part 1: General requirements |
| 170 | ISO 5838-2:1991 Part 2: Steinmann skeletal pins – Dimensions |
| 171 | ISO 5838-3:1993 Part 3: Kirschner skeletal wires |
| 172 | ISO 5840 Cardiovascular implants – Cardiac valve prostheses |
| 173 | ISO 5840-1:2015 Part 1: General requirements |
| 174 | ISO 5840-2:2015 Part 2: Surgically implanted heart valve substitutes |
| 175 | ISO 5840-3:2013 Part 3: Heart valve substitutes implanted by transcatheter techniques |
| 176 | ISO 5841 Implants for surgery – Cardiac pacemakers |
| 177 | ISO 5841-2:2014 Part 2: Reporting of clinical performance of populations of pulse generators or leads |
| 178 | ISO 5841-3:2013 Part 3: Low-profile connectors (IS-1) for implantable pacemakers |
| 179 | ISO 5843 Aerospace – List of equivalent terms[Note 3] |
| 180 | ISO 5843-1:1985 Part 1: Aerospace electrical equipment |
| 181 | ISO 5843-2:1990 Part 2: Aerospace rivets |
| 182 | ISO 5843-3:1997 Part 3: Aerospace bolts and nuts |
| 183 | ISO 5843-4:1990 Part 4: Flight dynamics |
| 184 | ISO 5843-5:1990 Part 5: Environmental and operating conditions for aircraft equipment |
| 185 | ISO 5843-6:1985 Part 6: Standard atmosphere |
| 186 | ISO 5843-8:1988 Part 8: Aircraft reliability |
| 187 | ISO 5843-9:1988 Part 9: Aircraft |
| 188 | ISO 5843-10:1988 Part 10: Aircraft structure |
| 189 | ISO 5845 Technical drawings – Simplified representation of the assembly of parts with fasteners |
| 190 | ISO 5845-1:1995 Part 1: General principles |
| 191 | ISO 5845-2:1995 Part 2: Rivets for aerospace equipment |
| 192 | ISO 5859:2014 Aerospace series – Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components |
| 193 | ISO 5878:1982 Reference atmospheres for aerospace use |
| 194 | ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification |
| 195 | ISO 5963:1985 Documentation – Methods for examining documents, determining their subjects, and selecting indexing terms |
| 196 | ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri |
| 197 | ISO 5967:1981 Taps and thread cutting – Nomenclature of the main types and terminology |
| 198 | ISO 5968:1981 Circular screwing dies – Terminology |
| 199 | ISO 5971:1981 Size designation of clothes – Pantyhose |
| 200 | ISO 5989:1995 Photography – Pre-packaged chemicals for the processing of silver halide based photographic materials – Vocabulary |
| 201 | ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method |
| 202 | ISO 6009:2016 Hypodermic needles for single use – Colour coding for identification |
| 203 | ISO 6011:2003 Earth-moving machinery – Visual display of machine operation |
| 204 | ISO 6050:1987 Shipbuilding – Bulbous bow and side thruster symbols |
| 205 | ISO 6068:1985 Information processing – Recording characteristics of instrumentation magnetic tape (including telemetry systems) – Interchange requirements |
| 206 | ISO 6070:1981 Auxiliary tables for vibration generators – Methods of describing equipment characteristics |
| 207 | ISO 6078:1982 Black tea – Vocabulary |
| 208 | ISO 6093:1985 Information processing – Representation of numerical values in character strings for information interchange |
| 209 | ISO 6098:1984 Information processing – Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape |
| 210 | ISO 6107 Water quality—Vocabulary |
| 211 | ISO 6107-1:2004 (No part title) |
| 212 | ISO 6107-2:2006 (No part title) |
| 213 | ISO 6107-3:1993 (No part title) |
| 214 | ISO 6107-4:1993 (No part title) |
| 215 | ISO 6107-5:2004 (No part title) |
| 216 | ISO 6107-6:2004 (No part title) |
| 217 | ISO 6107-7:2006 (No part title) |
| 218 | ISO 6107-8:1993 (No part title) |
| 219 | ISO 6107-9:1997 Part 9: Alphabetical list and subject index |
| 220 | ISO 6152:1982 Thermometers for use with alcoholometers and alcohol hydrometers |
| 221 | ISO 6160:1979 Programming languages – PL/1 |
| 222 | ISO 6165:2012 Earth-moving machinery – Basic types – Identification and terms and definitions |
| 223 | ISO 6166:2013 Securities and related financial instruments – International securities identification numbering system (ISIN) |
| 224 | ISO 6173:1982 Open-end spinning machines – Vocabulary |
| 225 | ISO 6188:1986 Plastics — Poly(alkylene terephthalate) granules — Determination of water content [Withdrawn: replaced with ISO 15512] |
| 226 | ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements |
| 227 | ISO 6194-2:2009 Part 2: Vocabulary |
| 228 | ISO 6194-5 Identification of visual imperfections |
| 229 | ISO 6196 Micrographics – Vocabulary |
| 230 | ISO 6196-1:1993 Part 1: General terms |
| 231 | ISO 6196-2:1993 Part 2: Image positions and methods of recording |
| 232 | ISO 6196-3:1997 Part 3: Film processing |
| 233 | ISO 6196-4:1998 Part 4: Materials and packaging |
| 234 | ISO 6196-5:1987 Part 5: Quality of images, legibility, inspection |
| 235 | ISO 6196-6:1992 Part 6: Equipment |
| 236 | ISO 6196-7:1992 Part 7: Computer micrographics |
| 237 | ISO 6196-8:1998 Part 8: Use |
| 238 | ISO 6196-10:1999 Part 10: Index |
| 239 | ISO 6206:1979 Chemical products for industrial use – Sampling – Vocabulary |
| 240 | ISO 6217:1982 Shipbuilding – Inland navigation – Pilot craft – Identification painting and inscriptions |
| 241 | ISO 6222:1999 Water quality – Enumeration of culturable micro-organisms – Colony count by inoculation in a nutrient agar culture medium |
| 242 | ISO 6284:1996 Construction drawings – Indication of limit deviations |
| 243 | ISO 6289:2003 Skis – Vocabulary |
| 244 | ISO 6336 Calculation of load capacity of spur and helical gears |
| 245 | ISO 6344 Coated abrasives – Grain size analysis |
| 246 | ISO 6345:1990 Shipbuilding and marine structures – Windows and side scuttles – Vocabulary |
| 247 | ISO 6346 Freight containers – Coding, identification and marking |
| 248 | ISO 6348:1980 Textiles – Determination of mass – Vocabulary |
| 249 | ISO 6352:1985 Ferronickel – Determination of nickel content – Dimethylglyoxime gravimetric method |
| 250 | ISO 6354:1982 Adhesives – Vocabulary [Withdrawn: replaced with ISO 472] |
| 251 | ISO 6355:1988 Textile glass – Vocabulary [Withdrawn: replaced with ISO 472] |
| 252 | ISO 6357:1985 Documentation – Spine titles on books and other publications |
| 253 | ISO 6372:2017 Nickel and nickel alloys – Terms and definitions |
| 254 | ISO 6385:2016 Ergonomics principles in the design of work systems |
| 255 | ISO 6393:2008 Earth-moving machinery – Determination of sound power level – Stationary test conditions |
| 256 | ISO 6394:2008 Earth-moving machinery – Determination of emission sound pressure level at operator’s position – Stationary test conditions |
| 257 | ISO 6395:2008 Earth-moving machinery – Determination of sound power level – Dynamic test conditions |
| 258 | ISO 6396:2008 Earth-moving machinery – Determination of emission sound pressure level at operator’s position – Dynamic test conditions |
| 259 | ISO 6405 Earth-moving machinery – Symbols for operator controls and other displays |
| 260 | ISO 6405-1:2017 Part 1: Common symbols |
| 261 | ISO 6405-2:2017 Part 2: Symbols for specific machines, equipment and accessories |
| 262 | ISO 6410 Technical drawings – Screw threads and threaded parts |
| 263 | ISO 6410-1:1993 Part 1: General conventions |
| 264 | ISO 6410-2:1993 Part 2: Screw thread inserts |
| 265 | ISO 6410-3:1993 Part 3: Simplified representation |
| 266 | ISO 6411:1982 Technical drawings – Simplified representation of centre holes |
| 267 | ISO 6412 Technical drawings – Simplified representation of pipelines |
| 268 | ISO 6412-1:2017 Part 1: General rules and orthogonal representation |
| 269 | ISO 6412-2:2017 Part 2: Isometric projection |
| 270 | ISO 6412-3:2017 Part 3: Terminal features of ventilation and drainage systems |
| 271 | ISO 6413:1988 Technical drawings – Representation of splines and serrations |
| 272 | ISO 6414:1982 Technical drawings for glassware |
| 273 | ISO 6416:2017 Hydrometry – Measurement of discharge by the ultrasonic transit time (time of flight) method |
| 274 | ISO 6420:2016 Hydrometry – Position fixing equipment for hydrometric boats |
| 275 | ISO 6421:2012 Hydrometry – Methods for assessment of reservoir sedimentation |
| 276 | ISO 6422 Layout key for trade documents |
| 277 | ISO 6422-1:2010 Part 1: Paper-based documents |
| 278 | ISO 6425:1996 Divers’ watches |
| 279 | ISO 6426 Horological vocabulary |
| 280 | ISO 6426-1:1982 Part 1: Technical and scientific definitions |
| 281 | ISO 6426-2:2002 Part 2: Technical and commercial definitions |
| 282 | ISO 6428:1982 Technical drawings – Requirements for microcopying |
| 283 | ISO/IEC 6429:1992 Information technology – Control functions for coded character sets |
| 284 | ISO 6433:2012 Technical product documentation – Part references |
| 285 | ISO 6438:1983 Documentation – African coded character set for bibliographic information interchange |
| 286 | ISO 6461 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) |
| 287 | ISO 6461-1:1986 Part 1: Method by enrichment in a liquid medium |
| 288 | ISO 6461-2:1986 Part 2: Method by membrane filtration |
| 289 | ISO 6467:1980 Ferrovanadium – Determination of vanadium content – Potentiometric method |
| 290 | ISO 6472:2017 Rubber compounding ingredients – Abbreviated terms |
| 291 | ISO 6474 Implants for surgery – Ceramic materials |
| 292 | ISO 6474-1:2010 Part 1: Ceramic materials based on high purity alumina |
| 293 | ISO 6474-2:2012 Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| 294 | ISO 6475:1989 Implants for surgery – Metal bone screws with asymmetrical thread and spherical under-surface – Mechanical requirements and test methods |
| 295 | ISO 6501:1988 Ferronickel – Specification and delivery requirements |
| 296 | ISO 6512:1982 Building construction — Modular coordination — Storey heights and room heights [Withdrawn: replaced with ISO 21723] |
| 297 | ISO 6513:1982 Building construction — Modular coordination — Series of preferred multimodular sizes for horizontal dimensions [Withdrawn: replaced with ISO 21723] |
| 298 | ISO 6514:1982 Building construction — Modular coordination — Sub-modular increments [Withdrawn: replaced with ISO 21723] |
| 299 | ISO 6518 Road vehicles – Ignition systems |
| 300 | ISO 6518-1:2002 Part 1: Vocabulary |
| 301 | ISO/IEC 6522:1992 Information technology – Programming languages – PL/1 general purpose subset |
| 302 | ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts |
| 303 | ISO 6531:2017 Machinery for forestry – Portable chain-saws – Vocabulary |
| 304 | ISO 6552:1980 Automatic steam traps – Definition of technical terms |
| 305 | ISO 6579 Microbiology of the food chain – Horizontal method for the detection, enumeration and serotyping of Salmonella[Note 3] |
| 306 | ISO 6579-1:2017 Part 1: Detection of Salmonella spp. |
| 307 | ISO/TS 6579-2:2012 Part 2: Enumeration by a miniaturized most probable number technique |
| 308 | ISO/TR 6579-3:2014 Part 3: Guidelines for serotyping of Salmonella spp. |
| 309 | ISO 6586:1980 Data processing – Implementation of the ISO 7- bit and 8- bit coded character sets on punched cards |
| 310 | ISO 6590 Packaging – Sacks – Vocabulary and types |
| 311 | ISO 6590-1:1983 Part 1: Paper sacks |
| 312 | ISO 6590-2:1986 Part 2: Sacks made from thermoplastic flexible film |
| 313 | ISO 6594 Cast iron drainage pipes and fittings – Spigot series |
| 314 | ISO 6596 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using two-frequency recording at 7 958 ftprad, 1.9 tpmm (48 tpi), on one side |
| 315 | ISO 6596-1:1985 Part 1: Dimensional, physical and magnetic characteristics |
| 316 | ISO 6596-2:1985 Part 2: Track format |
| 317 | ISO 6611:2004 Milk and milk products – Enumeration of colony-forming units of yeasts and/or moulds – Colony-count technique at 25 degrees C |
| 318 | ISO 6621 Internal combustion engines – Piston rings |
| 319 | ISO 6621-1:2007 Part 1: Vocabulary |
| 320 | ISO 6630:1986 Documentation – Bibliographic control characters |
| 321 | ISO 6689 Equipment for harvesting – Combines and functional components |
| 322 | ISO 6689-1:1997 Part 1: Vocabulary |
| 323 | ISO 6706:1981 Plastics laboratory ware – Graduated measuring cylinders |
| 324 | ISO 6707 Buildings and civil engineering works – Vocabulary |
| 325 | ISO 6707-1:2014 Part 1: General terms |
| 326 | ISO 6707-2:2014 Part 2: Contract terms |
| 327 | ISO 6707-3:2017 Part 3: Sustainability terms |
| 328 | ISO 6709:2008 Standard representation of geographic point location by coordinates |
| 329 | ISO 6710:2017 Single-use containers for human venous blood specimen collection |
| 330 | ISO 6725:1981 Road vehicles – Dimensions of two-wheeled mopeds and motorcycles – Terms and definitions |
| 331 | ISO 6726:1988 Mopeds and motorcycles with two wheels – Masses – Vocabulary |
| 332 | ISO 6727:2012 Road vehicles – Motorcycles – Symbols for controls, indicators and tell-tales |
| 333 | ISO 6730:2005 Milk – Enumeration of colony-forming units of psychrotrophic microorganisms – Colony-count technique at 6,5 degrees C |
| 334 | ISO 6747:2013 Earth-moving machinery – Dozers – Terminology and commercial specifications |
| 335 | ISO 6780:2003 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances, reviewed and confirmed 2014 [3] |
| 336 | ISO 6798:1995 Reciprocating internal combustion engines – Measurement of emitted airborne noise – Engineering method and survey method |
| 337 | ISO 6811:1998 Spherical plain bearings – Vocabulary |
| 338 | ISO 6813:1998 Road vehicles – Collision classification – Terminology |
| 339 | ISO 6814:2009 Machinery for forestry – Mobile and self-propelled machinery – Terms, definitions and classification |
| 340 | ISO 6861:1996 Information and documentation – Glagolitic alphabet coded character set for bibliographic information interchange |
| 341 | ISO 6862:1996 Information and documentation – Mathematical coded character set for bibliographic information interchange |
| 342 | ISO 6871 Dental base metal casting alloys |
| 343 | ISO 6871-1:1994 Part 1: Cobalt-based alloys [Withdrawn: replaced with ISO 22674] |
| 344 | ISO 6871-2:1994 Part 2: Nickel-based alloys [Withdrawn: replaced with ISO 22674] |
| 345 | ISO 6883:2017 Animal and vegetable fats and oils – Determination of conventional mass per volume (litre weight in air) |
| 346 | ISO 6887 Microbiology of the food chain – Preparation of test samples, initial suspension and decimal dilutions for microbiological examination[Note 3] |
| 347 | ISO 6887-1:2017 Part 1: General rules for the preparation of the initial suspension and decimal dilutions |
| 348 | ISO 6887-2:2017 Part 2: Specific rules for the preparation of meat and meat products |
| 349 | ISO 6887-3:2017 Part 3: Specific rules for the preparation of fish and fishery products |
| 350 | ISO 6887-4:2017 Part 4: Specific rules for the preparation of miscellaneous products |
| 351 | ISO 6887-5:2010 Part 5: Specific rules for the preparation of milk and milk products |
| 352 | ISO 6887-6:2013 Part 6: Specific rules for the preparation of samples taken at the primary production stage |
| 353 | ISO 6888 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) |
| 354 | ISO 6888-1:1999 Part 1: Technique using Baird-Parker agar medium |
| 355 | ISO 6888-2:1999 Part 2: Technique using rabbit plasma fibrinogen agar medium |
| 356 | ISO 6888-3:2003 Part 3: Detection and MPN technique for low numbers |
| 357 | ISO 6892 Metallic materials – Tensile testing |
| 358 | ISO 6892-1 Method of test at room temperature |
| 359 | ISO 6892-2 Method of test at elevated temperature |
| 360 | ISO 6892-3 Method of test at low temperature |
| 361 | ISO 6892-4 Method of test in liquid helium |
| 362 | ISO 6926:2016 Acoustics – Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| 363 | ISO 6927:2012 Buildings and civil engineering works – Sealants – Vocabulary |
| 364 | ISO 6929:2013 Steel products – Vocabulary |
| 365 | ISO 6936:1988 Information processing – Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA 2) |
| 366 | ISO/IEC 6937:2001 Information technology – Coded graphic character set for text communication – Latin alphabet |
| 367 | ISO 6938:2012 Textiles – Natural fibres – Generic names and definitions |
| 368 | ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method |
| 369 | ISO 6951:1986 Information processing – Processor system bus interface (Eurobus A) |
| 370 | ISO 6974-1:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 1: General guidelines and calculation of composition |
| 371 | ISO 6974-2:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 2: Uncertainty calculations |
| 372 | ISO 6974-3:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| 373 | ISO 6974-4:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| 374 | ISO 6974-5:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns |
| 375 | ISO 6974-6: 2008 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
| 376 | ISO 6980 Nuclear energy – Reference beta-particle radiation |
| 377 | ISO 6980-1:2006 Part 1: Methods of production |
| 378 | ISO 6980-2:2004 Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field |
| 379 | ISO 6980-3:2006 Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence |
| 380 | ISO 7000:2014 Graphical symbols for use on equipment – Registered symbols |
| 381 | ISO 7001:2007 Graphical symbols – Public information symbols |
| 382 | ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot |
| 383 | ISO 7010:2011 Graphical symbols – Safety colours and safety signs – Registered safety signs |
| 384 | ISO 7029:2017 Acoustics – Statistical distribution of hearing thresholds related to age and gender |
| 385 | ISO 7056:1981 Plastics laboratory ware – Beakers |
| 386 | ISO/IEC 7064:2003 Information technology – Security techniques – Check character systems |
| 387 | ISO 7065 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides |
| 388 | ISO 7065-1:1985 Part 1: Dimensional, physical and magnetic characteristics |
| 389 | ISO 7065-2:1985 Part 2: Track format |
| 390 | ISO 7066 Assessment of uncertainty in the calibration and use of flow measurement devices |
| 391 | ISO 7066-2:1988 Part 2: Non-linear calibration relationships |
| 392 | ISO 7078:1985 Building construction – Procedures for setting out, measurement and surveying – Vocabulary and guidance notes |
| 393 | ISO 7083:1983 Technical drawings – Symbols for geometrical tolerancing – Proportions and dimensions |
| 394 | ISO 7087:1984 Ferroalloys – Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling |
| 395 | ISO 7088:1981 Fish-meal – Vocabulary |
| 396 | ISO 7089:2000 Plain washers — Normal series — Product grade A |
| 397 | ISO 7090:2000 Plain washers, chamfered — Normal series — Product grade A |
| 398 | ISO 7091:2000 Plain washers — Normal series — Product grade C |
| 399 | ISO 7092:2000 Plain washers — Small series — Product grade A |
| 400 | ISO 7093:2000 Plain washers — Large series |
| 401 | ISO 7098:2015 Information and documentation – Romanization of Chinese |
| 402 | ISO 7112:2017 Machinery for forestry – Portable brush-cutters and grass-trimmers – Vocabulary |
| 403 | ISO 7130:2013 Earth-moving machinery – Operator training – Content and methods |
| 404 | ISO 7131:2009 Earth-moving machinery – Loaders – Terminology and commercial specifications |
| 405 | ISO 7132:2003 Earth-moving machinery – Dumpers – Terminology and commercial specifications |
| 406 | ISO 7133:2013 Earth-moving machinery – Scrapers – Terminology and commercial specifications |
| 407 | ISO 7134:2013 Earth-moving machinery – Graders – Terminology and commercial specifications |
| 408 | ISO 7135:2009 Earth-moving machinery – Hydraulic excavators – Terminology and commercial specifications |
| 409 | ISO 7136:2006 Earth-moving machinery – Pipelayers – Terminology and commercial specifications |
| 410 | ISO 7137:1995 Aircraft – Environmental conditions and test procedures for airborne equipment |
| 411 | ISO 7144:1986 Documentation – Presentation of theses and similar documents |
| 412 | ISO 7151:1988 Surgical instruments – Non-cutting, articulated instruments – General requirements and test methods |
| 413 | ISO 7152:1997 Camping tents and caravan awnings – Vocabulary and list of equivalent terms |
| 414 | ISO 7153 Surgical instruments – Materials |
| 415 | ISO 7153-1:2016 Part 1: Metals |
| 416 | ISO 7154:1983 Documentation – Bibliographic filing principles |
| 417 | ISO 7176 Wheelchairs |
| 418 | ISO 7176-21:2009 Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
| 419 | ISO 7176-26:2007 Part 26: Vocabulary |
| 420 | ISO 7185:1990 Information technology – Programming languages – Pascal |
| 421 | ISO 7194:2008 Measurement of fluid flow in closed conduits – Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
| 422 | ISO 7196:1995 Acoustics – Frequency-weighting characteristic for infrasound measurements |
| 423 | ISO 7197:2006 Neurosurgical implants – Sterile, single-use hydrocephalus shunts and components |
| 424 | ISO 7198:2016 Cardiovascular implants and extracorporeal systems – Vascular prostheses – Tubular vascular grafts and vascular patches |
| 425 | ISO 7199:2016 Cardiovascular implants and artificial organs – Blood-gas exchangers (oxygenators) |
| 426 | ISO 7200:2004 Technical product documentation – Data fields in title blocks and document headers |
| 427 | ISO 7206 Implants for surgery – Partial and total hip joint prostheses |
| 428 | ISO 7206-1:2008 Part 1: Classification and designation of dimensions |
| 429 | ISO 7206-2:2011 Part 2: Articulating surfaces made of metallic, ceramic and plastics materials |
| 430 | ISO 7206-4:2010 Part 4: Determination of endurance properties and performance of stemmed femoral components |
| 431 | ISO 7206-6:2013 Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components |
| 432 | ISO 7206-10:2003 Part 10: Determination of resistance to static load of modular femoral heads |
| 433 | ISO 7206-12:2016 Part 12: Deformation test method for acetabular shells |
| 434 | ISO 7206-13:2016 Part 13: Determination of resistance to torque of head fixation of stemmed femoral components |
| 435 | ISO 7207 Implants for surgery – Components for partial and total knee joint prostheses |
| 436 | ISO 7207-1:2007 Part 1: Classification, definitions and designation of dimensions |
| 437 | ISO 7207-2:2011 Part 2: Articulating surfaces made of metal, ceramic and plastics materials |
| 438 | ISO 7216:2015 Agricultural and forestry tractors – Measurement of noise emitted when in motion |
| 439 | ISO 7218:2007 Microbiology of food and animal feeding stuffs – General requirements and guidance for microbiological examinations |
| 440 | ISO 7220:1996 Information and documentation – Presentation of catalogues of standards |
| 441 | ISO 7237:1993 Caravans – Masses and dimensions – Vocabulary |
| 442 | ISO 7240 Fire detection and alarm systems |
| 443 | ISO 7251:2005 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of presumptive Escherichia coli – Most probable number technique |
| 444 | ISO 7255:1985 Shipbuilding – Active control units of ships – Vocabulary |
| 445 | ISO 7275:1985 Documentation – Presentation of title information of series |
| 446 | ISO 7287:2002 Graphical symbols for thermal cutting equipment |
| 447 | ISO 7294:1983 Saw teeth for woodworking saws – Profile shape – Terminology and designation |
| 448 | ISO 7296 Cranes – Graphic symbols |
| 449 | ISO 7296-1:1991 Part 1: General |
| 450 | ISO 7296-2:1996 Part 2: Mobile cranes |
| 451 | ISO 7296-3:2006 Part 3: Tower cranes |
| 452 | ISO 7297:1985 Information processing – Magnetic disk for data storage devices – 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter |
| 453 | ISO 7298:1985 Information processing – Magnetic disk for data storage devices – 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter |
| 454 | ISO 7345:1987 Thermal insulation – Physical quantities and definitions |
| 455 | ISO 7347:1987 Ferroalloys – Experimental methods for checking the bias of sampling and sample preparation |
| 456 | ISO 7348:1992 Glass containers – Manufacture – Vocabulary |
| 457 | ISO/IEC 7350:1991 Information technology – Registration of repertoires of graphic characters from ISO/IEC 10367 |
| 458 | ISO 7369:2004 Pipework – Metal hoses and hose assemblies – Vocabulary |
| 459 | ISO 7372:2005 Trade data interchange – Trade data elements directory |
| 460 | ISO 7373:1987 Ferroalloys – Experimental methods for checking the precision of sample division |
| 461 | ISO 7376:2009 Anaesthetic and respiratory equipment – Laryngoscopes for tracheal intubation |
| 462 | ISO 7380 Button Head Screws |
| 463 | ISO 7380-1:2011 Part 1: Hexagon socket button head screws |
| 464 | ISO 7380-2:2011 Part 2: Hexagon socket button head screws with collar |
| 465 | ISO 7396 Medical gas pipeline systems |
| 466 | ISO 7396-1:2016 Part 1: Pipeline systems for compressed medical gases and vacuum |
| 467 | ISO 7396-2:2007 Part 2: Anaesthetic gas scavenging disposal systems |
| 468 | ISO 7404 Methods for the petrographic analysis of coals |
| 469 | ISO 7404-1:2016 Part 1: Vocabulary |
| 470 | ISO 7437:1990 Technical drawings – Construction drawings – General rules for execution of production drawings for prefabricated structural components |
| 471 | ISO 7462:1985 Shipbuilding – Principal ship dimensions – Terminology and definitions for computer applications |
| 472 | ISO 7478:1987 Information processing systems – Data communication – Multilink procedures |
| 473 | ISO 7479:1982 Textile machinery and accessories — Metal reeds with plastic baulk [Withdrawn: replaced with ISO 366-4] |
| 474 | ISO/IEC 7480:1991 Information technology – Telecommunications and information exchange between systems – Start-stop transmission signal quality at DTE/DCE interfaces |
| 475 | ISO 7482 Raw goat skins |
| 476 | ISO 7482-1:1998 Part 1: Descriptions of defects |
| 477 | ISO/IEC 7487 Information technology – Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides – ISO type 202 |
| 478 | ISO/IEC 7487-1:1993 Part 1: Dimensional, physical and magnetic characteristics |
| 479 | ISO 7487-2:1985 Part 2: Track format A |
| 480 | ISO 7487-3:1986 Part 3: Track format B |
| 481 | ISO 7489:1986 Dental glass polyalkenoate cements [Withdrawn: replaced with ISO 9917] |
| 482 | ISO/IEC 7498 Information technology — Open Systems Interconnection — Basic Reference Model[Note 3] |
| 483 | ISO/IEC 7498-1:1994 The Basic Model |
| 484 | ISO 7498-2:1989 Part 2: Security Architecture |
| 485 | ISO/IEC 7498-3:1997 Naming and addressing |
| 486 | ISO/IEC 7498-4:1989 Part 4: Management framework |
| 487 | ISO/IEC 7501 Identification cards – Machine readable travel documents |
| 488 | ISO/IEC 7501-1:2008 Part 1: Machine readable passport |
| 489 | ISO/IEC 7501-2:1997 Part 2: Machine readable visa |
| 490 | ISO/IEC 7501-3:2005 Part 3: Machine readable official travel documents |
| 491 | ISO 7504:2015 Gas analysis – Vocabulary |
| 492 | ISO 7518:1983 Technical drawings – Construction drawings – Simplified representation of demolition and rebuilding |
| 493 | ISO 7519:1991 Technical drawings – Construction drawings – General principles of presentation for general arrangement and assembly drawings |
| 494 | ISO 7520:1985 Ferronickel – Determination of cobalt content – Flame atomic absorption spectrometric method |
| 495 | ISO 7524:1985 Nickel, ferronickel and nickel alloys – Determination of carbon content – Infra-red absorption method after induction furnace combustion |
| 496 | ISO 7526:1985 Nickel, ferronickel and nickel alloys – Determination of sulfur content – Infra-red absorption method after induction furnace combustion |
| 497 | ISO 7527:1985 Nickel, ferronickel and nickel alloys – Determination of sulfur content – Iodimetric titration method after induction furnace combustion |
| 498 | ISO 7550:1985 Laboratory glassware – Disposable micropipettes |
| 499 | ISO 7563:1998 Fresh fruits and vegetables – Vocabulary |
| 500 | ISO 7568:1986 Woodworking machines – Thickness planing machines with rotary cutterblock for one-side dressing – Nomenclature and acceptance conditions |
| 501 | ISO 7569:1986 Woodworking machines – Planing machines for two-, three- or four-side dressing – Nomenclature and acceptance conditions |
| 502 | ISO 7570:1986 Woodworking machines – Surface planing and thicknessing machines – Nomenclature and acceptance conditions |
| 503 | ISO 7571:1986 Woodworking machines – Surface planing machines with cutterblock for one-side dressing – Nomenclature and acceptance conditions |
| 504 | ISO 7573:2008 Technical product documentation – Parts lists |
| 505 | ISO 7574 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment |
| 506 | ISO 7574-1:1985 Part 1: General considerations and definitions |
| 507 | ISO 7574-2:1985 Part 2: Methods for stated values for individual machines |
| 508 | ISO 7574-3:1985 Part 3: Simple (transition) method for stated values for batches of machines |
| 509 | ISO 7574-4:1985 Part 4: Methods for stated values for batches of machines |
| 510 | ISO 7583:2013 Anodizing of aluminium and its alloys – Terms and definitions |
| 511 | ISO 7626 Mechanical vibration and shock – Experimental determination of mechanical mobility[Note 3] |
| 512 | ISO 7626-1:2011 Part 1: Basic terms and definitions, and transducer specifications |
| 513 | ISO 7626-2:2015 Part 2: Measurements using single-point translation excitation with an attached vibration exciter |
| 514 | ISO 7626-5:1994 Part 5: Measurements using impact excitation with an exciter which is not attached to the structure |
| 515 | ISO 7637 Road vehicles – Electrical disturbances from conduction and coupling |
| 516 | ISO 7637-1:2015 Part 1: Definitions and general considerations |
| 517 | ISO 7639:1985 Road vehicles – Diagnostic systems – Graphical symbols |
| 518 | ISO 7665:1983 Information processing – File structure and labelling of flexible disk cartridges for information interchange |
| 519 | ISO 7692:1983 Ferrotitanium – Determination of titanium content – Titrimetric method |
| 520 | ISO 7693:1984 Ferrotungsten – Determination of tungsten content – Cinchonine gravimetric method |
| 521 | ISO 7704:1985 Water quality – Evaluation of membrane filters used for microbiological analyses |
| 522 | ISO 7711 Dentistry – Diamond rotary instruments |
| 523 | ISO 7711-3:2004 Part 3: Grit sizes, designation and colour code |
| 524 | ISO 7712:1983 Laboratory glassware – Disposable Pasteur pipettes |
| 525 | ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections |
| 526 | ISO 7740:1985 Instruments for surgery – Scalpels with detachable blades – Fitting dimensions |
| 527 | ISO 7741:1986 Instruments for surgery – Scissors and shears – General requirements and test methods |
| 528 | ISO/IEC 7776:1995 Information technology – Telecommunications and information exchange between systems – High-level data link control procedures – Description of the X.25 LAPB-compatible DTE data link procedures |
| 529 | ISO 7779:2010 Acoustics – Measurement of airborne noise emitted by information technology and telecommunications equipment |
| 530 | ISO/IEC 7810 Identification cards – Physical characteristics |
| 531 | ISO/IEC 7811 Identification cards – Recording technique |
| 532 | ISO/IEC 7812 Identification cards – Identification of issuers |
| 533 | ISO/IEC 7813:2006 Information technology – Identification cards – Financial transaction cards |
| 534 | ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3] |
| 535 | ISO 7830:1983 Photography — Safety photographic films other than motion picture films — Material specifications Withdrawn: replaced with ISO 543, later ISO 18906 |
| 536 | ISO 7839:2005 Textile machinery and accessories – Knitting machines – Vocabulary and classification |
| 537 | ISO/TS 7849 Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement |
| 538 | ISO/TS 7849-1:2009 Part 1: Survey method using a fixed radiation factor |
| 539 | ISO/TS 7849-2:2009 Part 2: Engineering method including determination of the adequate radiation factor |
| 540 | ISO 7863:1984 Height setting micrometers and riser blocks |
| 541 | ISO 7864:2016 Sterile hypodermic needles for single use – Requirements and test methods |
| 542 | ISO 7870 Control charts |
| 543 | ISO 7870-1:2014 Part 1: General guidelines |
| 544 | ISO 7870-2:2013 Part 2: Shewhart control charts |
| 545 | ISO 7870-3:2012 Part 3: Acceptance control charts |
| 546 | ISO 7870-4:2011 Part 4: Cumulative sum charts |
| 547 | ISO 7870-5:2014 Part 5: Specialized control charts |
| 548 | ISO 7870-6:2016 Part 6: EWMA control charts |
| 549 | ISO 7870-8:2017 Part 8: Charting techniques for short runs and small mixed batches |
| 550 | ISO 7876 Fuel injection equipment – Vocabulary |
| 551 | ISO 7876-1:1990 Part 1: Fuel injection pumps |
| 552 | ISO 7876-2:1991 Part 2: Fuel injectors |
| 553 | ISO 7876-3:1993 Part 3: Unit injectors |
| 554 | ISO 7876-4:2004 Part 4: High-pressure pipes and end-connections |
| 555 | ISO 7876-5:2004 Part 5: Common rail fuel injection system |
| 556 | ISO 7885:2010 Dentistry – Sterile injection needles for single use |
| 557 | ISO 7886 Sterile hypodermic syringes for single use |
| 558 | ISO 7886-1:2017 Part 1: Syringes for manual use |
| 559 | ISO 7886-2:1996 Part 2: Syringes for use with power-driven syringe pumps |
| 560 | ISO 7886-3:2005 Part 3: Auto-disable syringes for fixed-dose immunization |
| 561 | ISO 7886-4:2006 Part 4: Syringes with re-use prevention feature |
| 562 | ISO 7889:2003 Yogurt – Enumeration of characteristic microorganisms – Colony-count technique at 37 degrees C |
| 563 | ISO 7899 Water quality – Detection and enumeration of intestinal enterococci |
| 564 | ISO 7899-1:1998 Part 1: Miniaturized method (Most Probable Number) for surface and waste water |
| 565 | ISO 7899-2:2000 Part 2: Membrane filtration method |
| 566 | ISO 7919 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts |
| 567 | ISO 7919-3:2009 Part 3: Coupled industrial machines |
| 568 | ISO 7919-4:2009 Part 4: Gas turbine sets with fluid-film bearings |
| 569 | ISO 7919-5:2005 Part 5: Machine sets in hydraulic power generating and pumping plants |
| 570 | ISO 7929:1985 Information processing – Magnetic disk for data storage devices – 83 000 flux transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter |
| 571 | ISO 7932:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of presumptive Bacillus cereus – Colony-count technique at 30 degrees C |
| 572 | ISO 7937:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of Clostridium perfringens – Colony-count technique |
| 573 | ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS) |
| 574 | ISO 7944:1998 Optics and optical instruments – Reference wavelengths |
| 575 | ISO 7945:1985 Woodworking machines – Single spindle boring machines – Nomenclature and acceptance conditions |
| 576 | ISO 7946:1985 Woodworking machines – Slot mortising machines – Nomenclature and acceptance conditions |
| 577 | ISO 7947:1985 Woodworking machines – Two-, three- and four-side moulding machines – Nomenclature and acceptance conditions |
| 578 | ISO 7948:1987 Woodworking machines – Routing machines – Nomenclature and acceptance conditions |
| 579 | ISO 7949:1985 Woodworking machines – Veneer pack edge shears – Nomenclature and acceptance conditions |
| 580 | ISO 7950:1985 Woodworking machines – Single chain mortising machines – Nomenclature and acceptance conditions |
| 581 | ISO 7957:1987 Woodworking machines – Radial circular saws – Nomenclature and acceptance conditions |
| 582 | ISO 7958:1987 Woodworking machines – Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels – Nomenclature and acceptance conditions |
| 583 | ISO 7959:1987 Woodworking machines – Double edging precision circular sawing machines – Nomenclature and acceptance conditions |
| 584 | ISO 7960:1995 Airborne noise emitted by machine tools – Operating conditions for woodworking machines |
| 585 | ISO 7967 Reciprocating internal combustion engines – Vocabulary of components and systems |
| 586 | ISO 7967-1:2005 Part 1: Structure and external covers |
| 587 | ISO 7967-2:2010 Part 2: Main running gear |
| 588 | ISO 7967-3:2010 Part 3: Valves, camshaft drives and actuating mechanisms |
| 589 | ISO 7967-4:2005 Part 4: Pressure charging and air/exhaust gas ducting systems |
| 590 | ISO 7967-5:2010 Part 5: Cooling systems |
| 591 | ISO 7967-6:2005 Part 6: Lubricating systems |
| 592 | ISO 7967-7:2005 Part 7: Governing systems |
| 593 | ISO 7967-8:2005 Part 8: Starting systems |
| 594 | ISO 7967-9:2010 Part 9: Control and monitoring systems |
| 595 | ISO 7967-10:2014 Part 10: Ignition systems |
| 596 | ISO 7967-11:2014 Part 11: Fuel systems |
| 597 | ISO 7967-12:2014 Part 12: Exhaust emission control systems |
| 598 | ISO 7983:1988 Woodworking machines – Single blade circular sawing machines with travelling table – Nomenclature and acceptance conditions |
| 599 | ISO 7987:1985 Woodworking machines – Turning lathes – Nomenclature and acceptance conditions |
| 600 | ISO 7988:1988 Woodworking machines – Double-end tenoning machines – Nomenclature and acceptance conditions |
| 601 | ISO 7998:2005 Ophthalmic optics – Spectacle frames – Lists of equivalent terms and vocabulary |
