| # | Standards |
| 1 | ISO/TR 16015:2003 Geometrical product specifications (GPS) – Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
| 2 | ISO 16016:2016 Technical product documentation – Protection notices for restricting the use of documents and products |
| 3 | ISO 16020:2005 Steel for the reinforcement and prestressing of concrete – Vocabulary |
| 4 | ISO/IEC 16022:2006 Information technology – Automatic identification and data capture techniques – Data Matrix bar code symbology specification |
| 5 | ISO/IEC 16023:2000 Information technology – International symbology specification – MaxiCode |
| 6 | ISO 16032:2004 Acoustics – Measurement of sound pressure level from service equipment in buildings – Engineering method |
| 7 | ISO 16034:2002 Ophthalmic optics – Specifications for single-vision ready-to-wear near- vision spectacles |
| 8 | ISO 16039:2004 Road construction and maintenance equipment – Slipform pavers – Definitions and commercial specifications |
| 9 | ISO 16054:2000 Implants for surgery – Minimum data sets for surgical implants |
| 10 | ISO/TR 16056 Health informatics – Interoperability of telehealth systems and networks |
| 11 | ISO/TR 16056-1:2004 Part 1: Introduction and definitions |
| 12 | ISO/TR 16056-2:2004 Part 2: Real-time systems |
| 13 | ISO/TS 16058:2004 Health informatics – Interoperability of telelearning systems |
| 14 | ISO 16059:2007 Dentistry – Required elements for codification used in data exchange |
| 15 | ISO 16061:2015 Instrumentation for use in association with non-active surgical implants – General requirements |
| 16 | ISO 16063 Methods for the calibration of vibration and shock transducers |
| 17 | ISO 16063-1:1998 Part 1: Basic concepts |
| 18 | ISO 16063-11:1999 Part 11: Primary vibration calibration by laser interferometry |
| 19 | ISO 16063-12:2002 Part 12: Primary vibration calibration by the reciprocity method |
| 20 | ISO 16063-13:2001 Part 13: Primary shock calibration using laser interferometry |
| 21 | ISO 16063-15:2006 Part 15: Primary angular vibration calibration by laser interferometry |
| 22 | ISO 16063-16:2014 Part 16: Calibration by Earth’s gravitation |
| 23 | ISO 16063-17:2016 Part 17: Primary calibration by centrifuge |
| 24 | ISO 16063-21:2003 Part 21: Vibration calibration by comparison to a reference transducer |
| 25 | ISO 16063-22:2005 Part 22: Shock calibration by comparison to a reference transducer |
| 26 | ISO 16063-31:2009 Part 31: Testing of transverse vibration sensitivity |
| 27 | ISO 16063-32:2016 Part 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitation |
| 28 | ISO 16063-33:2017 Part 33: Testing of magnetic field sensitivity |
| 29 | ISO 16063-41:2011 Part 41: Calibration of laser vibrometers |
| 30 | ISO 16063-42:2014 Part 42: Calibration of seismometers with high accuracy using acceleration of gravity |
| 31 | ISO 16063-43:2015 Part 43: Calibration of accelerometers by model-based parameter identification |
| 32 | ISO 16063-45:2017 Part 45: In-situ calibration of transducers with built in calibration coil |
| 33 | ISO 16069:2004 Graphical symbols – Safety signs – Safety way guidance systems (SWGS) |
| 34 | ISO/IEC 16085:2006 Systems and software engineering – Life cycle processes – Risk management |
| 35 | ISO 16087:2013 Implants for surgery – Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants |
| 36 | ISO 16103:2005 Packaging – Transport packaging for dangerous goods – Recycled plastics material |
| 37 | ISO 16106:2006 Packaging – Transport packages for dangerous goods – Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings—Guidelines for the application of ISO 9001 |
| 38 | ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines |
| 39 | ISO 16140 Microbiology of the food chain – Method validation |
| 40 | ISO 16140-1:2016 Part 1: Vocabulary |
| 41 | ISO 16140-2:2016 Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method |
| 42 | ISO 16142 Medical devices – Recognized essential principles of safety and performance of medical devices |
| 43 | ISO 16142-1:2016 Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
| 44 | ISO 16142-2:2017 Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| 45 | ISO/TR 16153:2004 Piston-operated volumetric instruments – Determination of uncertainty for volume measurements made using the photometric method |
| 46 | ISO 16155:2006 Ships and marine technology – Computer applications – Shipboard loading instruments |
| 47 | ISO 16165:2013 Ships and marine technology – Marine environment protection – Terminology relating to oil spill response |
| 48 | ISO/IEC TR 16166:2010 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Security of session-based communications |
| 49 | ISO/IEC TR 16167:2011 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Emergency calls |
| 50 | ISO 16175 Information and documentation – Principles and functional requirements for records in electronic office environments |
| 51 | ISO 16175-1:2010 Part 1: Overview and statement of principles |
| 52 | ISO 16175-2:2011 Part 2: Guidelines and functional requirements for digital records management systems |
| 53 | ISO 16175-3:2010 Part 3: Guidelines and functional requirements for records in business systems |
| 54 | ISO 16192:2017 Space systems – Experience gained in space projects (lessons learned) – Principles and guidelines |
| 55 | ISO/TS 16195:2013 Nanotechnologies – Guidance for developing representative test materials consisting of nano-objects in dry powder form |
| 56 | ISO/TR 16196:2016 Nanotechnologies – Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials |
| 57 | ISO/TR 16197:2014 Nanotechnologies – Compilation and description of toxicological screening methods for manufactured nanomaterials |
| 58 | ISO 16212:2017 Cosmetics – Microbiology – Enumeration of yeast and mould |
| 59 | ISO/TR 16218:2013 Packaging and the environment – Processes for chemical recovery |
| 60 | ISO 16232 Road vehicles – Cleanliness of components of fluid circuits |
| 61 | ISO 16232-1:2007 Part 1: Vocabulary |
| 62 | ISO 16232-2:2007 Part 2: Method of extraction of contaminants by agitation |
| 63 | ISO 16232-3:2007 Part 3: Method of extraction of contaminants by pressure rinsing |
| 64 | ISO 16232-4:2007 Part 4: Method of extraction of contaminants by ultrasonic techniques |
| 65 | ISO 16232-5:2007 Part 5: Method of extraction of contaminants on functional test bench |
| 66 | ISO 16232-6:2007 Part 6: Particle mass determination by gravimetric analysis |
| 67 | ISO 16232-7:2007 Part 7: Particle sizing and counting by microscopic analysis |
| 68 | ISO 16232-8:2007 Part 8: Particle nature determination by microscopic analysis |
| 69 | ISO 16232-9:2007 Part 10: Particle sizing and counting by automatic light extinction particle counter |
| 70 | ISO 16232-10:2007 Part 10: Expression of results |
| 71 | ISO 16239:2013 Metric series wires for measuring screw threads |
| 72 | ISO 16245:2009 Information and documentation – Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
| 73 | ISO 16249:2013 Springs – Symbols |
| 74 | ISO 16254:2016 Acoustics – Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation – Engineering method |
| 75 | ISO/IEC 16262:2011 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification |
| 76 | ISO 16269 Statistical interpretation of data |
| 77 | ISO 16269-4:2010 Part 4: Detection and treatment of outliers |
| 78 | ISO 16269-6:2014 Part 6: Determination of statistical tolerance intervals |
| 79 | ISO 16269-7:2001 Part 7: Median – Estimation and confidence intervals |
| 80 | ISO 16269-8:2004 Part 8: Determination of prediction intervals |
| 81 | ISO/TS 16277 Health informatics – Categorial structures of clinical findings in traditional medicine |
| 82 | ISO/TS 16277-1:2015 Part 1: Traditional Chinese, Japanese and Korean medicine |
| 83 | ISO 16278:2016 Health informatics – Categorial structure for terminological systems of human anatomy |
| 84 | ISO 16284:2006 Ophthalmic optics – Information interchange for ophthalmic optical equipment |
| 85 | ISO/TR 16310:2014 Symbol libraries for construction and facilities management |
| 86 | ISO/IEC 16317:2011 Information technology – Telecommunications and information exchange between systems – proxZzzy for sleeping hosts |
| 87 | ISO/IEC/IEEE 16326:2009 Systems and software engineering – Life cycle processes – Project management |
| 88 | ISO 16331 Optics and optical instruments – Laboratory procedures for testing surveying and construction instruments |
| 89 | ISO 16331-1:2017 Part 1: Performance of handheld laser distance meters |
| 90 | ISO 16336:2014 Applications of statistical and related methods to new technology and product development process – Robust parameter design (RPD) |
| 91 | ISO/IEC 16350:2015 Information technology – Systems and software engineering – Application management |
| 92 | ISO/IEC 16353:2011 Information technology – Telecommunications and information exchange between systems – Front-end configuration command for NFC-WI (NFC-FEC) |
| 93 | ISO 16355 Applications of statistical and related methods to new technology and product development process |
| 94 | ISO 16355-1:2015 Part 1: General principles and perspectives of Quality Function Deployment (QFD) |
| 95 | ISO 16355-2:2017 Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder |
| 96 | ISO 16355-4:2017 Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder |
| 97 | ISO 16355-5:2017 Part 5: Solution strategy |
| 98 | ISO/TR 16355-8:2017 Part 8: Guidelines for commercialization and life cycle |
| 99 | ISO/TR 16379:2014 Tissue-engineered medical products – Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging |
| 100 | ISO/IEC 16382:2000 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges – DLT 6 format |
| 101 | ISO/IEC 16388:2007 Information technology – Automatic identification and data capture techniques – Code 39 bar code symbology specification |
| 102 | ISO/IEC 16390:2007 Information technology – Automatic identification and data capture techniques – Interleaved 2 of 5 bar code symbology specification |
| 103 | ISO/TS 16401 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-2 |
| 104 | ISO/TS 16401-1:2012 Part 1: Test suite structure and test purposes |
| 105 | ISO/TS 16401-2:2012 Part 2: Abstract test suite |
| 106 | ISO 16402:2008 Implants for surgery – Acrylic resin cement – Flexural fatigue testing of acrylic resin cements used in orthopaedics |
| 107 | ISO/TS 16407 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-1 |
| 108 | ISO/TS 16407-1:2011 Part 1: Test suite structure and test purposes |
| 109 | ISO/TS 16407-2:2012 Part 2: Abstract test suite |
| 110 | ISO/TS 16410 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-3 |
| 111 | ISO/TS 16410-1:2011 Part 1: Test suite structure and test purposes |
| 112 | ISO/TS 16410-2:2012 Part 2: Abstract test suite |
| 113 | ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry – Instrumental requirements, alignment and positioning, data collection, data analysis and reporting |
| 114 | ISO 16428:2005 Implants for surgery – Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices |
| 115 | ISO 16429:2004 Implants for surgery – Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods |
| 116 | ISO 16437:2012 Ships and marine technology – Lifesaving and fire protection – Atmospheric oil mist detectors for ships |
| 117 | ISO 16439:2014 Information and documentation – Methods and procedures for assessing the impact of libraries |
| 118 | ISO 16443:2014 Dentistry – Vocabulary for dental implants systems and related procedure |
| 119 | ISO/IEC 16448:2002 Information technology – 120 mm DVD – Read-only disk |
| 120 | ISO/IEC 16449:2002 Information technology – 80 mm DVD – Read-only disk |
| 121 | ISO 16457:2014 Space systems – Space environment (natural and artificial) – The Earth’s ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere |
| 122 | ISO/TS 16460:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – Communication protocol messages for global usage |
| 123 | ISO/IEC 16480:2015 Information technology – Automatic identification and data capture techniques – Reading and display of ORM by mobile devices |
| 124 | ISO 16484 Building automation and control systems (BACS) |
| 125 | ISO 16484-1:2010 Part 1: Project specification and implementation |
| 126 | ISO 16484-2:2004 Part 2: Hardware |
| 127 | ISO 16484-3:2005 Part 3: Functions |
| 128 | ISO 16484-5:2017 Part 5: Data communication protocol |
| 129 | ISO 16484-6:2014 Part 6: Data communication conformance testing |
| 130 | ISO/IEC 16485:2000 Information technology – Mixed Raster Content (MRC) |
| 131 | ISO 16495:2013 Packaging – Transport packaging for dangerous goods – Test methods |
| 132 | ISO/IEC 16500 Information technology – Generic digital audio-visual systems |
| 133 | ISO/IEC 16500-1:1999 Part 1: System reference models and scenarios |
| 134 | ISO/IEC 16500-2:1999 Part 2: System dynamics, scenarios and protocol requirements |
| 135 | ISO/IEC 16500-3:1999 Part 3: Contours: Technology domain |
| 136 | ISO/IEC 16500-4:1999 Part 4: Lower-layer protocols and physical interfaces |
| 137 | ISO/IEC 16500-5:1999 Part 5: High and mid-layer protocols |
| 138 | ISO/IEC 16500-6:1999 Part 6: Information representation |
| 139 | ISO/IEC 16500-7:1999 Part 7: Basic security tools |
| 140 | ISO/IEC 16500-8:1999 Part 8: Management architecture and protocols |
| 141 | ISO/IEC 16500-9:1999 Part 9: Usage information protocols |
| 142 | ISO/IEC TR 16501:1999 Information technology – Generic digital audio-visual systems – Technical Report on ISO/IEC 16500 – Description of digital audio-visual functionalities |
| 143 | ISO/IEC 16504:2011 Information technology – Telecommunications and information exchange between systems – MAC and PHY for operation in TV white space |
| 144 | ISO/IEC 16509:1999 Information technology – Year 2000 terminology |
| 145 | ISO/IEC 16512 Information technology – Relayed multicast protocol |
| 146 | ISO/IEC 16512-1:2016 Information technology – Relayed Multicast Control Protocol (RMCP) – Framework |
| 147 | ISO/IEC 16512-2:2016 Information technology – Relayed multicast protocol: Specification for simplex group applications |
| 148 | ISO/IEC 16513:2005 Information technology – Group management protocol |
| 149 | ISO/HL7 16527:2016 Health informatics – HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM) |
| 150 | ISO 16548:2012 Ships and marine technology – Ship design – General guidance on emergency towing procedures |
| 151 | ISO 16549 Textiles – Unevenness of textile strands – Capacitance method |
| 152 | ISO/TS 16550:2014 Nanotechnologies – Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus |
| 153 | ISO 16559:2014 Solid biofuels – Terminology, definitions and descriptions |
| 154 | ISO 16571:2014 Systems for evacuation of plume generated by medical devices |
| 155 | ISO 16587:2004 Mechanical vibration and shock – Performance parameters for condition monitoring of structures |
| 156 | ISO 16589 Rotary shaft lip-type seals incorporating thermoplastic sealing elements |
| 157 | ISO 16589-2:2011 Part 2: Vocabulary |
| 158 | ISO 16609:2012 Financial services – Requirements for message authentication using symmetric techniques |
| 159 | ISO 16610 Geometrical product specifications (GPS) – Filtration |
| 160 | ISO 16612 Graphic technology – Variable printing data exchange |
| 161 | ISO 16612-1:2005 Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005) |
| 162 | ISO 16612-2:2010 Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2) |
| 163 | ISO 16613 Graphic technology – Variable content replacement |
| 164 | ISO 16613-1:2017 Part 1: Using PDF/X for variable content replacement (PDF/VCR-1) |
| 165 | ISO 16622:2002 Meteorology – Sonic anemometers/thermometers – Acceptance test methods for mean wind measurements |
| 166 | ISO 16628:2008 Tracheobronchial tubes – Sizing and marking |
| 167 | ISO 16638 Radiological protection – Monitoring and internal dosimetry for specific materials |
| 168 | ISO 16638-1:2015 Part 1: Inhalation of uranium compounds |
| 169 | ISO 16641:2014 Measurement of radioactivity in the environment – Air – Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors |
| 170 | ISO 16642:2017 Computer applications in terminology — Terminological markup framework |
| 171 | ISO 16649 Microbiology of the food chain – Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli[Note 3] |
| 172 | ISO 16649-1:2001 Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-D-glucuronide |
| 173 | ISO 16649-2:2001 Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-indolyl beta-D-glucuronide |
| 174 | ISO 16649-3:2015 Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide |
| 175 | ISO 16654:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Escherichia coli O157 |
| 176 | ISO 16671:2015 Ophthalmic implants – Irrigating solutions for ophthalmic surgery |
| 177 | ISO 16672:2015 Ophthalmic implants – Ocular endotamponades |
| 178 | ISO 16682:2015 Aerospace series – Terminology for clamping devices |
| 179 | ISO 16684 Graphic technology – Extensible metadata platform (XMP) specification |
| 180 | ISO 16684-1:2012 Part 1: Data model, serialization and core properties |
| 181 | ISO 16684-2:2014 Part 2: Description of XMP schemas using RELAX NG |
| 182 | ISO/TR 16705:2016 Statistical methods for implementation of Six Sigma – Selected illustrations of contingency table analysis |
| 183 | ISO 16706:2016 Ships and marine technology – Marine evacuation systems – Load calculations and testing |
| 184 | ISO 16707:2016 Ships and marine technology – Marine evacuation systems – Determination of capacity |
| 185 | ISO 16739:2013 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries[1] |
| 186 | ISO 16739-1:2018 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries — Part 1: Data schema[2] |
| 187 | ISO 16744:2003 Dentistry — Base metal materials for fixed dental restorations [Withdrawn: replaced with ISO 22674] |
| 188 | ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment |
| 189 | ISO 16760:2014 Graphic technology – Prepress data exchange – Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows |
| 190 | ISO/TR 16764:2003 Lifts, escalators and passenger conveyors – Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility |
| 191 | ISO/TS 16785:2014 Electronic Fee Collection (EFC) – Interface definition between DSRC-OBE and external in-vehicle devices |
| 192 | ISO/TR 16786:2015 Intelligent transport systems – The use of simulation models for evaluation of traffic management systems – Input parameters and reporting template for simulation of traffic signal control systems |
| 193 | ISO 16787:2016 Intelligent transport systems – Assisted Parking System (APS) – Performance requirements and test procedures |
| 194 | ISO/TS 16791:2014 Health informatics – Requirements for international machine-readable coding of medicinal product package identifiers |
| 195 | ISO 16792:2015 Technical product documentation – Digital product definition data practices |
| 196 | ISO 16818:2008 Building environment design – Energy efficiency – Terminology |
| 197 | ISO/IEC 16824:1999 Information technology – 120 mm DVD rewritable disk (DVD-RAM) |
| 198 | ISO/IEC 16825:1999 Information technology – Case for 120 mm DVD-RAM disks |
| 199 | ISO 16832:2006 Acoustics – Loudness scaling by means of categories |
| 200 | ISO 16840 Wheelchair seating |
| 201 | ISO 16840-1:2006 Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces |
| 202 | ISO/TS 16843 Health informatics – Categorial structures for representation of acupuncture |
| 203 | ISO/TS 16843-1:2016 Part 1: Acupuncture points |
| 204 | ISO/TS 16843-2:2015 Part 2: Needling |
| 205 | ISO 16894:2009 Wood-based panels – Oriented strand board (OSB) – Definitions, classification and specifications |
| 206 | ISO 16902 Hydraulic fluid power – Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method |
| 207 | ISO 16902-1:2003 Part 1: Pumps |
| 208 | ISO 16919:2014 Space data and information transfer systems – Requirements for bodies providing audit and certification of candidate trustworthy digital repositories |
| 209 | ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations [Withdrawn: replaced by IATF 16949:2016] |
| 210 | ISO/TS 16951:2004 Road vehicles – Ergonomic aspects of transport information and control systems (TICS) – Procedures for determining priority of on-board messages presented to drivers |
| 211 | ISO/TS 16955:2016 Prosthetics – Quantification of physical parameters of ankle foot devices and foot units |
| 212 | ISO/IEC 16963:2017 Information technology – Digitally recorded media for information interchange and storage – Test method for the estimation of lifetime of optical disks for long-term data storage |
| 213 | ISO/IEC 16969:1999 Information technology – Data interchange on 120 mm optical disk cartridges using +RW format – Capacity: 3,0 Gbytes and 6,0 Gbytes |
| 214 | ISO 16971:2015 Ophthalmic instruments – Optical coherence tomograph for the posterior segment of the human eye |
| 215 | ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design |
| 216 | ISO/IEC 17000:2004 Conformity assessment – Vocabulary and general principles |
| 217 | ISO/IEC 17007:2009 Conformity assessment – Guidance for drafting normative documents suitable for use for conformity assessment |
| 218 | ISO/IEC 17011:2017 Conformity assessment – Requirements for accreditation bodies accrediting conformity assessment bodies |
| 219 | ISO/IEC 17020:2012 Conformity assessment—Requirements for the operation of various types of bodies performing inspection |
| 220 | ISO/IEC 17021:2011 Conformity assessment—Requirements for bodies providing audit and certification of management systems |
| 221 | ISO/IEC 17021-1:2015 Part 1: Requirements |
| 222 | ISO/IEC 17021-2:2016 Part 2: Competence requirements for auditing and certification of environmental management systems |
| 223 | ISO/IEC 17021-3:2017 Part 3: Competence requirements for auditing and certification of quality management systems |
| 224 | ISO/IEC TS 17021-4:2013 Part 4: Competence requirements for auditing and certification of event sustainability management systems |
| 225 | ISO/IEC TS 17021-5:2014 Part 5: Competence requirements for auditing and certification of asset management systems |
| 226 | ISO/IEC TS 17021-6:2014 Part 6: Competence requirements for auditing and certification of business continuity management systems |
| 227 | ISO/IEC TS 17021-7:2014 Part 7: Competence requirements for auditing and certification of road traffic safety management systems |
| 228 | ISO/IEC TS 17021-9:2016 Part 9: Competence requirements for auditing and certification of anti-bribery management systems |
| 229 | ISO/IEC TS 17022:2012 Conformity assessment—Requirements and recommendations for content of a third-party audit report on management systems |
| 230 | ISO/IEC TS 17023:2013 Conformity assessment—Guidelines for determining the duration of management system certification audits |
| 231 | ISO/IEC 17024:2012 Conformity assessment – General requirements for bodies operating certification of persons |
| 232 | ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories |
| 233 | ISO/IEC TR 17026:2015 Conformity assessment – Example of a certification scheme for tangible products |
| 234 | ISO/IEC TS 17027:2014 Conformity assessment – Vocabulary related to competence of persons used for certification of persons |
| 235 | ISO/IEC TR 17028:2017 Conformity assessment – Guidelines and examples of a certification scheme for services |
| 236 | ISO/IEC 17029:2019 Conformity assessment — General principles and requirements for validation and verification bodies |
| 237 | ISO/IEC 17030:2003 Conformity assessment – General requirements for third-party marks of conformity |
| 238 | ISO/IEC 17033:2019 Ethical claims and supporting information – Principles and requirements |
| 239 | ISO 17034:2016 General requirements for the competence of reference material producers |
| 240 | ISO/IEC 17040:2005 Conformity assessment – General requirements for peer assessment of conformity assessment bodies and accreditation bodies |
| 241 | ISO/IEC 17043:2010 Conformity assessment – General requirements for proficiency testing |
| 242 | ISO 17049:2013 Accessible design – Application of braille on signage, equipment and appliances |
| 243 | ISO/IEC 17050:2004 Conformity assessment — Supplier’s declaration of conformity |
| 244 | ISO/IEC 17050-1:2004 Part 1: General requirements (reviewed and confirmed in 2020) [3] |
| 245 | ISO/IEC 17050-2:2004 Part 2: Supporting documentation (reviewed and confirmed in 2020) [4] |
| 246 | ISO/IEC 17065:2012 Conformity assessment—Requirements for bodies certifying products, processes and services |
| 247 | ISO 17066:2007 Hydraulic tools – Vocabulary |
| 248 | ISO/IEC 17067:2013 Conformity assessment – Fundamentals of product certification and guidelines for product certification schemes |
| 249 | ISO/TR 17068:2012 Information and documentation – Trusted third party repository for digital records |
| 250 | ISO 17075 Leather – Chemical determination of chromium(VI) content in leather |
| 251 | ISO 17075-1:2017 Part 1: Colorimetric method |
| 252 | ISO 17075-2:2017 Part 2: Chromatographic method |
| 253 | ISO 17080:2005 Manually portable agricultural and forestry machines and powered lawn and garden equipment – Design principles for single-panel product safety labels |
| 254 | ISO 17088:2012 Specifications for compostable plastics |
| 255 | ISO 17089 Measurement of fluid flow in closed conduits – Ultrasonic meters for gas |
| 256 | ISO 17089-1:2010 Part 1: Meters for custody transfer and allocation measurement |
| 257 | ISO 17089-2:2012 Part 2: Meters for industrial applications |
| 258 | ISO 17090 Health informatics – Public key infrastructure |
| 259 | ISO 17090-1:2013 Part 1: Overview of digital certificate services |
| 260 | ISO 17090-2:2015 Part 2: Certificate profile |
| 261 | ISO 17090-3:2008 Part 3: Policy management of certification authority |
| 262 | ISO 17090-4:2014 Part 4: Digital Signatures for healthcare documents |
| 263 | ISO 17090-5:2017 Part 5: Authentication using Healthcare PKI credentials |
| 264 | ISO/TR 17098:2013 Packaging material recycling – Report on substances and materials which may impede recycling |
| 265 | ISO 17100:2015 Translation services—Requirements for translation services |
| 266 | ISO 17115:2007 Health informatics – Vocabulary of compositional terminological systems |
| 267 | ISO/TS 17117:2002 Health informatics – Controlled health terminology – Structure and high-level indicators |
| 268 | ISO 17117 Health informatics — Terminological resources |
| 269 | ISO 17117-1:2018 Part 1: Characteristics |
| 270 | ISO/TR 17119:2005 Health informatics – Health informatics profiling framework |
| 271 | ISO 17123 Optics and optical instruments – Field procedures for testing geodetic and surveying instruments |
| 272 | ISO 17123-1:2014 Part 1: Theory |
| 273 | ISO 17123-2:2001 Part 2: Levels |
| 274 | ISO 17123-3:2001 Part 3: Theodolites |
| 275 | ISO 17123-4:2012 Part 4: Electro-optical distance meters (EDM measurements to reflectors) |
| 276 | ISO 17123-5:2012 Part 5: Total stations |
| 277 | ISO 17123-6:2012 Part 6: Rotating lasers |
| 278 | ISO 17123-7:2005 Part 7: Optical plumbing instruments |
| 279 | ISO 17123-8:2015 Part 8: GNSS field measurement systems in real-time kinematic (RTK) |
| 280 | ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems – Cardiovascular absorbable implants |
| 281 | ISO 17166:1999 Erythema reference action spectrum and standard erythema dose |
| 282 | ISO 17185 Intelligent transport systems – Public transport user information |
| 283 | ISO 17185-1:2014 Part 1: Standards framework for public information systems |
| 284 | ISO/TR 17185-2:2015 Part 2: Public transport data and interface standards catalogue and cross references |
| 285 | ISO/TR 17185-3:2015 Part 3: Use cases for journey planning systems and their interoperation |
| 286 | ISO/TS 17187:2013 Intelligent transport systems – Electronic information exchange to facilitate the movement of freight and its intermodal transfer – Governance rules to sustain electronic information exchange methods |
| 287 | ISO/TS 17200:2013 Nanotechnology – Nanoparticles in powder form – Characteristics and measurements |
| 288 | ISO 17201 Acoustics – Noise from shooting ranges |
| 289 | ISO 17201-1:2005 Part 1: Determination of muzzle blast by measurement |
| 290 | ISO 17201-2:2006 Part 2: Estimation of muzzle blast and projectile sound by calculation |
| 291 | ISO 17201-3:2010 Part 3: Guidelines for sound propagation calculations |
| 292 | ISO 17201-4:2006 Part 4: Prediction of projectile sound |
| 293 | ISO 17201-5:2010 Part 5: Noise management |
| 294 | ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method |
| 295 | ISO/IEC 17203:2017 Information technology – Open Virtualization Format (OVF) specification |
| 296 | ISO 17208 Underwater acoustics – Quantities and procedures for description and measurement of underwater sound from ships |
| 297 | ISO 17208-1:2016 Part 1: Requirements for precision measurements in deep water used for comparison purposes |
| 298 | ISO 17218:2014 Sterile acupuncture needles for single use |
| 299 | ISO/TS 17251:2016 Health informatics – Business requirements for a syntax to exchange structured dose information for medicinal products |
| 300 | ISO 17258:2015 Statistical methods – Six Sigma – Basic criteria underlying benchmarking for Six Sigma in organisations |
| 301 | ISO 17261:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Intermodal goods transport architecture and terminology |
| 302 | ISO 17262:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Numbering and data structures |
| 303 | ISO 17263:2012 Intelligent transport systems – Automatic vehicle and equipment identification – System parameters |
| 304 | ISO 17264:2009 Intelligent transport systems – Automatic vehicle and equipment identification – Interfaces |
| 305 | ISO 17267:2009 Intelligent transport systems – Navigation systems – Application programming interface (API) |
| 306 | ISO/TR 17302:2015 Nanotechnologies – Framework for identifying vocabulary development for nanotechnology applications in human healthcare |
| 307 | ISO/IEC 17309:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of a circuit mode basic service and the supplementary service user-to-user signalling as a pair of on-demand inter-PINX connections |
| 308 | ISO/IEC 17310:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing |
| 309 | ISO/IEC 17311:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 8 kbit/s sub-multiplexing |
| 310 | ISO 17316:2015 Information and documentation – International standard link identifier (ISLI) |
| 311 | ISO 17338:2009 Ships and marine technology – Drawings for fire protection – Indications of fire rating by divisions for ships and high-speed craft |
| 312 | ISO/IEC 17341:2009 Information technology – Data interchange on 120 mm and 80 mm optical disk using +RW format – Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X) |
| 313 | ISO/IEC 17342:2004 Information technology – 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW) |
| 314 | ISO/IEC 17343:2007 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and SIP – Basic services |
| 315 | ISO/IEC 17344:2009 Information technology – Data interchange on 120 mm and 80 mm optical disk using +R format – Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X) |
| 316 | ISO/IEC 17345:2006 Information technology – Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges – Capacity: 30 Gbytes per Cartridge – First Generation |
| 317 | ISO/IEC 17346:2005 Information technology – Data interchange on 90 mm optical disk cartridges – Capacity: 1,3 Gbytes per cartridge |
| 318 | ISO/TR 17350:2013 Direct Marking on Plastic Returnable Transport Items (RTIs) |
| 319 | ISO 17351:2013 Packaging – Braille on packaging for medicinal products |
| 320 | ISO 17359:2011 Condition monitoring and diagnostics of machines – General guidelines |
| 321 | ISO 17361:2017 Intelligent transport systems – Lane departure warning systems – Performance requirements and test procedures |
| 322 | ISO 17363:2013 Supply chain applications of RFID – Freight containers |
| 323 | ISO 17364:2013 Supply chain applications of RFID – Returnable transport items (RTIs) and returnable packaging items (RPIs) |
| 324 | ISO 17365:2013 Supply chain applications of RFID – Transport units |
| 325 | ISO 17366:2013 Supply chain applications of RFID – Product packaging |
| 326 | ISO 17367:2013 Supply chain applications of RFID – Product tagging |
| 327 | ISO 17369:2013 Statistical data and metadata exchange (SDMX) |
| 328 | ISO/TR 17370:2013 Application Guideline on Data Carriers for Supply Chain Management |
| 329 | ISO/TR 17384:2008 Intelligent transport systems – Interactive centrally determined route guidance (CDRG) – Air interface message set, contents and format |
| 330 | ISO 17387:2008 Intelligent transport systems – Lane change decision aid systems (LCDAS) – Performance requirements and test procedures |
| 331 | ISO 17398:2004 Safety colours and safety signs – Classification, performance and durability of safety signs |
| 332 | ISO 17410:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of psychrotrophic microorganisms |
| 333 | ISO/IEC 17417:2011 Information technology – Telecommunications and information exchange between systems – Short Distance Visible Light Communication (SDVLC) |
| 334 | ISO/TS 17419:2014 Intelligent transport systems – Cooperative systems – Classification and management of ITS applications in a global context |
| 335 | ISO/TS 17423:2014 Intelligent transport systems – Cooperative systems – ITS application requirements and objectives for selection of communication profiles |
| 336 | ISO/TR 17424:2015 Intelligent transport systems – Cooperative systems – State of the art of Local Dynamic Maps concepts |
| 337 | ISO/TS 17425:2016 Intelligent transport systems – Cooperative systems – Data exchange specification for in-vehicle presentation of external road and traffic related data |
| 338 | ISO/TS 17426:2016 Intelligent transport systems – Cooperative systems – Contextual speeds |
| 339 | ISO 17427 Intelligent transport systems – Cooperative ITS[Note 3] |
| 340 | ISO/TS 17427:2014 Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems |
| 341 | ISO/TR 17427-2:2015 Part 2: Framework overview |
| 342 | ISO/TR 17427-3:2015 Part 3: Concept of operations (ConOps) for ‘core’ systems |
| 343 | ISO/TR 17427-4:2015 Part 4: Minimum system requirements and behaviour for core systems |
| 344 | ISO/TR 17427-6:2015 Part 6: ‘Core system’ risk assessment methodology |
| 345 | ISO/TR 17427-7:2015 Part 7: Privacy aspects |
| 346 | ISO/TR 17427-8:2015 Part 8: Liability aspects |
| 347 | ISO/TR 17427-9:2015 Part 9: Compliance and enforcement aspects |
| 348 | ISO/TR 17427-10:2015 Part 10: Driver distraction and information display |
| 349 | ISO/TS 17429:2017 Intelligent transport systems – Cooperative ITS – ITS station facilities for the transfer of information between ITS stations |
| 350 | ISO 17432:2004 Health informatics – Messages and communication – Web access to DICOM persistent objects |
| 351 | ISO 17438 Intelligent transport systems – Indoor navigation for personal and vehicle ITS station |
| 352 | ISO 17438-1:2016 Part 1: General information and use case definition |
| 353 | ISO/TS 17439:2014 Health informatics – Development of terms and definitions for health informatics glossaries |
| 354 | ISO 17442:2012 Financial services – Legal Entity Identifier (LEI) |
| 355 | ISO/TS 17444 Electronic fee collection – Charging performance |
| 356 | ISO/TS 17444-1:2017 Part 1: Metrics |
| 357 | ISO/TS 17444-2:2017 Part 2: Examination framework |
| 358 | ISO 17450 Geometrical product specifications (GPS) – Basic concepts[Note 3] |
| 359 | ISO 17450-1:2011 Part 1: Model for geometrical specification and verification |
| 360 | ISO 17450-2:2012 Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| 361 | ISO 17450-3:2016 Part 3: Toleranced features |
| 362 | ISO 17450-4:2017 Part 4: Geometrical characteristics for quantifying GPS deviations |
| 363 | ISO 17451 Packaging – Codification of contents for inventories for shipments of household goods and personal effects |
| 364 | ISO 17451-1:2016 Part 1: Numeric codification of inventories |
| 365 | ISO/TS 17451-2:2017 Part 2: XML messaging structure for electronic transmission of inventory data |
| 366 | ISO/TR 17452:2007 Intelligent transport systems – Using UML for defining and documenting ITS/TICS interfaces |
| 367 | ISO/IEC 17462:2000 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-4 format |
| 368 | ISO/TR 17465 Intelligent transport systems – Cooperative ITS |
| 369 | ISO/TR 17465-1:2014 Part 1: Terms and definitions |
| 370 | ISO/TR 17465-2:2015 Part 2: Guidelines for standards documents |
| 371 | ISO/TR 17465-3:2015 Part 3: Release procedures for standards documents |
| 372 | ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots |
| 373 | ISO 17468:2016 Microbiology of the food chain – Technical requirements and guidance on establishment or revision of a standardized reference method |
| 374 | ISO 17469 Document management – Strategy markup language (StratML) |
| 375 | ISO 17469-1:2015 Part 1: StratML core elements |
| 376 | ISO 17480:2015 Packaging – Accessible design – Ease of opening |
| 377 | ISO 17488:2016 Road vehicles – Transport information and control systems – Detection-response task (DRT) for assessing attentional effects of cognitive load in driving |
| 378 | ISO/TS 17503:2015 Statistical methods of uncertainty evaluation – Guidance on evaluation of uncertainty using two-factor crossed designs |
| 379 | ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data |
| 380 | ISO 17510:2015 Medical devices – Sleep apnoea breathing therapy – Masks and application accessories |
| 381 | ISO 17515 Intelligent transport systems – Communications access for land mobiles (CALM) – Evolved universal terrestrial radio access network (E-UTRAN) |
| 382 | ISO 17515-1:2015 Part 1: General usage |
| 383 | ISO 17516:2014 Cosmetics – Microbiology – Microbiological limits |
| 384 | ISO/TR 17522:2015 Health informatics – Provisions for health applications on mobile/smart devices |
| 385 | ISO 17523:2016 Health informatics – Requirements for electronic prescriptions |
| 386 | ISO 17526:2003 Optics and optical instruments – Lasers and laser-related equipment – Lifetime of lasers |
| 387 | ISO 17532:2007 Stationary equipment for agriculture – Data communications network for livestock farming |
| 388 | ISO 17534 Acoustics – Software for the calculation of sound outdoors |
| 389 | ISO 17534-1:2015 Part 1: Quality requirements and quality assurance |
| 390 | ISO/TR 17534-2:2014 Part 2: General recommendations for test cases and quality assurance interface |
| 391 | ISO/TR 17534-3:2015 Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1 |
| 392 | ISO/IEC 17549 Information technology – User interface guidelines on menu navigation |
| 393 | ISO/IEC 17549-2:2015 Part 2: Navigation with 4-direction devices |
| 394 | ISO/IEC 17568:2013 Information technology – Telecommunications and information exchange between systems – Close proximity electric induction wireless communications |
| 395 | ISO 17572 Intelligent transport systems (ITS) – Location referencing for geographic databases |
| 396 | ISO 17572-1:2015 Part 1: General requirements and conceptual model |
| 397 | ISO 17572-2:2015 Part 2: Pre-coded location references (pre-coded profile) |
| 398 | ISO 17572-3:2015 Part 3: Dynamic location references (dynamic profile) |
| 399 | ISO 17573:2010 Electronic fee collection – Systems architecture for vehicle-related tolling |
| 400 | ISO/TS 17574:2017 Electronic fee collection – Guidelines for security protection profiles |
| 401 | ISO 17575 Electronic fee collection – Application interface definition for autonomous systems |
| 402 | ISO 17575-1:2016 Part 1: Charging |
| 403 | ISO 17575-2:2016 Part 2: Communication and connection to the lower layers |
| 404 | ISO 17575-3:2016 Part 3: Context data |
| 405 | ISO/TS 17582:2014 Quality management systems – Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government |
| 406 | ISO/IEC 17592:2004 Information technology – 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM) |
| 407 | ISO/IEC 17594:2004 Information technology – Cases for 120 mm and 80 mm DVD-RAM disks |
| 408 | ISO 17599:2015 Technical product documentation (TPD) – General requirements of digital mock-up for mechanical products |
| 409 | ISO 17604:2015 Microbiology of the food chain – Carcass sampling for microbiological analysis |
| 410 | ISO 17631:2002 Ships and marine technology – Shipboard plans for fire protection, life-saving appliances and means of escape |
| 411 | ISO 17658:2002 Welding – Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts – Terminology |
| 412 | ISO 17659:2002 Welding – Multilingual terms for welded joints with illustrations |
| 413 | ISO 17677 Resistance welding – Vocabulary |
| 414 | ISO 17677-1:2009 Part 1: Spot, projection and seam welding |
| 415 | ISO 17679:2016 Tourism and related services – Wellness spa – Service requirements |
| 416 | ISO 17680:2015 Tourism and related services – Thalassotherapy – Service requirements |
| 417 | ISO 17687:2007 Transport Information and Control Systems (TICS) – General fleet management and commercial freight operations – Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation |
| 418 | ISO 17712:2103 Freight containers — Mechanical seals – updated the 2010 version: offers “a single source of information on mechanical seals which are acceptable for securing freight containers in international commerce”.[5] Supported by C-TPAT (the use of “H” class seals is required).[6] |
| 419 | ISO 17713 Meteorology – Wind measurements |
| 420 | ISO 17713-1:2007 Part 1: Wind tunnel test methods for rotating anemometer performance |
| 421 | ISO 17714:2007 Meteorology – Air temperature measurements – Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
| 422 | ISO 17717:2017 Meteorological balloons – Specification |
| 423 | ISO 17724:2003 Graphical symbols – Vocabulary |
| 424 | ISO/TS 17728:2015 Microbiology of the food chain – Sampling techniques for microbiological analysis of food and feed samples |
| 425 | ISO 17740 Building construction machinery and equipment – Concrete placing systems for stationary equipment |
| 426 | ISO 17740-1:2015 Part 1: Terminology and commercial specifications |
| 427 | ISO/IEC 17760 Information technology – AT Attachment[Note 3] |
| 428 | ISO/IEC 17760-101:2015 Part 101: ATA/ATAPI Command Set (ATA8-ACS) |
| 429 | ISO/IEC 17760-102:2016 Part 102: ATA/ATAPI Command set – 2 (ACS-2) |
| 430 | ISO 17772 Energy performance of buildings – Indoor environmental quality |
| 431 | ISO 17772-1:2017 Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| 432 | ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment |
| 433 | ISO/IEC 17788:2014 Information technology – Cloud computing – Overview and vocabulary |
| 434 | ISO/IEC 17789:2014 Information technology – Cloud computing – Reference architecture |
| 435 | ISO/TR 17791:2013 Health informatics – Guidance on standards for enabling safety in health software |
| 436 | ISO 17799 Information technology – Security techniques – Code of Practice for Information Security Management (superseded by ISO/IEC 27002) |
| 437 | ISO 17800 Building environment design – Facility Smart Grid Information Model |
| 438 | ISO/IEC 17811 Information technology – Device control and management |
| 439 | ISO/IEC 17811-1:2014 Part 1: Architecture |
| 440 | ISO/IEC 17811-2:2015 Part 2: Specification of Device Control and Management Protocol |
| 441 | ISO/IEC 17811-3:2014 Part 3: Specification of Reliable Message Delivery Protocol |
| 442 | ISO/IEC 17821:2015 Information technology – Specification of low power wireless mesh network over channel-hopped TDMA links |
| 443 | ISO/TS 17822 In vitro diagnostic test systems – Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens |
| 444 | ISO/TS 17822-1:2014 Part 1: General requirements, terms and definitions |
| 445 | ISO/IEC 17825:2016 Information technology – Security techniques – Testing methods for the mitigation of non-invasive attack classes against cryptographic modules |
| 446 | ISO/IEC 17826:2016 Information technology – Cloud Data Management Interface (CDMI) |
| 447 | ISO/IEC 17839 Information technology – Identification cards – Biometric System-on-Card[Note 3] |
| 448 | ISO/IEC 17839-1:2014 Part 1: Core requirements |
| 449 | ISO/IEC 17839-2:2015 Part 2: Physical characteristics |
| 450 | ISO/IEC 17839-3:2016 Part 3: Logical information interchange mechanism |
| 451 | ISO 17853:2011 Wear of implant materials – Polymer and metal wear particles – Isolation and characterization |
| 452 | ISO/TS 17863:2013 Geometrical product specification (GPS) – Tolerancing of moveable assemblies |
| 453 | ISO/TS 17865:2016 Geometrical product specifications (GPS) – Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems |
| 454 | ISO/IEC 17875:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Registration supplementary service |
| 455 | ISO/IEC 17876:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol—Private User Mobility (PUM) – Registration supplementary service |
| 456 | ISO/IEC 17877:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Call handling additional network features |
| 457 | ISO/IEC 17878:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Private User Mobility (PUM) – Call handling additional network features |
| 458 | ISO 17893:2004 Steel wire ropes – Vocabulary, designation and classification |
| 459 | ISO 17894:2005 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications |
| 460 | ISO 17901 Optics and photonics – Holography |
| 461 | ISO 17901-1:2015 Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms |
| 462 | ISO 17901-2:2015 Part 2: Methods for measurement of hologram recording characteristics |
| 463 | ISO 17907:2014 Ships and marine technology – Single point mooring arrangements for conventional tankers |
| 464 | ISO/IEC 17913:2000 Information technology – 12,7mm 128-track magnetic tape cartridge for information interchange – Parallel serpentine format |
| 465 | ISO/TS 17915:2013 Optics and photonics – Measurement method of semiconductor lasers for sensing |
| 466 | ISO/TS 17919:2013 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of botulinum type A, B, E and F neurotoxin-producing clostridia |
| 467 | ISO 17933:2000 GEDI – Generic Electronic Document Interchange |
| 468 | ISO/TS 17938:2014 Health informatics – Semantic network framework of traditional Chinese medicine language system |
| 469 | ISO 17937:2015 Dentistry – Osteotome |
| 470 | ISO/TS 17948:2014 Health informatics – Traditional Chinese medicine literature metadata |
| 471 | ISO/IEC 17960:2015 Information technology – Programming languages, their environments and system software interfaces – Code signing for source code |
| 472 | ISO/IEC TS 17961:2013 Information technology – Programming languages, their environments and system software interfaces – C secure coding rules |
| 473 | ISO/IEC 17963:2013 Web Services for Management (WS-Management) Specification |
| 474 | ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries – Guidelines on competency for personnel |
| 475 | ISO 17972 Graphic technology – Colour data exchange format (CxF/X)[Note 3] |
| 476 | ISO 17972-1:2015 Part 1: Relationship to CxF3 (CxF/X) |
| 477 | ISO 17972-2:2016 Part 2: Scanner target data (CxF/X-2) |
| 478 | ISO 17972-3:2017 Part 3: Output target data (CxF/X-3) |
| 479 | ISO 17972-4:2015 Part 4: Spot colour characterisation data (CxF/X-4) |
| 480 | ISO/TS 17975:2015 Health informatics – Principles and data requirements for consent in the Collection, Use or Disclosure of personal health information |
| 481 | ISO/IEC 17982:2012 Information technology – Telecommunications and information exchange between systems – Close Capacitive Coupling Communication Physical Layer (CCCC PHY) |
| 482 | ISO 17987 Road vehicles – Local Interconnect Network (LIN) |
| 483 | ISO 17987-2:2016 Part 2: Transport protocol and network layer services |
| 484 | ISO 17994:2014 Water Quality – Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods |
| 485 | ISO 17995:2005 Water quality – Detection and enumeration of thermotolerant Campylobacter species |
| 486 | ISO/IEC 17998:2012 Information Technology – SOA Governance Framework |
