| # | Standards |
| 1 | ISO 14000 Environmental management systems (This is a set of standards, rather than a single standard) |
| 2 | ISO 14001:2015 Environmental management systems – Requirements with guidance for use |
| 3 | ISO 14004:2016 Environmental management systems – General guidelines on implementation |
| 4 | ISO 14005:2010 Environmental management systems – Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation |
| 5 | ISO 14006:2011 Environmental management systems – Guidelines for incorporating ecodesign |
| 6 | ISO 14015:2022 Environmental management — Guidelines for environmental due diligence assessment |
| 7 | ISO 14020:2000 Environmental labels and declarations – General principles |
| 8 | ISO 14031 Environmental management – Environmental performance evaluation – Guidelines |
| 9 | ISO 14045:2012 describes the principles, requirements and guidelines for eco-efficiency assessment for product systems [3] |
| 10 | ISO 14046:2014 – Environmental management — Water footprint — Principles, requirements and guidelines |
| 11 | ISO 14050:2009 Environmental management – Vocabulary |
| 12 | ISO 14051 Environmental management – Material flow cost accounting – General framework |
| 13 | ISO 14064 Greenhouse gases |
| 14 | ISO/TR 14073:2017 Environmental management – Water footprint – Illustrative examples on how to apply ISO 14046 |
| 15 | ISO 14084 Process diagrams for power plants |
| 16 | ISO 14084-1:2015 Part 1: Specification for diagrams |
| 17 | ISO 14084-2:2015 Part 2: Graphical symbols |
| 18 | ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method |
| 19 | ISO/IEC 14102:2008 Information technology – Guideline for the evaluation and selection of CASE tools |
| 20 | ISO/TR 14105:2011 Document management – Change management for successful electronic document management system (EDMS) implementation |
| 21 | ISO 14117:2012 Active implantable medical devices – Electromagnetic compatibility – EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices |
| 22 | ISO 14132 Optics and photonics – Vocabulary for telescopic systems |
| 23 | ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132 |
| 24 | ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes |
| 25 | ISO 14132-3:2014 Part 3: Terms for telescopic sights |
| 26 | ISO 14132-4:2015 Part 4: Terms for astronomical telescopes |
| 27 | ISO 14132-5:2008 Part 5: Terms for night vision devices |
| 28 | ISO/IEC 14136:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Identification supplementary services |
| 29 | ISO 14139:2000 Hydrometric determinations – Flow measurements in open channels using structures – Compound gauging structures |
| 30 | ISO/IEC 14143 Information technology – Software measurement – Functional size measurement |
| 31 | ISO/IEC 14143-1:2007 Part 1: Definition of concepts |
| 32 | ISO/IEC 14143-2:2011 Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1 |
| 33 | ISO/IEC TR 14143-3:2003 Part 3: Verification of functional size measurement methods |
| 34 | ISO/IEC TR 14143-4:2002 Part 4: Reference model |
| 35 | ISO/IEC TR 14143-5:2004 Part 5: Determination of functional domains for use with functional size measurement |
| 36 | ISO/IEC 14143-6:2012 Part 6: Guide for use of ISO/IEC 14143 series and related International Standards |
| 37 | ISO 14145 Roller ball pens and refills |
| 38 | ISO 14145-2:1998 Part 2: Documentary use (DOC) |
| 39 | ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice |
| 40 | ISO 14163:1998 Acoustics – Guidelines for noise control by silencers |
| 41 | ISO 14164:1999 Stationary source emissions – Determination of the volume flowrate of gas streams in ducts – Automated method |
| 42 | ISO/IEC 14165 Information technology – Fibre Channel |
| 43 | ISO/IEC 14165-114:2005 Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S) |
| 44 | ISO/IEC 14165-115:2006 Part 115: Physical Interfaces (FC-PI) |
| 45 | ISO/IEC 14165-116:2005 Part 116: 10 Gigabit (10GFC) |
| 46 | ISO/IEC TR 14165-117:2007 Part 117: Methodologies for jitter and signal quality (MJSQ) |
| 47 | ISO/IEC 14165-122:2005 Part 122: Arbitrated Loop-2 (FC-AL-2) |
| 48 | ISO/IEC 14165-131:2000 Part 131: Switch Fabric Requirements (FC-SW) |
| 49 | ISO/IEC 14165-133:2010 Part 133: Switch Fabric-3 (FC-SW-3) |
| 50 | ISO/IEC 14165-141:2001 Part 141: Fabric Generic Requirements (FC-FG) |
| 51 | ISO/IEC 14165-211:1999 Part 211: Mapping to HIPPI-FP (FC-FP) |
| 52 | ISO/IEC 14165-222:2005 Part 222: Single-byte command code 2 mapping protocol (FC-SB-2) |
| 53 | ISO/IEC 14165-241:2005 Part 241: Backbone 2 (FC-BB-2) |
| 54 | ISO/IEC 14165-243:2012 Part 243: Backbone 3 (FC-BB-3) |
| 55 | ISO/IEC 14165-251:2008 Part 251: Framing and Signaling (FC-FS) |
| 56 | ISO/IEC TR 14165-312:2009 Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553) |
| 57 | ISO/IEC TR 14165-313:2013 Part 313: Avionics Environment—Anonymous Synchronous Messaging (FC-AE-ASM) |
| 58 | ISO/IEC TR 14165-314:2013 Part 314: Avionics Environment – Remote Direct Memory Access (FC-AE-RDMA) |
| 59 | ISO/IEC 14165-321:2009 Part 321: Audio-Video (FC-AV) |
| 60 | ISO/IEC 14165-331:2007 Part 331: Virtual Interface (FC-VI) |
| 61 | ISO/IEC TR 14165-372:2011 Part 372: Methodologies of interconnects-2 (FC-MI-2) |
| 62 | ISO/IEC 14165-414:2007 Part 414: Generic Services—4 (FC-GS-4) |
| 63 | ISO/IEC 14165-521:2009 Part 521: Fabric application interface standard (FAIS) |
| 64 | ISO/IEC 14169:1995 Information technology – 90 mm flexible disk cartridges – 21 MBytes formatted capacity – ISO Type 305 |
| 65 | ISO 14189:2013 Water quality – Enumeration of Clostridium perfringens – Method using membrane filtration |
| 66 | ISO 14199:2015 Health informatics – Information models – Biomedical Research Integrated Domain Group (BRIDG) Model |
| 67 | ISO 14223 Radiofrequency identification of animals – Advanced transponders |
| 68 | ISO 14224 Petroleum, petrochemical and natural gas industries – Collection and exchange of reliability and maintenance data for equipment |
| 69 | ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000 |
| 70 | ISO 14242 Implants for surgery – Wear of total hip-joint prostheses |
| 71 | ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test |
| 72 | ISO 14242-2:2016 Part 2: Methods of measurement |
| 73 | ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test |
| 74 | ISO 14243 Implants for surgery – Wear of total knee-joint prostheses |
| 75 | ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test |
| 76 | ISO 14243-2:2016 Part 2: Methods of measurement |
| 77 | ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test |
| 78 | ISO/IEC 14251:1995 Information technology – Data interchange on 12,7 mm 36-track magnetic tape cartridges |
| 79 | ISO/IEC TR 14252:1996 Information technology – Guide to the POSIX Open System Environment (OSE) [Withdrawn without replacement] |
| 80 | ISO 14253 Geometrical product specifications (GPS) – Inspection by measurement of workpieces and measuring equipment |
| 81 | ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications |
| 82 | ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| 83 | ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
| 84 | ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules |
| 85 | ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments |
| 86 | ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
| 87 | ISO/TS 14265:2011 Health Informatics – Classification of purposes for processing personal health information |
| 88 | ISO/TR 14283:2004 Implants for surgery – Fundamental principles |
| 89 | ISO 14289 Document management applications – Electronic document file format enhancement for accessibility |
| 90 | ISO 14289-1:2014 Part 1: Use of ISO 32000-1 (PDF/UA-1) |
| 91 | ISO/TR 14292:2012 Health informatics – Personal health records – Definition, scope and context |
| 92 | ISO 14296:2016 Intelligent transport systems – Extension of map database specifications for applications of cooperative ITS |
| 93 | ISO 14302:2002 Space systems – Electromagnetic compatibility requirements |
| 94 | ISO 14362 Textiles – Methods for determination of certain aromatic amines derived from azo colorants |
| 95 | ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres |
| 96 | ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
| 97 | ISO/IEC TR 14369:2018 Information technology – Programming languages, their environments and system software interfaces – Guidelines for the preparation of language-independent service specifications (LISS) |
| 98 | ISO 14405 Geometrical product specifications (GPS) – Dimensional tolerancing |
| 99 | ISO 14405-1:2016 Part 1: Linear sizes |
| 100 | ISO 14405-2:2011 Part 2: Dimensions other than linear sizes |
| 101 | ISO 14405-3:2016 Part 3: Angular sizes |
| 102 | ISO 14406:2010 Geometrical product specifications (GPS) – Extraction |
| 103 | ISO 14408:2016 Tracheal tubes designed for laser surgery – Requirements for marking and accompanying information |
| 104 | ISO 14416:2003 Information and documentation – Requirements for binding of books, periodicals, serials and other paper documents for archive and library use – Methods and materials |
| 105 | ISO/IEC 14417:1999 Information technology – Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016 |
| 106 | ISO/TS 14441:2013 Health informatics – Security and privacy requirements of EHR systems for use in conformity assessment |
| 107 | ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards |
| 108 | ISO 14451 Pyrotechnic articles – Pyrotechnic articles for vehicles |
| 109 | ISO 14451-1:2013 Part 1: Terminology |
| 110 | ISO 14452:2012 Network services billing – Requirements |
| 111 | ISO 14461 Milk and milk products – Quality control in microbiological laboratories |
| 112 | ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts |
| 113 | ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps |
| 114 | ISO/IEC 14462:2010 Information technology – Open-edi reference model |
| 115 | ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis |
| 116 | ISO/IEC TR 14471:2007 Information technology – Software engineering – Guidelines for the adoption of CASE tools |
| 117 | ISO/IEC 14473:1999 Information technology – Office equipment – Minimum information to be specified for image scanners |
| 118 | ISO/IEC 14474:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Functional requirements for static circuit-mode inter-PINX connections |
| 119 | ISO/IEC TR 14475:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Architecture and scenarios for Private Integrated Services Networking |
| 120 | ISO/IEC 14476 Information technology – Enhanced communications transport protocol |
| 121 | ISO/IEC 14476-1:2002 Specification of simplex multicast transport |
| 122 | ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport |
| 123 | ISO/IEC 14476-3:2008 Specification of duplex multicast transport |
| 124 | ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport |
| 125 | ISO/IEC 14476-5:2008 Specification of N-plex multicast transport |
| 126 | ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport |
| 127 | ISO/IEC 14478 Information technology – Computer graphics and image processing – Presentation Environment for Multimedia Objects (PREMO) |
| 128 | ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO |
| 129 | ISO/IEC 14478-2:1998 Part 2: Foundation Component |
| 130 | ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services |
| 131 | ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component |
| 132 | ISO/IEC 14492:2001 Information technology – Lossy/lossless coding of bi-level images |
| 133 | ISO/IEC 14495 Information technology – Lossless and near-lossless compression of continuous-tone still images |
| 134 | ISO/IEC 14495-1:1999 Baseline |
| 135 | ISO/IEC 14495-2:2003 Extensions |
| 136 | ISO/IEC 14496 Information technology – Coding of audio-visual objects |
| 137 | ISO 14500:2003 Textile machinery and accessories – Harnesses for Jacquard weaving machines – Vocabulary |
| 138 | ISO 14509 Small craft – Airborne sound emitted by powered recreational craft |
| 139 | ISO 14509-1:2008 Part 1: Pass-by measurement procedures |
| 140 | ISO 14509-3:2009 Part 3: Sound assessment using calculation and measurement procedures |
| 141 | ISO 14511:2001 Measurement of fluid flow in closed conduits – Thermal mass flowmeters |
| 142 | ISO/IEC 14515 Information technology – Portable Operating System Interface (POSIX®) – Test methods for measuring conformance to POSIX |
| 143 | ISO/IEC 14515-1:2000 Part 1: System interfaces |
| 144 | ISO/IEC TR 14516:2002 Information technology – Security techniques – Guidelines for the use and management of Trusted Third Party services |
| 145 | ISO/IEC 14517:1996 Information technology – 130 mm optical disk cartridges for information interchange – Capacity: 2,6 Gbytes per cartridge |
| 146 | ISO/IEC 14519:2001 Information technology – POSIX Ada Language Interfaces – Binding for System Application Program Interface (API) |
| 147 | ISO 14532:2014 Natural gas – Vocabulary |
| 148 | ISO 14533 Processes, data elements and documents in commerce, industry and administration – Long term signature profiles |
| 149 | ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) |
| 150 | ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES) |
| 151 | ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES) |
| 152 | ISO 14534:2011 Ophthalmic optics – Contact lenses and contact lens care products – Fundamental requirements |
| 153 | ISO 14539:2000 Manipulating industrial robots – Object handling with grasp-type grippers – Vocabulary and presentation of characteristics |
| 154 | ISO/IEC 14543 Information technology – Home Electronic System (HES) architecture |
| 155 | ISO/IEC 14543-2-1:2006 Part 2-1: Introduction and device modularity |
| 156 | ISO/IEC 14543-3-1:2006 Part 3-1: Communication layers – Application layer for network based control of HES Class 1 |
| 157 | ISO/IEC 14543-3-2:2006 Part 3-2: Communication layers – Transport, network and general parts of data link layer for network based control of HES Class 1 |
| 158 | ISO/IEC 14543-3-3:2007 Part 3-3: User process for network based control of HES Class 1 |
| 159 | ISO/IEC 14543-3-4:2007 Part 3-4: System management – Management procedures for network based control of HES Class 1 |
| 160 | ISO/IEC 14543-3-5:2007 Part 3-5: Media and media dependent layers – Power line for network based control of HES Class 1 |
| 161 | ISO/IEC 14543-3-6:2007 Part 3-6: Media and media dependent layers – Network based on HES Class 1, twisted pair |
| 162 | ISO/IEC 14543-3-7:2007 Part 3-7: Media and media dependent layers – Radio frequency for network based control of HES Class 1 |
| 163 | ISO/IEC 14543-3-10:2012 Part 3-10: Wireless short-packet (WSP) protocol optimized for energy harvesting – Architecture and lower layer protocols |
| 164 | ISO/IEC 14543-3-11:2016 Part 3-11: Frequency modulated wireless short-packet (FMWSP) protocol optimised for energy harvesting – Architecture and lower layer protocols |
| 165 | ISO/IEC TR 14543-4:2002 Part 4: Home and building automation in a mixed-use building |
| 166 | ISO/IEC 14543-4-1:2008 Part 4-1: Communication layers – Application layer for network enhanced control devices of HES Class 1 |
| 167 | ISO/IEC 14543-4-2:2008 Part 4-2: Communication layers – Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1 |
| 168 | ISO/IEC 14543-4-3:2015 Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1 |
| 169 | ISO/IEC 14543-5-1:2010 Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 – Core protocol |
| 170 | ISO/IEC 14543-5-3:2012 Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Basic application |
| 171 | ISO/IEC 14543-5-4:2010 Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device validation |
| 172 | ISO/IEC 14543-5-5:2012 Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device type |
| 173 | ISO/IEC 14543-5-6:2012 Part 5-6: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Service type |
| 174 | ISO/IEC 14543-5-7:2015 Part 5-7: Intelligent grouping and 3 resource sharing – Remote access system architecture |
| 175 | ISO/IEC 14543-5-8:2017 Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Remote access core protocol |
| 176 | ISO/IEC 14543-5-9:2017 Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 – Remote access service platform |
| 177 | ISO/IEC 14543-5-21:2012 Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – AV profile |
| 178 | ISO/IEC 14543-5-22:2010 Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – File profile |
| 179 | ISO 14560:2004 Acceptance sampling procedures by attributes – Specified quality levels in nonconforming items per million |
| 180 | ISO/TR 14564:1995 Shipbuilding and marine structures – Marking of escape routes |
| 181 | ISO/IEC 14568:1997 Information technology – DXL: Diagram eXchange Language for tree-structured charts |
| 182 | ISO/IEC 14575:2000 Information technology – Microprocessor systems – Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction) |
| 183 | ISO/IEC 14576:1999 Information technology – Synchronous Split Transfer Type System Bus (STbus) – Logical Layer |
| 184 | ISO 14580:2011 Hexalobular socket cheese head screws |
| 185 | ISO 14588:2000 Blind rivets – Terminology and definitions |
| 186 | ISO/IEC 14598 Software engineering – Product evaluation[Note 3] |
| 187 | ISO/IEC 14598-5:1998 Part 5: Process for evaluators |
| 188 | ISO/IEC 14598-6:2001 Part 6: Documentation of evaluation modules |
| 189 | ISO 14602:2010 Non-active surgical implants – Implants for osteosynthesis – Particular requirements |
| 190 | ISO 14607:2007 Non-active surgical implants – Mammary implants – Particular requirements |
| 191 | ISO 14617 Graphical symbols for diagrams |
| 192 | ISO 14617-1:2005 Part 1: General information and indexes |
| 193 | ISO 14617-2:2002 Part 2: Symbols having general application |
| 194 | ISO 14617-3:2002 Part 3: Connections and related devices |
| 195 | ISO 14617-3:2002 Part 3: Connections and related devices |
| 196 | ISO 14617-4:2002 Part 4: Actuators and related devices |
| 197 | ISO 14617-5:2002 Part 5: Measurement and control devices |
| 198 | ISO 14617-6:2002 Part 6: Measurement and control functions |
| 199 | ISO 14617-7:2002 Part 7: Basic mechanical components |
| 200 | ISO 14617-8:2002 Part 8: Valves and dampers |
| 201 | ISO 14617-9:2002 Part 9: Pumps, compressors and fans |
| 202 | ISO 14617-10:2002 Part 10: Fluid power converters |
| 203 | ISO 14617-11:2002 Part 11: Devices for heat transfer and heat engines |
| 204 | ISO 14617-12:2002 Part 12: Devices for separating, purification and mixing |
| 205 | ISO 14617-13:2004 Part 13: Devices for material processing |
| 206 | ISO 14617-14:2004 Part 14: Devices for transport and handling of material |
| 207 | ISO 14617-15:2002 Part 15: Installation diagrams and network maps |
| 208 | ISO 14630:2012 Non-active surgical implants – General requirements |
| 209 | ISO 14638:2015 Geometrical product specifications (GPS) – Matrix model |
| 210 | ISO/TR 14639 Health informatics – Capacity-based eHealth architecture roadmap |
| 211 | ISO/TR 14639-1:2012 Part 1: Overview of national eHealth initiatives |
| 212 | ISO/TR 14639-2:2014 Part 2: Architectural components and maturity model |
| 213 | ISO 14641 Electronic archiving |
| 214 | ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation |
| 215 | ISO 14644 Cleanrooms and associated controlled environments |
| 216 | ISO/IEC 14651:2020 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering |
| 217 | ISO/IEC 14662:2010 Information technology – Open-edi reference model |
| 218 | ISO/TR 14685:2001 Hydrometric determinations – Geophysical logging of boreholes for hydrogeological purposes – Considerations and guidelines for making measurements |
| 219 | ISO 14686:2003 Hydrometric determinations – Pumping tests for water wells – Considerations and guidelines for design, performance and use |
| 220 | ISO 14695:2003 Industrial fans – Method of measurement of fan vibration |
| 221 | ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control |
| 222 | ISO 14698-1:2003 General principles and methods |
| 223 | ISO 14698-2:2003 Evaluation and interpretation of biocontamination data |
| 224 | ISO/IEC 14699:1997 Information technology – Open Systems Interconnection – Transport Fast Byte Protocol |
| 225 | ISO/IEC 14700:1997 Information technology – Open Systems Interconnection – Network Fast Byte Protocol |
| 226 | ISO 14708 Implants for surgery – Active implantable medical devices |
| 227 | ISO 14708-1:2014 Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
| 228 | ISO 14708-2:2012 Part 2: Cardiac pacemakers |
| 229 | ISO 14708-3:2017 Part 3: Implantable neurostimulators |
| 230 | ISO 14708-4:2008 Part 4: Implantable infusion pumps |
| 231 | ISO 14708-5:2010 Part 5: Circulatory support devices |
| 232 | ISO 14708-6:2010 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) |
| 233 | ISO 14708-7:2013 Part 7: Particular requirements for cochlear implant systems |
| 234 | ISO/IEC 14709 Information technology – Configuration of Customer Premises Cabling (CPC) for applications |
| 235 | ISO/IEC 14709-1:1997 Part 1: Integrated Services Digital Network (ISDN) basic access |
| 236 | ISO/IEC 14709-2:1998 Part 2: Integrated Services Digital Network (ISDN) primary rate |
| 237 | ISO 14722:1998 Moped and moped-rider kinematics – Vocabulary |
| 238 | ISO 14726:2008 Ships and marine technology – Identification colours for the content of piping systems |
| 239 | ISO 14729:2001 Ophthalmic optics – Contact lens care products – Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses |
| 240 | ISO 14730:2014 Ophthalmic optics – Contact lens care products – Antimicrobial preservative efficacy testing and guidance on determining discard date |
| 241 | ISO 14739 Document management – 3D use of Product Representation Compact (PRC) format |
| 242 | ISO 14739-1:2014 Part 1: PRC 10001 |
| 243 | ISO/TR 14742:2010 Financial services – Recommendations on cryptographic algorithms and their use |
| 244 | ISO/IEC 14750:1999 Information technology – Open Distributed Processing – Interface Definition Language |
| 245 | ISO/IEC 14752:2000 Information technology – Open Distributed Processing – Protocol support for computational interactions |
| 246 | ISO/IEC 14753:1999 Information technology – Open Distributed Processing – Interface references and binding |
| 247 | ISO/IEC 14754:1999 Information technology – Pen-Based Interfaces – Common gestures for Text Editing with Pen-Based Systems |
| 248 | ISO/IEC 14755:1997 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device |
| 249 | ISO/IEC 14756:1999 Information technology – Measurement and rating of performance of computer-based software systems |
| 250 | ISO/IEC 14760:1997 Information technology – Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change – Capacity: 1,3 Gbytes per cartridge |
| 251 | ISO/IEC 14762:2009 Information technology – Functional safety requirements for Home and Building Electronic Systems (HBES) |
| 252 | ISO/IEC 14763 Information technology – Implementation and operation of customer premises cabling |
| 253 | ISO/IEC 14763-1:1999 Part 1: Administration |
| 254 | ISO/IEC 14763-2:2012 Part 2: Planning and installation |
| 255 | ISO/IEC TR 14763-2-1:2011 Part 2-1: Planning and installation – Identifiers within administration systems |
| 256 | ISO/IEC 14763-3:2014 Part 3: Testing of optical fibre cabling |
| 257 | ISO/IEC 14764:2006 Software Engineering – Software Life Cycle Processes – Maintenance |
| 258 | ISO/IEC 14765:1997 Information technology – Framework for protocol identification and encapsulation |
| 259 | ISO/IEC 14766:1997 Information technology – Telecommunications and information exchange between systems – Use of OSI applications over the Internet Transmission Control Protocol (TCP) |
| 260 | ISO/IEC 14769:2001 Information technology – Open Distributed Processing – Type Repository Function |
| 261 | ISO/IEC 14771:1999 Information technology – Open Distributed Processing – Naming framework |
| 262 | ISO/IEC 14772 Information technology – Computer graphics and image processing – The Virtual Reality Modeling Language (VRML)[Note 3] |
| 263 | ISO/IEC 14772-1:1997 Part 1: Functional specification and UTF-8 encoding |
| 264 | ISO/IEC 14772-2:2004 Part 2: External authoring interface (EAI) |
| 265 | ISO/IEC 14776 Information technology – Small Computer System Interface (SCSI)[Note 3] |
| 266 | ISO/IEC 14776-112:2002 Part 112: Parallel Interface-2 (SPI-2) |
| 267 | ISO/IEC 14776-113:2002 Part 113: Parallel Interface-3 (SPI-3) |
| 268 | ISO/IEC 14776-115:2004 Part 115: Parallel Interface-5 (SPI-5) |
| 269 | ISO/IEC 14776-121:2010 Part 121: Passive Interconnect Performance (PIP) |
| 270 | ISO/IEC 14776-150:2004 Part 150: Serial Attached SCSI (SAS) |
| 271 | ISO/IEC 14776-151:2010 Part 151: Serial Attached SCSI – 1.1 (SAS-1.1) |
| 272 | ISO/IEC 14776-153:2015 Part 153: Serial Attached SCSI – 2.1 (SAS-2.1) |
| 273 | ISO/IEC 14776-154:2017 Part 154: Serial Attached SCSI – 3 (SAS-3) |
| 274 | ISO/IEC 14776-222:2005 Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP-2) |
| 275 | ISO/IEC 14776-223:2008 Part 223: Fibre Channel Protocol for SCSI, Third Version (FCP-3) |
| 276 | ISO/IEC 14776-232:2001 Part 232: Serial Bus Protocol 2 (SBP-2) |
| 277 | ISO/IEC 14776-251:2014 Part 251: USB attached SCSI (UAS) |
| 278 | ISO/IEC 14776-261:2012 Part 261: SAS Protocol Layer (SPL) |
| 279 | ISO/IEC 14776-262:2017 Part 262: SAS protocol layer – 2 (SPL-2) |
| 280 | ISO/IEC 14776-321:2002 Part 321: SCSI-3 Block Commands (SBC) |
| 281 | ISO/IEC 14776-322:2007 Part 322: SCSI Block Commands – 2 (SBC-2) |
| 282 | ISO/IEC 14776-323:2017 Part 323: SCSI Block commands – 3 (SBC-3) |
| 283 | ISO/IEC 14776-326:2015 Part 326: Reduced block commands (RBC) |
| 284 | ISO/IEC 14776-331:2002 Part 331: Stream Commands (SSC) |
| 285 | ISO/IEC 14776-333:2013 Part 333: SCSI Stream Commands – 3 (SSC-3) |
| 286 | ISO/IEC 14776-341:2000 Part 341: Controller Commands (SCC) |
| 287 | ISO/IEC 14776-342:2000 Part 342: Controller Commands – 2 (SCC-2) |
| 288 | ISO/IEC 14776-351:2007 Part 351: Medium Changer Commands (SCSI-3 SMC) |
| 289 | ISO/IEC 14776-362:2006 Part 362: Multimedia commands-2 (MMC-2) |
| 290 | ISO/IEC 14776-372:2011 Part 372: SCSI Enclosure Services – 2 (SES-2) |
| 291 | ISO/IEC 14776-381:2000 Part 381: Optical Memory Card Device Commands (OMC) |
| 292 | ISO/IEC 14776-411:1999 Part 411: SCSI-3 Architecture Model (SCSI-3 SAM) |
| 293 | ISO/IEC 14776-412:2006 Part 412: Architecture Model -2 (SAM-2) |
| 294 | ISO/IEC 14776-413:2007 Part 413: SCSI Architecture Model -3 (SAM-3) |
| 295 | ISO/IEC 14776-414:2009 Part 414: SCSI Architecture Model-4 (SAM-4) |
| 296 | ISO/IEC 14776-452:2005 Part 452: SCSI Primary Commands – 2 (SPC-2) |
| 297 | ISO/IEC 14776-453:2009 Part 453: Primary commands-3 (SPC-3) |
| 298 | ISO 14785:2014 Tourist information offices – Tourist information and reception services – Requirements |
| 299 | ISO/TR 14786:2014 Nanotechnologies – Considerations for the development of chemical nomenclature for selected nano-objects |
| 300 | ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants |
| 301 | ISO/TR 14806:2013 Intelligent transport systems – Public transport requirements for the use of payment applications for fare media |
| 302 | ISO 14813 Intelligent transport systems – Reference model architecture(s) for the ITS sector |
| 303 | ISO 14813-1:2015 Part 1: ITS service domains, service groups and services |
| 304 | ISO 14813-5:2010 Part 5: Requirements for architecture description in ITS standards |
| 305 | ISO 14813-6:2009 Part 6: Data presentation in ASN.1 |
| 306 | ISO 14814:2006 Road transport and traffic telematics – Automatic vehicle and equipment identification – Reference architecture and terminology |
| 307 | ISO 14815:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – System specifications |
| 308 | ISO 14816:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – Numbering and data structure |
| 309 | ISO 14817 Intelligent transport systems – ITS central data dictionaries |
| 310 | ISO 14817-1:2015 Part 1: Requirements for ITS data definitions |
| 311 | ISO 14817-2:2015 Part 2: Governance of the Central ITS Data Concept Registry |
| 312 | ISO 14817-3:2017 Part 3: Object identifier assignments for ITS data concepts |
| 313 | ISO 14819 Intelligent transport systems – Traffic and travel information messages via traffic message coding |
| 314 | ISO 14819-1:2013 Part 1: Coding protocol for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C |
| 315 | ISO 14819-2:2013 Part 2: Event and information codes for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C |
| 316 | ISO 14819-3:2013 Part 3: Location referencing for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C |
| 317 | ISO 14819-6:2006 Part 6: Encryption and conditional access for the Radio Data System – Traffic Message Channel ALERT C coding |
| 318 | ISO 14823:2017 Intelligent transport systems – Graphic data dictionary |
| 319 | ISO 14825:2011 Intelligent transport systems – Geographic Data Files (GDF) – GDF5.0 |
| 320 | ISO 14827 Transport information and control systems – Data interfaces between centres for transport information and control systems |
| 321 | ISO 14827-1:2005 Part 1: Message definition requirements |
| 322 | ISO 14827-2:2005 Part 2: DATEX-ASN |
| 323 | ISO/IEC 14833:1996 Information technology – Data interchange on 12,7 mm 128-Track magnetic tape cartridges – DLT 3 format |
| 324 | ISO/IEC 14834:1996 Information technology – Distributed Transaction Processing – The XA Specification |
| 325 | ISO 14837 Mechanical vibration – Ground-borne noise and vibration arising from rail systems |
| 326 | ISO 14837-1:2005 Part 1: General guidance |
| 327 | ISO/TS 14837-31:2017 Part 31: Guideline on field measurements for the evaluation of human exposure in buildings |
| 328 | ISO/TS 14837-32:2015 Part 32: Measurement of dynamic properties of the ground |
| 329 | ISO 14839 Mechanical vibration – Vibration of rotating machinery equipped with active magnetic bearings |
| 330 | ISO 14839-1:2002 Part 1: Vocabulary |
| 331 | ISO 14839-2:2004 Part 2: Evaluation of vibration |
| 332 | ISO 14839-3:2006 Part 3: Evaluation of stability margin |
| 333 | ISO 14839-4:2012 Part 4: Technical guidelines |
| 334 | ISO/IEC 14840:1996 Information technology – 12,65 mm wide magnetic tape cartridge for information interchange – Helical scan recording – Data-D3-1 format |
| 335 | ISO/IEC 14841:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call offer supplementary service |
| 336 | ISO/IEC 14842:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Do not disturb and do not disturb override supplementary services |
| 337 | ISO/IEC 14843:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Offer supplementary service |
| 338 | ISO/IEC 14844:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Do Not Disturb and Do Not Disturb Override supplementary services |
| 339 | ISO/IEC 14845:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call intrusion supplementary service |
| 340 | ISO/IEC 14846:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Intrusion supplementary service |
| 341 | ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide |
| 342 | ISO 14855-1:2012 General method |
| 343 | ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test |
| 344 | ISO/IEC 14863:1996 Information technology – System-Independent Data Format (SIDF) |
| 345 | ISO/TR 14873:2013 Information and documentation – Statistics and quality issues for web archiving |
| 346 | ISO 14879 Implants for surgery – Total knee-joint prostheses |
| 347 | ISO 14879-1:2000 Part 1: Determination of endurance properties of knee tibial trays |
| 348 | ISO 14880 Optics and photonics – Microlens arrays |
| 349 | ISO 14880-1:2016 Part 1: Vocabulary and general properties |
| 350 | ISO 14880-2:2006 Part 2: Test methods for wavefront aberrations |
| 351 | ISO 14880-3:2006 Part 3: Test methods for optical properties other than wavefront aberrations |
| 352 | ISO 14880-4:2006 Part 4: Test methods for geometrical properties |
| 353 | ISO/TR 14880-5:2010 Part 5: Guidance on testing |
| 354 | ISO 14881:2001 Integrated optics – Interfaces – Parameters relevant to coupling properties |
| 355 | ISO/IEC 14882:2020 Programming languages — C++ |
| 356 | ISO/IEC 14888 Information technology – Security techniques – Digital signatures with appendix |
| 357 | ISO/IEC 14888-1:2008 Part 1: General |
| 358 | ISO/IEC 14888-2:2008 Part 2: Integer factorization based mechanisms |
| 359 | ISO/IEC 14888-3:2016 Part 3: Discrete logarithm based mechanisms |
| 360 | ISO 14889:2013 Ophthalmic optics – Spectacle lenses – Fundamental requirements for uncut finished lenses |
| 361 | ISO/TS 14904:2002 Road transport and traffic telematics – Electronic fee collection (EFC) – Interface specification for clearing between operators |
| 362 | ISO 14906:2011 Electronic fee collection – Application interface definition for dedicated short-range communication |
| 363 | ISO/TS 14907 Electronic fee collection – Test procedures for user and fixed equipment |
| 364 | ISO/TS 14907-1:2015 Part 1: Description of test procedures |
| 365 | ISO/TS 14907-2:2016 Part 2: Conformance test for the on-board unit application interface |
| 366 | ISO/IEC 14908 Information technology – Control network protocol |
| 367 | ISO/IEC 14908-1:2012 Part 1: Protocol stack |
| 368 | ISO/IEC 14908-2:2012 Part 2: Twisted pair communication |
| 369 | ISO/IEC 14908-3:2012 Part 3: Power line channel specification |
| 370 | ISO/IEC 14908-4:2012 Part 4: IP communication |
| 371 | ISO 14915 Software ergonomics for multimedia user interfaces |
| 372 | ISO 14915-1:2002 Part 1: Design principles and framework |
| 373 | ISO 14915-2:2003 Part 2: Multimedia navigation and control |
| 374 | ISO 14915-3:2002 Part 3: Media selection and combination |
| 375 | ISO 14917:2017 Thermal spraying – Terminology, classification |
| 376 | ISO 14949:2001 Implants for surgery – Two-part addition-cure silicone elastomers |
| 377 | ISO 14963:2003 Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts |
| 378 | ISO 14971:2007 Medical devices – Application of risk management to medical devices |
| 379 | ISO 14972:1998 Sterile obturators for single use with over-needle peripheral intravascular catheters |
| 380 | ISO 14975:2000 Surface chemical analysis – Information formats |
| 381 | ISO 14976:1998 Surface chemical analysis – Data transfer format |
| 382 | ISO/IEC 14977:1996 Information technology – Syntactic metalanguage – Extended BNF |
| 383 | ISO 14978:2006 Geometrical product specifications (GPS) – General concepts and requirements for GPS measuring equipment |
| 384 | ISO 14982:1998 Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria |
| 385 | ISO/TS 15000 Electronic business eXtensible Markup Language ebXML |
| 386 | ISO 15000-5:2014 Part 5: Core Components Specification (CCS) |
| 387 | ISO 15001:2010 Anaesthetic and respiratory equipment – Compatibility with oxygen |
| 388 | ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| 389 | ISO 15004 Ophthalmic instruments – Fundamental requirements and test methods |
| 390 | ISO 15004-1:2006 Part 1: General requirements applicable to all ophthalmic instruments |
| 391 | ISO 15004-2:2007 Part 2: Light hazard protection |
| 392 | ISO 15006:2011 Road vehicles – Ergonomic aspects of transport information and control systems – Specifications for in-vehicle auditory presentation |
| 393 | ISO 15010:1998 Disposable hanging devices for transfusion and infusion bottles – Requirements and test methods |
| 394 | ISO 15016:2015 Ships and marine technology – Guidelines for the assessment of speed and power performance by analysis of speed trial data |
| 395 | ISO/IEC 15018:2004 Information technology – Generic cabling for homes |
| 396 | ISO 15022 Securities – Scheme for messages (Data Field Dictionary) |
| 397 | ISO/IEC 15026 Systems and software engineering—Systems and software assurance |
| 398 | ISO/IEC 15026-1:2013 Part 1: Concepts and vocabulary |
| 399 | ISO/IEC 15026-2:2011 Part 2: Assurance case |
| 400 | ISO/IEC 15026-3:2015 Part 3: System integrity levels |
| 401 | ISO/IEC 15026-4:2012 Part 4: Assurance in the life cycle |
| 402 | ISO 15031 Road vehicles – Communication between vehicle and external equipment for emissions-related diagnostics |
| 403 | ISO 15031-2:2010 Part 2: Guidance on terms, definitions, abbreviations and acronyms |
| 404 | ISO 15032:2000 Prostheses – Structural testing of hip units |
| 405 | ISO/IEC 15041:1997 Information technology – Data interchange on 90 mm optical disk cartridges – Capacity: 640 Mbytes per cartridge |
| 406 | ISO/IEC TR 15044:2000 Information technology – Terminology for the Home Electronic System (HES) |
| 407 | ISO/IEC 15045 Information technology – Home Electronic System (HES) gateway |
| 408 | ISO/IEC 15045-1:2004 Part 1: A residential gateway model for HES |
| 409 | ISO/IEC 15045-2:2012 Part 2: Modularity and protocol |
| 410 | ISO/IEC 15049:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Advice of charge supplementary services |
| 411 | ISO/IEC 15050:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Advice Of Charge supplementary services |
| 412 | ISO/IEC 15051:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Recall supplementary service |
| 413 | ISO/IEC 15052:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Recall supplementary service |
| 414 | ISO/IEC 15053:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Interception additional network feature |
| 415 | ISO/IEC 15054:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Interception additional network feature |
| 416 | ISO/IEC 15055:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Transit counter additional network feature |
| 417 | ISO/IEC 15056:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature |
| 418 | ISO/IEC 15067 Information technology – Home Electronic System (HES) application model[Note 4] |
| 419 | ISO/IEC TR 15067-2:1997 Part 2: Lighting model for HES |
| 420 | ISO/IEC 15067-3:2012 Part 3: Model of a demand-response energy management system for HES |
| 421 | ISO/IEC TR 15067-3-2:2016 Part 3-2: GridWise interoperability context-setting framework |
| 422 | ISO/IEC TR 15067-4:2001 Part 4: Security System for HES |
| 423 | ISO 15075:2003 Transport information and control systems – In-vehicle navigation systems – Communications message set requirements |
| 424 | ISO 15081:2011 Agricultural equipment – Graphical symbols for pressurized irrigation systems |
| 425 | ISO 15082 Road vehicles – Tests for rigid plastic safety glazing materials |
| 426 | ISO 15086 Hydraulic fluid power – Determination of the fluid-borne noise characteristics of components and systems |
| 427 | ISO 15086-1:2001 Part 1: Introduction |
| 428 | ISO 15086-2:2000 Part 2: Measurement of the speed of sound in a fluid in a pipe |
| 429 | ISO 15086-3:2008 Part 3: Measurement of hydraulic impedance |
| 430 | ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations |
| 431 | ISO 15112 Natural gas – Energy determination |
| 432 | ISO 15118 Road vehicles – Vehicle to grid communication interface |
| 433 | ISO 15137:2005 Self-adhesive hanging devices for infusion bottles and injection vials – Requirements and test methods |
| 434 | ISO 15142 Implants for surgery – Metal intramedullary nailing systems |
| 435 | ISO 15142-1:2003 Part 1: Intramedullary nails |
| 436 | ISO 15142-2:2003 Part 2: Locking components |
| 437 | ISO 15142-3:2003 Part 3: Connection devices and reamer diameter measurements |
| 438 | ISO 15143 Earth-moving machinery and mobile road construction machinery – Worksite data exchange |
| 439 | ISO 15143-1:2010 Part 1: System architecture |
| 440 | ISO 15143-2:2010 Part 2: Data dictionary |
| 441 | ISO/TS 15143-3:2016 Part 3: Telematics data |
| 442 | ISO/IEC 15145:1997 Information technology – Programming languages – FORTH |
| 443 | ISO/IEC 15149:2011 Information technology – Telecommunications and information exchange between systems – Magnetic field area network (MFAN) |
| 444 | ISO/IEC 15149-1:2014 Part 1: Air interface |
| 445 | ISO/IEC 15149-2:2015 Part 2: In-band Control Protocol for Wireless Power Transfer |
| 446 | ISO/IEC 15149-3:2016 Part 3: Relay Protocol for Extended Range |
| 447 | ISO/IEC 15149-4:2016 Part 4: Security Protocol for Authentication |
| 448 | ISO 15174:2012 Milk and milk products – Microbial coagulants – Determination of total milk-clotting activity |
| 449 | ISO 15188:2001 Project management guidelines for terminology standardization |
| 450 | ISO 15189:2012 Medical laboratories – Particular requirements for quality and competence |
| 451 | ISO/IEC 15200:1996 Information technology – Adaptive Lossless Data Compression algorithm (ALDC) |
| 452 | ISO/IEC 15205:2000 SBus – Chip and module interconnect bus |
| 453 | ISO 15212 Oscillation-type density meters |
| 454 | ISO 15212-1:1998 Part 1: Laboratory instruments |
| 455 | ISO 15212-2:2002 Part 2: Process instruments for homogeneous liquids |
| 456 | ISO 15213:2003 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions |
| 457 | ISO 15214:1998 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of mesophilic lactic acid bacteria – Colony-count technique at 30 degrees C |
| 458 | ISO 15216 Microbiology of the food chain – Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR[Note 4] |
| 459 | ISO 15216-1:2017 Part 1: Method for quantification |
| 460 | ISO/TS 15216-2:2013 Part 2: Method for qualitative detection |
| 461 | ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied |
| 462 | ISO 15223-1:2016 Part 1: General requirements |
| 463 | ISO 15223-2:2010 Part 2: Symbol development, selection and validation |
| 464 | ISO 15225:2016 Medical devices – Quality management – Medical device nomenclature data structure |
| 465 | ISO 15226:1999 Technical product documentation – Life cycle model and allocation of documents |
| 466 | ISO 15230:2007 Mechanical vibration and shock – Coupling forces at the man–machine interface for hand-transmitted vibration |
| 467 | ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products – Collected information on the effect of levels of water-soluble salt contamination |
| 468 | ISO 15241:2012 Rolling bearings – Symbols for physical quantities |
| 469 | ISO 15253:2000 Ophthalmic optics and instruments – Optical devices for enhancing low vision |
| 470 | ISO 15254:2009 Ophthalmic optics and instruments – Electro-optical devices for enhancing low vision |
| 471 | ISO 15261:2004 Vibration and shock generating systems – Vocabulary |
| 472 | ISO/IEC TR 15285:1998 Information technology – An operational model for characters and glyphs |
| 473 | ISO/IEC 15286:1999 Information technology – 130 mm optical disk cartridges for information interchange – Capacity: 5,2 Gbytes per cartridge |
| 474 | ISO/IEC/IEEE 15288:2015 Systems and software engineering – System life cycle processes |
| 475 | ISO/IEC/IEEE 15289:2017 Systems and software engineering – Content of life-cycle information items (documentation) |
| 476 | ISO/IEC 15291:1999 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS) |
| 477 | ISO/IEC TR 15294:2000 Information technology – Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces |
| 478 | ISO 15296:2004 Gas welding equipment – Vocabulary – Terms used for gas welding equipment |
| 479 | ISO/TR 15300:2001 Dentistry – Application of OSI clinical codification to the classification and coding of dental products |
| 480 | ISO/IEC 15307:1997 Information technology – Data interchange on 12,7 mm 128-track magnetic tape cartridges – DLT 4 format |
| 481 | ISO 15309:2013 Implants for surgery – Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices |
| 482 | ISO/PAS 15339 Graphic technology – Printing from digital data across multiple technologies |
| 483 | ISO/PAS 15339-1:2015 Part 1: Principles |
| 484 | ISO/PAS 15339-2:2015 Part 2: Characterized reference printing conditions, CRPC1-CRPC7 |
| 485 | ISO 15367 Lasers and laser-related equipment – Test methods for determination of the shape of a laser beam wavefront |
| 486 | ISO 15367-1:2003 Part 1: Terminology and fundamental aspects |
| 487 | ISO 15367-2:2005 Part 2: Shack-Hartmann sensors |
| 488 | ISO 15368:2001 Optics and optical instruments – Measurement of reflectance of plane surfaces and transmittance of plane parallel elements |
| 489 | ISO 15374:1998 Implants for surgery – Requirements for production of forgings |
| 490 | ISO 15375:2010 Medical infusion bottles – Suspension devices for multiple use – Requirements and test methods |
| 491 | ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices – Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 |
| 492 | ISO 15378:2017 Primary packaging materials for medicinal products – Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| 493 | ISO 15394:2009 Packaging – Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| 494 | ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles |
| 495 | ISO 15403-1:2006 Part 1: Designation of the quality |
| 496 | ISO/TR 15403-2:2006 Part 2: Specification of the quality |
| 497 | ISO/IEC 15404:2000 Information technology – Office machines – Minimum information to be included in specification sheets – Facsimile equipment |
| 498 | ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security |
| 499 | ISO/IEC 15408-1:2009 Part 1: Introduction and general model |
| 500 | ISO/IEC 15408-2:2008 Part 2: Security functional components |
| 501 | ISO/IEC 15408-3:2008 Part 3: Security assurance components |
| 502 | ISO/IEC TR 15410:1998 Information technology – Telecommunications and information exchange between systems – PISN mobility-general principles and services aspects |
| 503 | ISO/IEC 15411:1999 Information technology – Segmented keyboard layouts |
| 504 | ISO/IEC 15412:1999 Information technology – Portable computer keyboard layouts |
| 505 | ISO/IEC TR 15413:2001 Information technology – Font services – Abstract service definition |
| 506 | ISO/IEC 15414:2015 Information technology – Open data processing – Reference Model – Enterprise Language |
| 507 | ISO/IEC 15415:2011 Information technology – Automatic identification and data capture techniques – Bar code symbol print quality test specification – Two-dimensional symbols |
| 508 | ISO/IEC 15416:2016 Automatic identification and data capture techniques – Bar code print quality test specification – Linear symbols |
| 509 | ISO/IEC 15417:2007 Information technology – Automatic identification and data capture techniques – Code 128 bar code symbology specification |
| 510 | ISO/IEC 15418:2016 Information technology – Automatic identification and data capture techniques – GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance |
| 511 | ISO/IEC 15419:2009 Information technology – Automatic identification and data capture techniques – Bar code digital imaging and printing performance testing |
| 512 | ISO/IEC 15420:2009 Information technology – Automatic identification and data capture techniques – EAN/UPC bar code symbology specification |
| 513 | ISO/IEC 15421:2010 Information technology – Automatic identification and data capture techniques – Bar code master test specifications |
| 514 | ISO/IEC 15423:2009 Information technology – Automatic identification and data capture techniques – Bar code scanner and decoder performance testing |
| 515 | ISO/IEC 15424:2008 Information technology – Automatic identification and data capture techniques – Data Carrier Identifiers (including Symbology Identifiers) |
| 516 | ISO/IEC 15426 Information technology – Automatic identification and data capture techniques – Bar code verifier conformance specification |
| 517 | ISO/IEC 15426-1:2006 Part 1: Linear symbols |
| 518 | ISO/IEC 15426-2:2015 Part 2: Two-dimensional symbols |
| 519 | ISO/IEC 15428:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information Exchange additional network feature |
| 520 | ISO/IEC 15429:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature |
| 521 | ISO/IEC 15430:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless terminal call handling additional network features |
| 522 | ISO/IEC 15431:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless terminal call handling additional network features |
| 523 | ISO/IEC 15432:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Authentication supplementary services (WTAT and WTAN) |
| 524 | ISO/IEC 15433:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Authentication supplementary services |
| 525 | ISO/IEC 15434:2006 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media |
| 526 | ISO/IEC 15437:2001 Information technology – Enhancements to LOTOS (E-LOTOS) |
| 527 | ISO/IEC 15438:2015 Information technology – Automatic identification and data capture techniques – PDF417 bar code symbology specification |
| 528 | ISO/IEC TR 15440:2016 Information technology – Future keyboards and other input devices and entry methods |
| 529 | ISO/IEC TR 15443 Information technology – Security techniques – Security assurance framework |
| 530 | ISO/IEC TR 15443-1:2012 Part 1: Introduction and concepts |
| 531 | ISO/IEC TR 15443-2:2012 Part 2: Analysis |
| 532 | ISO/IEC 15444 Information technology – JPEG 2000 image coding system |
| 533 | ISO/IEC 15444-1:2016 Core coding system |
| 534 | ISO/IEC 15444-2:2004 Extensions |
| 535 | ISO/IEC 15444-3:2007 Motion JPEG 2000 |
| 536 | ISO/IEC 15444-4:2004 Conformance testing |
| 537 | ISO/IEC 15444-5:2015 Reference software |
| 538 | ISO/IEC 15444-6:2013 Part 6: Compound image file format |
| 539 | ISO/IEC 15444-8:2007 Secure JPEG 2000 |
| 540 | ISO/IEC 15444-9:2005 Interactivity tools, APIs and protocols |
| 541 | ISO/IEC 15444-10:2011 Extensions for three-dimensional data |
| 542 | ISO/IEC 15444-11:2007 Wireless |
| 543 | ISO/IEC 15444-12:2015 Part 12: ISO base media file format [Withdrawn, no replacement] |
| 544 | ISO/IEC 15444-13:2008 An entry level JPEG 2000 encoder |
| 545 | ISO/IEC 15444-14:2013 Part 14: XML representation and reference |
| 546 | ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML) |
| 547 | ISO/IEC TR 15446:2009 Information technology – Security techniques – Guide for the production of Protection Profiles and Security Targets |
| 548 | ISO/IEC 15457 Identification cards – Thin flexible cards |
| 549 | ISO/IEC 15457-1:2008 Part 1: Physical characteristics |
| 550 | ISO/IEC 15457-2:2007 Part 2: Magnetic recording technique |
| 551 | ISO/IEC 15457-3:2008 Part 3: Test methods |
| 552 | ISO/IEC 15459 Information technology – Automatic identification and data capture techniques – Unique identification |
| 553 | ISO/IEC 15459-1:2014 Part 1: Individual transport units |
| 554 | ISO/IEC 15459-2:2015 Part 2: Registration procedures |
| 555 | ISO/IEC 15459-3:2014 Part 3: Common rules |
| 556 | ISO/IEC 15459-4:2014 Part 4: Individual products and product packages |
| 557 | ISO/IEC 15459-5:2014 Part 5: Individual returnable transport items (RTIs) |
| 558 | ISO/IEC 15459-6:2014 Part 6: Groupings |
| 559 | ISO 15469:2004 Spatial distribution of daylight – CIE standard general sky |
| 560 | ISO/IEC 15474 Information technology – CDIF framework |
| 561 | ISO/IEC 15474-1:2002 Part 1: Overview |
| 562 | ISO/IEC 15474-2:2002 Part 2: Modelling and extensibility |
| 563 | ISO/IEC 15475 Information technology – CDIF transfer format |
| 564 | ISO/IEC 15475-1:2002 Part 1: General rules for syntaxes and encodings |
| 565 | ISO/IEC 15475-2:2002 Part 2: Syntax SYNTAX.1 |
| 566 | ISO/IEC 15475-3:2002 Part 3: Encoding ENCODING.1 |
| 567 | ISO/IEC 15476 Information technology – CDIF semantic metamodel |
| 568 | ISO/IEC 15476-1:2002 Part 1: Foundation |
| 569 | ISO/IEC 15476-2:2002 Part 2: Common |
| 570 | ISO/IEC 15476-3:2006 Part 3: Data definitions |
| 571 | ISO/IEC 15476-4:2005 Part 4: Data models |
| 572 | ISO/IEC 15476-6:2006 Part 6: State/event models |
| 573 | ISO 15480:2019 Fasteners — Hexagon washer head drilling screws with tapping screw thread |
| 574 | ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread |
| 575 | ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread |
| 576 | ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping screw thread |
| 577 | ISO/IEC 15485:1997 Information technology – Data interchange on 120 mm optical disk cartridges using phase change PD format – Capacity: 650 Mbytes per cartridge |
| 578 | ISO/IEC 15486:1998 Information technology – Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects – Capacity: 2,6 Gbytes per cartridge |
| 579 | ISO 15489 Information and documentation – Records management |
| 580 | ISO 15489-1:2016 Part 1: Concepts and principles |
| 581 | ISO/TR 15489-2:2001 Part 2: Guidelines [Withdrawn, no replacement] |
| 582 | ISO/IEC 15498:1997 Information technology – Data interchange on 90 mm optical disk cartridges – HS-1 format – Capacity: 650 Mbytes per cartridge |
| 583 | ISO/IEC 15504 Information technology – Process assessment |
| 584 | ISO/IEC 15505:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Message Waiting Indication supplementary service |
| 585 | ISO/IEC 15506:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Message Waiting Indication supplementary service |
| 586 | ISO/IEC 15507:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – PINX clock synchronization |
| 587 | ISO 15511:2011 Information and documentation – International standard identifier for libraries and related organizations (ISIL) |
| 588 | ISO 15519 Specification for diagrams for process industry |
| 589 | ISO 15519-1:2010 Part 1: General rules |
| 590 | ISO 15519-2:2015 Part 2: Measurement and control |
| 591 | ISO/IEC 15521:1998 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-3 format using 125 m length tapes |
| 592 | ISO 15529:2010 Optics and photonics – Optical transfer function – Principles of measurement of modulation transfer function (MTF) of sampled imaging systems |
| 593 | ISO 15530 Geometrical product specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement |
| 594 | ISO/TS 15530-1:2013 Part 1: Overview and metrological characteristics |
| 595 | ISO 15530-3:2011 Part 3: Use of calibrated workpieces or measurement standards |
| 596 | ISO/TS 15530-4:2008 Part 4: Evaluating task-specific measurement uncertainty using simulation |
| 597 | ISO 15553:2006 Water quality – Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water |
| 598 | ISO 15583:2005 Ships and marine technology – Maritime standards list |
| 599 | ISO/TR 15599:2002 Digital codification of dental laboratory procedures |
| 600 | ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test |
| 601 | ISO 15622:2010 Intelligent transport systems – Adaptive Cruise Control systems – Performance requirements and test procedures |
| 602 | ISO 15623:2013 Intelligent transport systems – Forward vehicle collision warning systems – Performance requirements and test procedures |
| 603 | ISO/TS 15624:2001 Transport information and control systems – Traffic Impediment Warning Systems (TIWS) – System requirements |
| 604 | ISO 15628:2013 Intelligent transport systems – Dedicated short range communication (DSRC) – DSRC application layer |
| 605 | ISO 15638 Intelligent transport systems – Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV)[Note 4] |
| 606 | ISO 15638-1:2012 Part 1: Framework and architecture |
| 607 | ISO 15638-2:2013 Part 2: Common platform parameters using CALM |
| 608 | ISO 15638-3:2013 Part 3: Operating requirements, ‘Approval Authority’ procedures, and enforcement provisions for the providers of regulated services |
| 609 | ISO 15638-5:2013 Part 5: Generic vehicle information |
| 610 | ISO 15638-6:2014 Part 6: Regulated applications |
| 611 | ISO 15638-7:2013 Part 7: Other applications |
| 612 | ISO 15638-8:2014 Part 8: Vehicle access management |
| 613 | ISO/TS 15638-9:2013 Part 9: Remote electronic tachograph monitoring (RTM) |
| 614 | ISO 15638-10:2017 Part 10: Emergency messaging system/eCall |
| 615 | ISO 15638-11:2014 Part 11: Driver work records |
| 616 | ISO 15638-12:2014 Part 12: Vehicle mass monitoring |
| 617 | ISO/TS 15638-13:2015 Part 13: “Mass” information for jurisdictional control and enforcement |
| 618 | ISO 15638-14:2014 Part 14: Vehicle access control |
| 619 | ISO 15638-15:2014 Part 15: Vehicle location monitoring |
| 620 | ISO 15638-16:2014 Part 16: Vehicle speed monitoring |
| 621 | ISO 15638-17:2014 Part 17: Consignment and location monitoring |
| 622 | ISO 15638-18:2017 Part 18: ADR (Dangerous Goods) |
| 623 | ISO/TS 15638-19:2013 Part 19: Vehicle parking facilities (VPF) |
| 624 | ISO 15642:2003 Road construction and maintenance equipment – Asphalt mixing plants – Terminology and commercial specifications |
| 625 | ISO 15662:2006 Intelligent transport systems – Wide area communication – Protocol management information |
| 626 | ISO 15664:2001 Acoustics – Noise control design procedures for open plant |
| 627 | ISO 15665:2003 Acoustics – Acoustic insulation for pipes, valves and flanges |
| 628 | ISO 15667:2000 Acoustics – Guidelines for noise control by enclosures and cabins |
| 629 | ISO 15674:2016 Cardiovascular implants and artificial organs – Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
| 630 | ISO 15675:2016 Cardiovascular implants and artificial organs – Cardiopulmonary bypass systems – Arterial blood line filters |
| 631 | ISO 15676:2016 Cardiovascular implants and artificial organs – Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) |
| 632 | ISO 15686 Buildings and constructed assets – Service life planning |
| 633 | ISO 15688:2012 Road construction and maintenance equipment – Soil stabilizers – Terminology and commercial specifications |
| 634 | ISO 15689:2003 Road construction and maintenance equipment – Powder binder spreaders – Terminology and commercial specifications |
| 635 | ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards |
| 636 | ISO/TS 15696:2012 Cranes – List of equivalent terms |
| 637 | ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN) |
| 638 | ISO 15707:2001 Information and documentation – International Standard Musical Work Code (ISWC) |
| 639 | ISO/IEC 15718:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – HH-1 format |
| 640 | ISO/IEC 15731:1998 Information technology – 12,65 mm wide magnetic tape cassette for information interchange – Helical scan recording – DTF-1 format |
| 641 | ISO 15744:2002 Hand-held non-electric power tools – Noise measurement code – Engineering method (grade 2) |
| 642 | ISO 15747:2010 Plastic containers for intravenous injections |
| 643 | ISO 15752:2010 Ophthalmic instruments – Endoilluminators – Fundamental requirements and test methods for optical radiation safety |
| 644 | ISO/IEC 15757:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – DA-2 format |
| 645 | ISO 15759:2005 Medical infusion equipment – Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process |
| 646 | ISO/TS 15768:2000 Measurement of liquid velocity in open channels – Design, selection and use of electromagnetic current meters |
| 647 | ISO 15769:2010 Hydrometry – Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods |
| 648 | ISO/IEC 15771:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Common information additional network feature |
| 649 | ISO/IEC 15772:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Common Information additional network feature |
| 650 | ISO/IEC 15773:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature |
| 651 | ISO/IEC 15776:2001 VME64bus – Specification |
| 652 | ISO/IEC 15780:1998 Information technology – 8 mm wide magnetic tape cartridge – Helical scan recording – AIT-1 format |
| 653 | ISO 15782 Certificate management for financial services[Note 4] |
| 654 | ISO 15782-1:2009 Part 1: Public key certificates |
| 655 | ISO 15782-2:2001 Part 2: Certificate extensions |
| 656 | ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification |
| 657 | ISO 15784 Intelligent transport systems (ITS) – Data exchange involving roadside modules communication |
| 658 | ISO 15784-1:2008 Part 1: General principles and documentation framework of application profiles |
| 659 | ISO 15784-2:2015 Part 2: Centre to field device communications using SNMP |
| 660 | ISO 15784-3:2008 Part 3: Application profile-data exchange (AP-DATEX) |
| 661 | ISO 15785:2002 Technical drawings – Symbolic presentation and indication of adhesive, fold and pressed joints |
| 662 | ISO 15786:2008 Technical drawings – Simplified representation and dimensioning of holes |
| 663 | ISO 15787:2016 Technical product documentation – Heat-treated ferrous parts – Presentation and indications |
| 664 | ISO 15798:2013 Ophthalmic implants – Ophthalmic viscosurgical devices |
| 665 | ISO/IEC 15802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Common specifications |
| 666 | ISO/IEC 15802-1:1995 Part 1: Medium Access Control (MAC) service definition |
| 667 | ISO/IEC 15802-3:1998 Part 3: Media Access Control (MAC) Bridges |
| 668 | ISO/IEC 15816:2002 Information technology – Security techniques – Security information objects for access control |
| 669 | ISO 15836:2009 Information and documentation – The Dublin Core metadata element set |
| 670 | ISO 15836-1:2017 Part 1: Core elements |
| 671 | ISO/TR 15847:2008 Graphic technology – Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment |
| 672 | ISO 15849:2001 Ships and marine technology – Guidelines for implementation of a fleet management system network |
| 673 | ISO/IEC 15851:1999 Information technology – Communication protocol – Open MUMPS Interconnect |
| 674 | ISO/IEC 15852:1999 Information technology – Programming languages – M Windowing API |
| 675 | ISO 15867:2003 Intermediate bulk containers (IBCs) for non-dangerous goods – Terminology |
| 676 | ISO 15870:2000 Powered industrial trucks – Safety signs and hazard pictorials – General principles |
| 677 | ISO 15878:2008 Road construction and maintenance equipment – Asphalt pavers – Terminology and commercial specifications |
| 678 | ISO/IEC 15895:1999 Information technology – Data interchange on 12,7 mm 128-track magnetic tape cartridges – DLT 3-XT format |
| 679 | ISO/IEC 15896:1999 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges – DLT 5 format |
| 680 | ISO/IEC 15897:2011 Information technology – User interfaces – Procedures for the registration of cultural elements |
| 681 | ISO 15883-1:2006 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice. |
| 682 | ISO/IEC 15898:1998 Information technology – Data interchange on 356 mm optical disk cartridges – WORM, using phase change technology – Capacity: 14,8 Gbytes and 25 Gbytes per cartridge |
| 683 | ISO/IEC 15899:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Service description – Broadband connection oriented bearer services |
| 684 | ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption |
| 685 | ISO 15902:2004 Optics and photonics – Diffractive optics – Vocabulary |
| 686 | ISO/IEC 15909 Systems and software engineering – High-level Petri nets |
| 687 | ISO/IEC 15909-1:2004 Part 1: Concepts, definitions and graphical notation |
| 688 | ISO/IEC 15909-2:2011 Part 2: Transfer format |
| 689 | ISO 15919:2001 Information and documentation – Transliteration of Devanagari and related Indic scripts into Latin characters |
| 690 | ISO 15924:2004 Information and documentation – Codes for the representation of names of scripts |
| 691 | ISO 15926 – Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities |
| 692 | ISO 15927 Hygrothermal performance of buildings – Calculation and presentation of climatic data |
| 693 | ISO 15927-1:2003 Part 1: Monthly means of single meteorological elements |
| 694 | ISO 15927-2:2009 Part 2: Hourly data for design cooling load |
| 695 | ISO 15927-3:2009 Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data |
| 696 | ISO 15927-4:2005 Part 4: Hourly data for assessing the annual energy use for heating and cooling |
| 697 | ISO 15927-5:2004 Part 5: Data for design heat load for space heating |
| 698 | ISO 15927-6:2007 Part 6: Accumulated temperature differences (degree-days) |
| 699 | ISO 15930 Graphic technology – Prepress digital data exchange using PDF[Note 4] |
| 700 | ISO 15932:2013 Microbeam analysis – Analytical electron microscopy – Vocabulary |
| 701 | ISO/IEC 15938 Information technology – Multimedia content description interface |
| 702 | ISO/IEC/IEEE 15939:2017 Systems and software engineering – Measurement process |
| 703 | ISO/IEC 15940:2013 Systems and software engineering – Software Engineering Environment Services |
| 704 | ISO/IEC TR 15942:2000 Information technology – Programming languages – Guide for the use of the Ada programming language in high integrity systems |
| 705 | ISO/IEC 15944 Information technology – Business operational view |
| 706 | ISO/IEC 15944-1:2011 Part 1: Operational aspects of open-edi for implementation |
| 707 | ISO/IEC 15944-2:2015 Part 2: Registration of scenarios and their components as business objects |
| 708 | ISO/IEC 15944-4:2015 Part 4: Business transaction scenarios – Accounting and economic ontology |
| 709 | ISO/IEC 15944-5:2008 Part 5: Identification and referencing of requirements of jurisdictional domains as sources of external constraints |
| 710 | ISO/IEC TR 15944-6:2015 Part 6: Technical introduction to e-Business modelling |
| 711 | ISO/IEC 15944-7:2009 Part 7: eBusiness vocabulary |
| 712 | ISO/IEC 15944-8:2012 Part 8: Identification of privacy protection requirements as external constraints on business transactions |
| 713 | ISO/IEC 15944-9:2015 Part 9: Business transaction traceability framework for commitment exchange |
| 714 | ISO/IEC 15944-10:2013 Part 10: IT-enabled coded domains as semantic components in business transactions |
| 715 | ISO/IEC 15944-20:2015 Part 20: Linking business operational view to functional service view |
| 716 | ISO/IEC 15945:2002 Information technology – Security techniques – Specification of TTP services to support the application of digital signatures |
| 717 | ISO/IEC 15946 Information technology – Security techniques – Cryptographic techniques based on elliptic curves |
| 718 | ISO/IEC 15946-1:2016 Part 1: General |
| 719 | ISO/IEC 15946-5:2017 Part 5: Elliptic curve generation |
| 720 | ISO/IEC 15948 Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification |
| 721 | ISO/IEC 15953:1999 Information technology – Open Systems Interconnection – Service definition for the Application Service Object Association Control Service Element |
| 722 | ISO/IEC 15954:1999 Information technology – Open Systems Interconnection – Connection-mode protocol for the Application Service Object Association Control Service Element |
| 723 | ISO/IEC 15955:1999 Information technology – Open Systems Interconnection – Connectionless protocol for the Application Service Object Association Control Service Element |
| 724 | ISO/IEC 15961 Information technology – Radio frequency identification (RFID) for item management: Data protocol |
| 725 | ISO/IEC 15961-1:2013 Part 1: Application interface |
| 726 | ISO/IEC 15961-4:2016 Part 4: Application interface commands for battery assist and sensor functionality |
| 727 | ISO/IEC 15962:2013 Information technology – Radio frequency identification (RFID) for item management – Data protocol: data encoding rules and logical memory functions |
| 728 | ISO/IEC 15963:2009 Information technology – Radio frequency identification for item management – Unique identification for RF tags |
| 729 | ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor |
| 730 | ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index |
| 731 | ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas |
| 732 | ISO/IEC 15991:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Priority Interruption and Call Priority Interruption Protection supplementary services |
| 733 | ISO/IEC 15992:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Priority Interruption and Call Priority Interruption Protection supplementary services |
