| # | Standards |
| 1 | ISO 12001:1996 Acoustics – Noise emitted by machinery and equipment – Rules for the drafting and presentation of a noise test code |
| 2 | ISO 12005:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Polarization |
| 3 | ISO 12006 Building construction – Organization of information about construction works |
| 4 | ISO 12013:2012 Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — |
| 5 | ISO/TS 12025:2012 Nano materials – Quantification of nano-object release from powders by generation of aerosols |
| 6 | ISO/IEC 12042:1993 Information technology – Data compression for information interchange – Binary arithmetic coding algorithm |
| 7 | ISO 12052:2017 Health informatics – Digital imaging and communication in medicine (DICOM) including workflow and data management |
| 8 | ISO 12083:1994 Information and documentation – Electronic manuscript preparation and markup |
| 9 | ISO 12085:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Motif parameters |
| 10 | ISO/IEC 12087 Information technology – Computer graphics and image processing – Image Processing and Interchange (IPI) – Functional specification |
| 11 | ISO/IEC 12087-1:1995 Part 1: Common architecture for imaging |
| 12 | ISO/IEC 12087-2:1994 Part 2: Programmer’s imaging kernel system application programme interface |
| 13 | ISO/IEC 12087-3:1995 Part 3: Image Interchange Facility (IIF) |
| 14 | ISO/IEC 12087-5:1998 Part 5: Basic Image Interchange Format (BIIF) |
| 15 | ISO/IEC 12088-4:1995 Information technology – Computer graphics and image processing – Image processing and interchange – Application program interface language bindings |
| 16 | ISO/IEC 12089:1997 Information technology – Computer graphics and image processing – Encoding for the Image Interchange Facility (IIF) |
| 17 | ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction |
| 18 | ISO/IEC 12139 Information technology – Telecommunications and information exchange between systems – Powerline communication (PLC) – High speed PLC medium access control (MAC) and physical layer (PHY) |
| 19 | ISO/IEC 12097:2002 Road vehicles — Airbag components |
| 20 | ISO/IEC 12139-1:2009 Part 1: General requirements |
| 21 | ISO 12163:1999 Dental baseplate/modelling wax [Withdrawn: replaced with ISO 15854] |
| 22 | ISO 12164 Hollow taper interface with flange contact surface |
| 23 | ISO 12164-1:2001 Part 1: Shanks — Dimensions |
| 24 | ISO 12164-2:2001 Part 2: Receivers — Dimensions |
| 25 | ISO 12164-3:2014 Part 3: Dimensions of shanks for stationary tools |
| 26 | ISO 12164-4:2014 Part 4: Dimensions of receivers for stationary tools |
| 27 | ISO 12165:2000 Tools for moulding – Components of compression and injection moulds and diecasting dies – Terms and symbols |
| 28 | ISO 12176 Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems |
| 29 | ISO 12176-3:2011 Part 3: Operator’s badge |
| 30 | ISO 12179:2000 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Calibration of contact (stylus) instruments |
| 31 | ISO 12180 Geometrical product specifications (GPS) – Cylindricity |
| 32 | ISO 12180-1:2011 Part 1: Vocabulary and parameters of cylindrical form |
| 33 | ISO 12180-2:2011 Part 2: Specification operators |
| 34 | ISO 12181 Geometrical product specifications (GPS) – Roundness |
| 35 | ISO 12181-1:2011 Part 1: Vocabulary and parameters of roundness |
| 36 | ISO 12181-2:2011 Part 2: Specification operators |
| 37 | ISO/IEC TR 12182:2015 Systems and software engineering – Framework for categorization of IT systems and software, and guide for applying it |
| 38 | ISO 12188 Tractors and machinery for agriculture and forestry – Test procedures for positioning and guidance systems in agriculture |
| 39 | ISO 12188-1:2010 Part 1: Dynamic testing of satellite-based positioning devices |
| 40 | ISO 12188-2:2012 Part 2: Testing of satellite-based auto-guidance systems during straight and level travel |
| 41 | ISO 12189:2008 Implants for surgery – Mechanical testing of implantable spinal devices – Fatigue test method for spinal implant assemblies using an anterior support |
| 42 | ISO 12199:2000 Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet |
| 43 | ISO/IEC 12207 Systems and software engineering – Software life cycle processes |
| 44 | ISO 12231:2012 Photography – Electronic still picture imaging – Vocabulary |
| 45 | ISO 12242:2012 Measurement of fluid flow in closed conduits – Ultrasonic transit-time meters for liquid |
| 46 | ISO/IEC 12246:1993 Information technology – 8 mm wide magnetic tape cartridge dual azimuth format for information interchange – Helical scan recording |
| 47 | ISO/IEC 12247:1993 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS format using 60 m and 90 m length tapes |
| 48 | ISO/IEC 12248:1993 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT-DC format using 60 m and 90 m length tapes |
| 49 | ISO/TR 12300:2014 Health informatics – Principles of mapping between terminological systems |
| 50 | ISO/TR 12309:2009 Health informatics – Guidelines for terminology development organizations |
| 51 | ISO/TR 12310:2015 Health informatics – Principles and guidelines for the measurement of conformance in the implementation of terminological systems |
| 52 | ISO 12353 Road vehicles – Traffic accident analysis |
| 53 | ISO 12353-1:2002 Part 1: Vocabulary |
| 54 | ISO/IEC TR 12382:1992 Permuted index of the vocabulary of information technology |
| 55 | ISO 12417 Cardiovascular implants and extracorporeal systems – Vascular device-drug combination products |
| 56 | ISO 12417-1:2015 Part 1: General requirements |
| 57 | ISO 12543 Glass in building – Laminated glass and laminated safety glass |
| 58 | ISO 12543-1:2011 Part 1: Definitions and description of component parts |
| 59 | ISO 12615:2004 Bibliographic references and source identifiers for terminology work |
| 60 | ISO 12616:2002 Translation-oriented terminography |
| 61 | ISO 12620:2019 Management of terminology resources — Data category specifications |
| 62 | ISO 12625 Tissue paper and tissue products |
| 63 | ISO 12625-1:2011 Part 1: General guidance on terms |
| 64 | ISO 12637 Graphic technology – Vocabulary |
| 65 | ISO 12637-1:2006 Part 1: Fundamental terms |
| 66 | ISO 12637-2:2008 Part 2: Prepress terms |
| 67 | ISO 12637-3:2009 Part 3: Printing terms |
| 68 | ISO 12637-4:2008 Part 4: Postpress terms |
| 69 | ISO 12639:2004 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT) |
| 70 | ISO 12640 Graphic technology – Prepress digital data exchange |
| 71 | ISO 12640-1:1997 Part 1: CMYK standard colour image data (CMYK/SCID) |
| 72 | ISO 12640-2:2004 Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) |
| 73 | ISO 12640-3:2007 Part 3: CIELAB standard colour image data (CIELAB/SCID) |
| 74 | ISO 12640-4:2011 Part 4: Wide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID] |
| 75 | ISO 12640-5:2013 Part 5: Scene-referred standard colour image data (RIMM/SCID) |
| 76 | ISO 12641:1997 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration |
| 77 | ISO 12641-1:2016 Part 1: Colour targets for input scanner calibration |
| 78 | ISO 12642 Graphic technology – Input data for characterization of four-colour process printing |
| 79 | ISO 12642-1:2011 Part 1: Initial data set |
| 80 | ISO 12642-2:2006 Part 2: Expanded data set |
| 81 | ISO 12651 Electronic document management – Vocabulary |
| 82 | ISO 12651-1:2012 Part 1: Electronic document imaging |
| 83 | ISO 12651-2:2014 Part 2: Workflow management |
| 84 | ISO 12671:2012 Thermal spraying – Thermally sprayed coatings – Symbolic representation on drawings |
| 85 | ISO 12706:2009 Non-destructive testing – Penetrant testing – Vocabulary |
| 86 | ISO 12707:2016 Non-destructive testing – Magnetic particle testing – Vocabulary |
| 87 | ISO 12716:2001 Non-destructive testing – Acoustic emission inspection – Vocabulary |
| 88 | ISO 12718:2008 Non-destructive testing – Eddy current testing – Vocabulary |
| 89 | ISO 12749 Nuclear energy, nuclear technologies, and radiological protection – Vocabulary |
| 90 | ISO 12749-2:2013 Part 2: Radiological protection |
| 91 | ISO 12749-3:2015 Part 3: Nuclear fuel cycle |
| 92 | ISO 12749-4:2015 Part 4: Dosimetry for radiation processing |
| 93 | ISO 12756:2016 Drawing and writing instruments – Ball point pens and roller ball pens – Vocabulary |
| 94 | ISO 12757 Ball point pens and refills |
| 95 | ISO 12757-2:1998 Part 2: Documentary use (DOC) |
| 96 | ISO 12764:2017 Measurement of fluid flow in closed conduits – Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
| 97 | ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices – Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167 |
| 98 | ISO/TR 12773 Business requirements for health summary records |
| 99 | ISO/TR 12773-1:2009 Part 1: Requirements |
| 100 | ISO/TR 12773-2:2009 Part 2: Environmental scan |
| 101 | ISO 12780 Geometrical product specifications (GPS) – Straightness |
| 102 | ISO 12780-1:2011 Part 1: Vocabulary and parameters of straightness |
| 103 | ISO 12780-2:2011 Part 2: Specification operators |
| 104 | ISO 12781 Geometrical product specifications (GPS) – Flatness |
| 105 | ISO 12781-1:2011 Part 1: Vocabulary and parameters of flatness |
| 106 | ISO 12781-2:2011 Part 2: Specification operators |
| 107 | ISO/IEC 12785 Information technology – Learning, education, and training – Content packaging |
| 108 | ISO/IEC 12785-1:2009 Part 1: Information model |
| 109 | ISO/IEC 12785-2:2011 Part 2: XML binding |
| 110 | ISO/IEC TR 12785-3:2012 Part 3: Best practice and implementation guide |
| 111 | ISO 12789 Reference radiation fields – Simulated workplace neutron fields |
| 112 | ISO 12789-1:2008 Part 1: Characteristics and methods of production |
| 113 | ISO 12789-2:2008 Part 2: Calibration fundamentals related to the basic quantities |
| 114 | ISO/TR 12802:2010 Nanotechnologies – Model taxonomic framework for use in developing vocabularies – Core concepts |
| 115 | ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects |
| 116 | ISO 12812 Core banking – Mobile financial services |
| 117 | ISO 12812-1:2017 Part 1: General framework |
| 118 | ISO/TS 12812-2:2017 Part 2: Security and data protection for mobile financial services |
| 119 | ISO/TS 12812-3:2017 Part 3: Financial application lifecycle management |
| 120 | ISO/TS 12812-4:2017 Part 4: Mobile payments-to-persons |
| 121 | ISO/TS 12812-5:2017 Part 5: Mobile payments to businesses |
| 122 | ISO 12813:2015 Electronic fee collection – Compliance check communication for autonomous systems |
| 123 | ISO 12836:2015 Dentistry – Digitizing devices for CAD/CAM systems for indirect dental restorations – Test methods for assessing accuracy |
| 124 | ISO/TR 12845:2010 Selected illustrations of fractional factorial screening experiments |
| 125 | ISO 12855:2015 Electronic fee collection – Information exchange between service provision and toll charging |
| 126 | ISO 12858 Optics and optical instruments – Ancillary devices for geodetic instruments |
| 127 | ISO 12858-1:2014 Part 1: Invar levelling staffs |
| 128 | ISO 12858-2:1999 Part 2: Tripods |
| 129 | ISO 12858-3:2005 Part 3: Tribrachs |
| 130 | ISO/TR 12859:2009 Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems |
| 131 | ISO/IEC TR 12860:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – General |
| 132 | ISO/IEC TR 12861:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Identification and routing |
| 133 | ISO/IEC 12862:2011 Information technology – 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL) |
| 134 | ISO 12865:2006 Ophthalmic instruments – Retinoscopes |
| 135 | ISO 12866:1999 Ophthalmic instruments – Perimeters |
| 136 | ISO 12867:2010 Ophthalmic instruments – Trial frames |
| 137 | ISO/TS 12869:2012 Water quality – Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR) |
| 138 | ISO 12870:2016 Ophthalmic optics – Spectacle frames – Requirements and test methods |
| 139 | ISO/TR 12885:2008 Nanotechnologies – Health and safety practices in occupational settings relevant to nanotechnologies |
| 140 | ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies |
| 141 | ISO 12891 Retrieval and analysis of surgical implants |
| 142 | ISO 12891-1:2015 Part 1: Retrieval and handling |
| 143 | ISO 12891-2:2014 Part 2: Analysis of retrieved surgical implants |
| 144 | ISO/TS 12901 Nanotechnologies – Occupational risk management applied to engineered nanomaterials |
| 145 | ISO/TS 12901-1:2012 Part 1: Principles and approaches |
| 146 | ISO/TS 12901-2:2014 Part 2: Use of the control banding approach |
| 147 | ISO/IEC 12905:2011 Integrated circuit cards – Enhanced terminal accessibility using cardholder preference interface |
| 148 | ISO 12912:2014 Circular knitting machines – Vocabulary |
| 149 | ISO 12913 Acoustics – Soundscape |
| 150 | ISO 12913-1:2014 Part 1: Definition and conceptual framework |
| 151 | ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods |
| 152 | ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems |
| 153 | ISO 12967 Health informatics – Service architecture |
| 154 | ISO 12967-1:2009 Part 1: Enterprise viewpoint |
| 155 | ISO 12967-2:2009 Part 2: Information viewpoint |
| 156 | ISO 12967-3:2009 Part 3: Computational viewpoint |
| 157 | ISO 12999 Acoustics – Determination and application of measurement uncertainties in building acoustics |
| 158 | ISO 12999-1:2014 Part 1: Sound insulation |
| 159 | ISO 13006:2012 Ceramic tiles – Definitions, classification, characteristics and marking |
| 160 | ISO 13007 Ceramic tiles – Grouts and adhesives |
| 161 | ISO 13007-1:2014 Terms, definitions and specifications for adhesives |
| 162 | ISO 13007-2:2010 Test methods for adhesives |
| 163 | ISO 13007-3:2010 Terms, definitions and specifications for grouts |
| 164 | ISO 13007-4:2013 Test methods for grouts |
| 165 | ISO 13008:2012 Information and documentation – Digital records conversion and migration process |
| 166 | ISO 13009:2015 Tourism and related services – Requirements and recommendations for beach operation |
| 167 | ISO/TR 13014:2012 Nanotechnologies – Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| 168 | ISO/TR 13028:2010 Information and documentation – Implementation guidelines for digitization of records |
| 169 | ISO 13053 Quantitative methods in process improvement – Lean and Six Sigma |
| 170 | ISO 13053-1:2011 Part 1: DMAIC methodology |
| 171 | ISO 13053-2:2011 Part 2: Tools and techniques |
| 172 | ISO/TR 13054:2012 Knowledge management of health information standards |
| 173 | ISO/TR 13062:2015 Electric mopeds and motorcycles – Terminology and classification |
| 174 | ISO/IEC 13066 Information technology – Interoperability with assistive technology (AT) |
| 175 | ISO/IEC 13066-1:2011 Part 1: Requirements and recommendations for interoperability |
| 176 | ISO/IEC TR 13066-2:2016 Part 2: Windows accessibility application programming interface (API) |
| 177 | ISO/IEC TR 13066-3:2012 Part 3: IAccessible2 accessibility application programming interface (API) |
| 178 | ISO/IEC TR 13066-4:2015 Part 4: Linux/UNIX graphical environments accessibility API |
| 179 | ISO/IEC TR 13066-6:2014 Part 6: Java accessibility application programming interface (API) |
| 180 | ISO 13078 Dentistry – Dental furnace |
| 181 | ISO 13078-2:2016 Part 2: Test method for evaluation of furnace programme via firing glaze |
| 182 | ISO 13102:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment: Electronic digital-indicator gauge – Design and metrological characteristics |
| 183 | ISO 13105 Building construction machinery and equipment – Machinery for concrete surface floating and finishing |
| 184 | ISO 13105-1:2014 Part 1: Terms and commercial specifications |
| 185 | ISO 13111 Intelligent transport systems (ITS) – The use of personal ITS station to support ITS service provision for travellers |
| 186 | ISO 13111-1:2017 Part 1: General information and use case definitions |
| 187 | ISO 13119:2012 Health informatics – Clinical knowledge resources – Metadata |
| 188 | ISO 13120:2013 Health informatics – Syntax to represent the content of healthcare classification systems – Classification Markup Language (ClaML) |
| 189 | ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation |
| 190 | ISO 13127:2012 Packaging – Child resistant packaging – Mechanical test methods for reclosable child resistant packaging systems |
| 191 | ISO/TR 13128:2012 Health Informatics – Clinical document registry federation |
| 192 | ISO/TS 13131:2014 Health informatics – Telehealth services – Quality planning guidelines |
| 193 | ISO/TS 13136:2012 Microbiology of food and animal feed – Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens – Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups |
| 194 | ISO 13140 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 13141 |
| 195 | ISO 13140-1:2016 Part 1: Test suite structure and test purposes |
| 196 | ISO 13140-2:2016 Part 2: Abstract test suite |
| 197 | ISO 13141:2015 Electronic fee collection – Localisation augmentation communication for autonomous systems |
| 198 | ISO 13142:2015 Electro-optical systems – Cavity ring-down technique for high-reflectance measurement |
| 199 | ISO 13143 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 12813 |
| 200 | ISO 13143-1:2016 Part 1: Test suite structure and test purposes |
| 201 | ISO 13143-2:2016 Part 2: Abstract test suite |
| 202 | ISO/TR 13154:2017 Medical electrical equipment – Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph |
| 203 | ISO/IEC 13156:2011 Information technology – Telecommunications and information exchange between systems – High rate 60 GHz PHY, MAC and PALs |
| 204 | ISO/IEC 13157 Information technology – Telecommunications and information exchange between systems – NFC Security |
| 205 | ISO/IEC 13157-1:2014 Part 1: NFC-SEC NFCIP-1 security services and protocol |
| 206 | ISO/IEC 13157-2:2016 Part 2: NFC-SEC cryptography standard using ECDH and AES |
| 207 | ISO/IEC 13157-3:2016 Part 3: NFC-SEC cryptography standard using ECDH-256 and AES-GCM |
| 208 | ISO/IEC 13157-4:2016 Part 4: NFC-SEC entity authentication and key agreement using asymmetric cryptography |
| 209 | ISO/IEC 13157-5:2016 Part 5: NFC-SEC entity authentication and key agreement using symmetric cryptography |
| 210 | ISO 13160:2012 Water quality – Strontium 90 and strontium 89 – Test methods using liquid scintillation counting or proportional counting |
| 211 | ISO 13161:2011 Water quality – Measurement of polonium 210 activity concentration in water by alpha spectrometry |
| 212 | ISO 13162:2011 Water quality – Determination of carbon 14 activity – Liquid scintillation counting method |
| 213 | ISO 13163:2013 Water quality – Lead-210 – Test method using liquid scintillation counting |
| 214 | ISO 13164 Water quality – Radon-222 |
| 215 | ISO 13164-1:2013 Part 1: General principles |
| 216 | ISO 13164-2:2013 Part 2: Test method using gamma-ray spectrometry |
| 217 | ISO 13164-3:2013 Part 3: Test method using emanometry |
| 218 | ISO 13164-4:2015 Part 4: Test method using two-phase liquid scintillation counting |
| 219 | ISO 13165 Water quality – Radium-226 |
| 220 | ISO 13165-1:2013 Part 1: Test method using liquid scintillation counting |
| 221 | ISO 13165-2:2014 Part 2: Test method using emanometry |
| 222 | ISO 13165-3:2016 Part 3: Test method using coprecipitation and gamma-spectrometry |
| 223 | ISO 13167:2015 Water quality – Plutonium, americium, curium and neptunium – Test method using alpha spectrometry |
| 224 | ISO/IEC 13170:2009 Information technology – 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD re-recordable disk for dual layer (DVD-RW for DL) |
| 225 | ISO 13175 Implants for surgery – Calcium phosphates |
| 226 | ISO 13175-3:2012 Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| 227 | ISO 13179 Implants for surgery – Plasma-sprayed unalloyed titanium coatings on metallic surgical implants |
| 228 | ISO 13179-1:2014 Part 1: General requirements |
| 229 | ISO 13183:2012 Intelligent transport systems – Communications access for land mobiles (CALM) – Using broadcast communications |
| 230 | ISO 13184 Intelligent transport systems (ITS) – Guidance protocol via personal ITS station for advisory safety systems |
| 231 | ISO/TR 13184-1:2013 Part 1: General information and use case definitions |
| 232 | ISO 13184-2:2016 Part 2: Road guidance protocol (RGP) requirements and specification |
| 233 | ISO 13185 Intelligent transport systems – Vehicle interface for provisioning and support of ITS services |
| 234 | ISO/TR 13185-1:2012 Part 1: General information and use case definition |
| 235 | ISO 13185-2:2015 Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface |
| 236 | ISO/IEC 13187:2011 Information technology – Server management command line protocol (SM CLP) specification |
| 237 | ISO/TR 13195:2015 Selected illustrations of response surface method – Central composite design |
| 238 | ISO 13200:1995 Cranes – Safety signs and hazard pictorials – General principles |
| 239 | ISO 13203:2005 Chains, sprockets and accessories – List of equivalent terms |
| 240 | ISO/IEC 13210:1999 Information technology – Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards |
| 241 | ISO/IEC 13211 Information technology – Programming languages – Prolog |
| 242 | ISO/IEC 13211-1:1995 Part 1: General core |
| 243 | ISO/IEC 13211-2:2000 Part 2: Modules |
| 244 | ISO 13212:2014 Ophthalmic optics – Contact lens care products – Guidelines for determination of shelf-life |
| 245 | ISO/IEC 13213:1994 Information technology – Microprocessor systems – Control and Status Registers (CSR) Architecture for microcomputer buses |
| 246 | ISO 13225:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment; Height gauges – Design and metrological characteristics |
| 247 | ISO/IEC TR 13233:1995 Information technology – Interpretation of accreditation requirements in ISO/IEC Guide 25 – Accreditation of Information Technology and Telecommunications testing laboratories for software and protocol testing services |
| 248 | ISO/IEC 13235 Information technology – Open Distributed Processing – Trading function |
| 249 | ISO/IEC 13235-1:1998 Specification |
| 250 | ISO/IEC 13235-3:1998 Part 3: Provision of Trading Function using OSI Directory service |
| 251 | ISO/IEC 13236:1998 Information technology – Quality of service: Framework |
| 252 | ISO/IEC 13238 Information technology – Data Management |
| 253 | ISO/IEC 13238-3:1998 Part 3: IRDS export/import facility |
| 254 | ISO/IEC 13239:2002 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures |
| 255 | ISO/IEC 13240:2001 Information technology – Document description and processing languages – Interchange Standard for Multimedia Interactive Documents (ISMID) |
| 256 | ISO/IEC 13241:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Route Restriction Class additional network feature |
| 257 | ISO/IEC 13242:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Route Restriction Class additional network feature |
| 258 | ISO/IEC 13244:1998 Information technology – Open Distributed Management Architecture |
| 259 | ISO/IEC 13246:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Signalling ATM adaptation layer |
| 260 | ISO/IEC 13247:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Basic call/connection control |
| 261 | ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application |
| 262 | ISO/IEC 13249-1:2016 Part 1: Framework |
| 263 | ISO/IEC 13249-2:2003 Part 2: Full-Text |
| 264 | ISO/IEC 13249-3:2016 Part 3: Spatial |
| 265 | ISO/IEC 13249-5:2003 Part 5: Still image |
| 266 | ISO/IEC 13249-6:2006 Part 6: Data mining |
| 267 | ISO/IEC TS 13249-7:2013 Part 7: History |
| 268 | ISO/IEC 13250 Information technology – Topic Maps[Note 3] |
| 269 | ISO/IEC 13251:2004 Collection of graphical symbols for office equipment |
| 270 | ISO/IEC 13252:1999 Information technology – Enhanced communications transport service definition |
| 271 | ISO 13261 Sound power rating of air-conditioning and air source heat pump equipment |
| 272 | ISO 13261-1:1998 Part 1: Non-ducted outdoor equipment |
| 273 | ISO 13261-2:1998 Part 2: Non-ducted indoor equipment |
| 274 | ISO 13274:2013 Packaging – Transport packaging for dangerous goods – Plastics compatibility testing for packaging and IBCs |
| 275 | ISO/TS 13278:2011 Nanotechnologies – Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry |
| 276 | ISO 13289:2011 Recreational diving services – Requirements for the conduct of snorkelling excursions |
| 277 | ISO 13293:2012 Recreational diving services – Requirements for gas blender training programmes |
| 278 | ISO 13300 Sensory analysis – General guidance for the staff of a sensory evaluation laboratory |
| 279 | ISO 13300-1:2006 Part 1: Staff responsibilities |
| 280 | ISO 13300-2:2006 Part 2: Recruitment and training of panel leaders |
| 281 | ISO 13304 Radiological protection – Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation |
| 282 | ISO 13304-1:2013 Part 1: General principles |
| 283 | ISO 13307:2013 Microbiology of food and animal feed – Primary production stage – Sampling techniques |
| 284 | ISO 13320:2009 Particle size analysis – Laser diffraction methods |
| 285 | ISO 13325:2003 Tyres – Coast-by methods for measurement of tyre-to-road sound emission |
| 286 | ISO/TR 13329:2012 Nanomaterials – Preparation of material safety data sheet (MSDS) |
| 287 | ISO 13332:2000 Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| 288 | ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange |
| 289 | ISO/IEC 13346-1:1995 Part 1: General |
| 290 | ISO/IEC 13346-2:1999 Part 2: Volume and boot block recognition |
| 291 | ISO/IEC 13346-3:1999 Part 3: Volume structure |
| 292 | ISO/IEC 13346-4:1999 Part 4: File structure |
| 293 | ISO/IEC 13346-5:1995 Part 5: Record structure |
| 294 | ISO 13347 Industrial fans – Determination of fan sound power levels under standardized laboratory conditions |
| 295 | ISO 13347-1:2004 Part 1: General overview |
| 296 | ISO 13347-2:2004 Part 2: Reverberant room method |
| 297 | ISO 13347-3:2004 Part 3: Enveloping surface methods |
| 298 | ISO 13347-4:2004 Part 4: Sound intensity method |
| 299 | ISO 13349:2010 Fans – Vocabulary and definitions of categories |
| 300 | ISO 13356:2015 Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| 301 | ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods |
| 302 | ISO 13372:2012 Condition monitoring and diagnostics of machines – Vocabulary |
| 303 | ISO 13373 Condition monitoring and diagnostics of machines – Vibration condition monitoring |
| 304 | ISO 13373-1:2002 Part 1: General procedures |
| 305 | ISO 13373-2:2016 Part 2: Processing, analysis and presentation of vibration data |
| 306 | ISO 13373-3:2015 Part 3: Guidelines for vibration diagnosis |
| 307 | ISO 13373-7:2017 Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants |
| 308 | ISO 13373-9:2017 Part 9: Diagnostic techniques for electric motors |
| 309 | ISO 13374 Condition monitoring and diagnostics of machine systems – Data processing, communication and presentation[Note 3] |
| 310 | ISO 13374-1:2003 Part 1: General guidelines |
| 311 | ISO 13374-2:2007 Part 2: Data processing |
| 312 | ISO 13374-3:2012 Part 3: Communication |
| 313 | ISO 13374-4:2015 Part 4: Presentation |
| 314 | ISO 13379 Condition monitoring and diagnostics of machines – Data interpretation and diagnostics techniques |
| 315 | ISO 13379-1:2012 Part 1: General guidelines |
| 316 | ISO 13379-2:2015 Part 2: Data-driven applications |
| 317 | ISO 13381 Condition monitoring and diagnostics of machines – Prognostics |
| 318 | ISO 13381-1:2015 Part 1: General guidelines |
| 319 | ISO 13385 Geometrical product specifications (GPS) – Dimensional measuring equipment |
| 320 | ISO 13385-1:2011 Part 1: Callipers; Design and metrological characteristics |
| 321 | ISO 13385-2:2011 Part 2: Calliper depth gauges; Design and metrological characteristics |
| 322 | ISO 13399 Cutting tool data representation and exchange |
| 323 | ISO 13399-1:2006 Part 1: Overview, fundamental principles and general information model |
| 324 | ISO/TS 13399-2:2014 Part 2: Reference dictionary for the cutting items |
| 325 | ISO/TS 13399-3:2014 Part 3: Reference dictionary for tool items |
| 326 | ISO/TS 13399-4:2014 Part 4: Reference dictionary for adaptive items |
| 327 | ISO/TS 13399-5:2014 Part 5: Reference dictionary for assembly items |
| 328 | ISO/TS 13399-50:2013 Part 50: Reference dictionary for reference systems and common concepts |
| 329 | ISO/TS 13399-60:2014 Part 60: Reference dictionary for connection systems |
| 330 | ISO/TS 13399-70:2016 Part 70: Graphical data layout – Layer setting for tool layout |
| 331 | ISO/TS 13399-71:2016 Part 71: Graphical data layout – Creation of documents for standardized data exchange: Graphical product information |
| 332 | ISO/TS 13399-72:2016 Part 72: Creation of documents for the standardized data exchange – Definition of properties for drawing header and their XML-data exchange |
| 333 | ISO/TS 13399-80:2017 Part 80: Creation and exchange of 3D models – Overview and principles |
| 334 | ISO/TS 13399-100:2008 Part 100: Definitions, principles and methods for reference dictionaries |
| 335 | ISO/TS 13399-150:2008 Part 150: Usage guidelines |
| 336 | ISO/TS 13399-201:2014 Part 201: Creation and exchange of 3D models – Regular inserts |
| 337 | ISO/TS 13399-202:2015 Part 202: Creation and exchange of 3D models – Irregular inserts |
| 338 | ISO/TS 13399-203:2015 Part 203: Creation and exchange of 3D models – Replaceable inserts for drilling |
| 339 | ISO/TS 13399-204:2016 Part 204: Creation and exchange of 3D models – Inserts for reaming |
| 340 | ISO/TS 13399-301:2013 Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies |
| 341 | ISO/TS 13399-302:2013 Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools |
| 342 | ISO/TS 13399-303:2016 Part 303: Creation and exchange of 3D models – Solid end mills |
| 343 | ISO/TS 13399-304:2016 Part 304: Creation and exchange of 3D models – Solid milling cutters with arbor hole |
| 344 | ISO/TS 13399-305:2017 Part 305: Creation and exchange of 3D models – Modular tooling systems with adjustable cartridges for boring |
| 345 | ISO/TS 13399-307:2016 Part 307: Creation and exchange of 3D models – End mills for indexable inserts |
| 346 | ISO/TS 13399-308:2016 Part 308: Creation and exchange of 3D models – Milling cutters with arbor hole for indexable inserts |
| 347 | ISO/TS 13399-309:2016 Part 309: Creation and exchange of 3D models – Tool holders for indexable inserts |
| 348 | ISO/TS 13399-310:2017 Part 310: Creation and exchange of 3D models – Turning tools with carbide tips |
| 349 | ISO/TS 13399-311:2016 Part 311: Creation and exchange of 3D models – Solid reamers |
| 350 | ISO/TS 13399-312:2016 Part 312: Creation and exchange of 3D models – Reamers for indexable inserts |
| 351 | ISO/TS 13399-401:2016 Part 401: Creation and exchange of 3D models – Converting, extending and reducing adaptive items |
| 352 | ISO/TS 13399-405:2016 Part 405: Creation and exchange of 3D models – Collets |
| 353 | ISO 13402:1995 Surgical and dental hand instruments – Determination of resistance against autoclaving, corrosion and thermal exposure |
| 354 | ISO/IEC 13403:1995 Information technology – Information interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the CCS method |
| 355 | ISO 13404:2007 Prosthetics and orthotics – Categorization and description of external orthoses and orthotic components |
| 356 | ISO 13405 Prosthetics and orthotics – Classification and description of prosthetic components |
| 357 | ISO 13405-1:2015 Part 1: Classification of prosthetic components |
| 358 | ISO 13405-2:2015 Part 2: Description of lower limb prosthetic components |
| 359 | ISO 13405-3:2015 Part 3: Description of upper limb prosthetic components |
| 360 | ISO 13406 Ergonomic requirements for work with visual displays based on flat panels |
| 361 | ISO 13406-2:2001 Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14] |
| 362 | ISO 13407:1999 Human-centred design processes for interactive systems (This standard has been revised by ISO 9241-210:2010) |
| 363 | ISO/IEC 13421:1993 Information technology – Data Interchange on 12,7 mm, 48-track magnetic tape cartridges – DLT 1 format |
| 364 | ISO/IEC 13422:1994 Information technology – Data interchange on 90 mm Flexible Disk Cartridges 10 MByte capacity using sector servo tracking – ISO Type 304 |
| 365 | ISO 13444:2012 Technical product documentation (TPD) – Dimensioning and indication of knurling |
| 366 | ISO 13448 Acceptance sampling procedures based on the allocation of priorities principle (APP) |
| 367 | ISO 13448-1:2005 Part 1: Guidelines for the APP approach |
| 368 | ISO 13448-2:2004 Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| 369 | ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions |
| 370 | ISO/TS 13471 Acoustics – Temperature influence on tyre/road noise measurement |
| 371 | ISO/TS 13471-1:2017 Part 1: Correction for temperature when testing with the CPX method |
| 372 | ISO 13472 Acoustics – Measurement of sound absorption properties of road surfaces in situ |
| 373 | ISO 13472-1:2002 Part 1: Extended surface method |
| 374 | ISO 13472-2:2010 Part 2: Spot method for reflective surfaces |
| 375 | ISO 13473 Characterization of pavement texture by use of surface profiles |
| 376 | ISO 13473-1:1997 Part 1: Determination of Mean Profile Depth |
| 377 | ISO 13473-2:2002 Part 2: Terminology and basic requirements related to pavement texture profile analysis |
| 378 | ISO 13473-3:2002 Part 3: Specification and classification of profilometers |
| 379 | ISO/TS 13473-4:2008 Part 4: Spectral analysis of surface profiles |
| 380 | ISO 13473-5:2009 Part 5: Determination of megatexture |
| 381 | ISO 13474:2009 Acoustics – Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment |
| 382 | ISO 13475 Acoustics – Stationary audible warning devices used outdoors |
| 383 | ISO 13475-1:1999 Part 1: Field measurements for determination of sound emission quantities |
| 384 | ISO/TS 13475-2:2000 Part 2: Precision methods for determination of sound emission quantities |
| 385 | ISO/IEC 13481:1993 Information technology – Data interchange on 130 mm optical disk cartridges – Capacity: 1 gigabyte per cartridge |
| 386 | ISO 13482:2014 Robots and robotic devices – Safety requirements for personal care robots |
| 387 | ISO 13485:2016 Medical devices – Quality management systems – Requirements for regulatory purposes |
| 388 | ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange |
| 389 | ISO/IEC 13490-1:1995 Part 1: General |
| 390 | ISO/IEC 13490-2:1995 Part 2: Volume and file structure |
| 391 | ISO 13491 Financial services – Secure cryptographic devices (retail) |
| 392 | ISO 13491-1:2016 Part 1: Concepts, requirements and evaluation methods |
| 393 | ISO 13491-2:2017 Part 2: Security compliance checklists for devices used in financial transactions |
| 394 | ISO 13492:2007 Financial services – Key management related data element – Application and usage of ISO 8583 data elements 53 and 96 |
| 395 | ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software |
| 396 | ISO/IEC 13522 Information technology – Coding of multimedia and hypermedia information |
| 397 | ISO/IEC 13522-1:1997 Part 1: MHEG object representation – Base notation (ASN.1) |
| 398 | ISO/IEC 13522-3:1997 Part 3: MHEG script interchange representation |
| 399 | ISO/IEC 13522-4:1996 Part 4: MHEG registration procedure |
| 400 | ISO/IEC 13522-5:1997 Part 5: Support for base-level interactive applications |
| 401 | ISO/IEC 13522-6:1998 Part 6: Support for enhanced interactive applications |
| 402 | ISO/IEC 13522-7:2001 Part 7: Interoperability and conformance testing for ISO/IEC 13522-5 |
| 403 | ISO/IEC 13522-8:2001 Part 8: XML notation for ISO/IEC 13522-5 |
| 404 | ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison |
| 405 | ISO 13539:1998 Earth-moving machinery – Trenchers – Definitions and commercial specifications |
| 406 | ISO/IEC 13549:1993 Information technology – Data interchange on 130 mm optical disk cartridges – Capacity: 1,3 gigabytes per cartridge |
| 407 | ISO 13550:2002 Hydrometric determinations – Flow measurements in open channels using structures – Use of vertical underflow gates and radial gates |
| 408 | ISO 13559:2002 Butter, fermented milks and fresh cheese – Enumeration of contaminating microorganisms – Colony-count technique at 30 degrees C |
| 409 | ISO/IEC 13560:2009 Information technology – Telecommunications and information exchange between systems – Procedure for the registration of assigned numbers for ISO/IEC 26907 and ISO/IEC 26908 |
| 410 | ISO/IEC TR 13561:1994 Information technology – Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090 |
| 411 | ISO 13565 Geometrical Product Specifications (GPS) – Surface texture: Profile method; Surfaces having stratified functional properties |
| 412 | ISO 13565-1:1996 Part 1: Filtering and general measurement conditions |
| 413 | ISO 13565-2:1996 Part 2: Height characterization using the linear material ratio curve |
| 414 | ISO 13565-3:1998 Part 3: Height characterization using the material probability curve |
| 415 | ISO 13567 Technical product documentation – Organization and naming of layers for CAD |
| 416 | ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics |
| 417 | ISO/TR 13569:2005 Financial services – Information security guidelines |
| 418 | ISO 13574:2015 Industrial furnaces and associated processing equipment – Vocabulary |
| 419 | ISO/IEC 13575:1995 Information technology – Telecommunications and information exchange between systems – 50-pole interface connector mateability dimensions and contact number assignments |
| 420 | ISO 13577 Industrial furnaces and associated processing equipment – Safety |
| 421 | ISO 13577-1:2016 Part 1: General requirements |
| 422 | ISO 13577-2:2014 Part 2: Combustion and fuel handling systems |
| 423 | ISO 13577-3:2016 Part 3: Generation and use of protective and reactive atmosphere gases |
| 424 | ISO 13577-4:2014 Part 4: Protective systems |
| 425 | ISO 13579 Industrial furnaces and associated processing equipment – Method of measuring energy balance and calculating efficiency |
| 426 | ISO 13579-1:2013 General methodology |
| 427 | ISO 13579-2:2013 Reheating furnaces for steel |
| 428 | ISO 13579-3:2013 Batch-type aluminium melting furnaces |
| 429 | ISO 13579-4:2013 Furnaces with protective or reactive atmosphere |
| 430 | ISO/TS 13582:2015 Health informatics – Sharing of OID registry information |
| 431 | ISO 13586:2000 Plastics – Determination of fracture toughness (GIC and KIC) – Linear elastic fracture mechanics (LEFM) approach |
| 432 | ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty |
| 433 | ISO/IEC TR 13594:1995 Information technology – Lower layers security |
| 434 | ISO 13606 Health informatics – Electronic health record communication |
| 435 | ISO 13606-1:2008 Part 1: Reference model |
| 436 | ISO 13606-2:2008 Part 2: Archetype interchange specification |
| 437 | ISO 13606-3:2009 Part 3: Reference archetypes and term lists |
| 438 | ISO/TS 13606-4:2009 Part 4: Security |
| 439 | ISO 13606-5:2010 Part 5: Interface specification |
| 440 | ISO 13611:2014 Interpreting – Guidelines for community interpreting |
| 441 | ISO/IEC 13614:1995 Information technology – Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method |
| 442 | ISO 13616 Financial services – International bank account number (IBAN) |
| 443 | ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems |
| 444 | ISO 13628-1:2005 Part 1: General requirements and recommendations |
| 445 | ISO 13628-2:2006 Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| 446 | ISO 13628-3:2000 Part 3: Through flowline (TFL) systems |
| 447 | ISO 13628-4:2010 Part 4: Subsea wellhead and tree equipment |
| 448 | ISO 13628-5:2009 Part 5: Subsea umbilicals |
| 449 | ISO 13628-6:2006 Part 6: Subsea production control systems |
| 450 | ISO 13628-7:2005 Part 7: Completion/workover riser systems |
| 451 | ISO 13628-8:2002 Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems |
| 452 | ISO 13628-9:2000 Part 9: Remotely Operated Tool (ROT) intervention systems |
| 453 | ISO 13628-10:2005 Part 10: Specification for bonded flexible pipe |
| 454 | ISO 13628-11:2007 Part 11: Flexible pipe systems for subsea and marine applications |
| 455 | ISO 13628-15:2011 Part 15: Subsea structures and manifolds |
| 456 | ISO/IEC 13642:1999 Information technology – Elements of management information related to the OSI Physical Layer |
| 457 | ISO 13653:1996 Optics and optical instruments – General optical test methods – Measurement of relative irradiance in the image field |
| 458 | ISO 13666:2012 Ophthalmic optics – Spectacle lenses – Vocabulary |
| 459 | ISO/IEC 13673:2000 Information technology – Document processing and related communication – Conformance testing for Standard Generalized Markup Language (SGML) systems |
| 460 | ISO 13687 Tourism and related services – Yacht harbours |
| 461 | ISO 13687-1:2017 Part 1: Minimum requirements for basic service level harbours |
| 462 | ISO 13687-2:2017 Part 2: Minimum requirements for intermediate service level harbours |
| 463 | ISO 13687-3:2017 Part 3: Minimum requirements for high service level harbours |
| 464 | ISO 13694:2015 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power (energy) density distribution |
| 465 | ISO 13695:2004 Optics and photonics – Lasers and laser-related equipment – Test methods for the spectral characteristics of lasers |
| 466 | ISO 13696:2002 Optics and optical instruments – Test methods for radiation scattered by optical components |
| 467 | ISO 13697:2006 Optics and photonics – Lasers and laser-related equipment – Test methods for specular reflectance and regular transmittance of optical laser components |
| 468 | ISO 13702 Petroleum and natural gas industries – Control and mitigation of fires and explosions on offshore production installations – Requirements and guidelines |
| 469 | ISO/IEC 13712 Information technology – Remote Operations |
| 470 | ISO/IEC 13712-1:1995 Concepts, model and notation |
| 471 | ISO/IEC 13712-2:1995 OSI realizations – Remote Operations Service Element (ROSE) service definition |
| 472 | ISO/IEC 13712-3:1995 OSI realizations – Remote Operations Service Element (ROSE) protocol specification |
| 473 | ISO/IEC 13714:1995 Information technology – Document processing and related communication – User interface to telephone-based services – Voice messaging applications |
| 474 | ISO 13715:2017 Technical product documentation—Edges of undefined shape—Indication and dimensioning |
| 475 | ISO 13716:1999 Dentistry — Reversible-irreversible hydrocolloid impression material systems [Withdrawn: replaced with ISO 21563] |
| 476 | ISO/IEC 13719 Information technology – Portable Common Tool Environment (PCTE) |
| 477 | ISO/IEC 13719-1:1998 Part 1: Abstract specification |
| 478 | ISO/IEC 13719-2:1998 Part 2: C programming language binding |
| 479 | ISO/IEC 13719-3:1998 Part 3: Part 3: Ada programming language binding |
| 480 | ISO/IEC 13719-4:1998 Part 4: IDL binding (Interface Definition Language) |
| 481 | ISO 13720:2010 Meat and meat products – Enumeration of presumptive Pseudomonas spp. |
| 482 | ISO 13722:2017 Microbiology of the food chain – Enumeration of Brochothrix spp. – Colony-count technique |
| 483 | ISO 13731:2001 Ergonomics of the thermal environment – Vocabulary and symbols |
| 484 | ISO 13732 Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces |
| 485 | ISO 13732-1:2006 Part 1: Hot surfaces |
| 486 | ISO/TS 13732-2:2001 Part 2: Human contact with surfaces at moderate temperature |
| 487 | ISO/IEC 13751:2001 Information technology – Programming languages, their environments and system software interfaces – Programming language Extended APL |
| 488 | ISO 13766:2006 Earth-moving machinery – Electromagnetic compatibility |
| 489 | ISO 13779 Implants for surgery – Hydroxyapatite |
| 490 | ISO 13779-2:2008 Part 2: Coatings of hydroxyapatite |
| 491 | ISO 13779-3:2008 Part 3: Chemical analysis and characterization of crystallinity and phase purity |
| 492 | ISO 13779-4:2002 Part 4: Determination of coating adhesion strength |
| 493 | ISO 13779-6:2015 Part 6: Powders |
| 494 | ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing |
| 495 | ISO 13782:1996 Implants for surgery – Metallic materials – Unalloyed tantalum for surgical implant applications |
| 496 | ISO/IEC 13800:1996 Information technology – Procedure for the registration of identifiers and attributes for volume and file structure |
| 497 | ISO 13810:2015 Tourism services – Industrial tourism – Service provision |
| 498 | ISO/TS 13811:2015 Tourism and related services – Guidelines on developing environmental specifications for accommodation establishments |
| 499 | ISO/IEC 13816:2007 Information technology – Programming languages, their environments and system software interfaces – Programming language ISLISP |
| 500 | ISO/IEC 13817 Information technology – Programming languages, their environments and system software interfaces – Vienna Development Method – Specification Language |
| 501 | ISO/IEC 13817-1:1996 Part 1: Base language |
| 502 | ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information |
| 503 | ISO/TS 13830:2013 Nanotechnologies – Guidance on voluntary labelling for consumer products containing manufactured nano-objects |
| 504 | ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance |
| 505 | ISO/IEC TR 13841:1995 Information technology – Guidance on measurement techniques for 90 mm optical disk cartridges |
| 506 | ISO/IEC 13842:1995 Information technology – 130 mm optical disk cartridges for information interchange – Capacity: 2 Gbytes per cartridge |
| 507 | ISO 13843:2017 Water quality – Requirements for establishing performance characteristics of quantitative microbiological methods |
| 508 | ISO 13849 Safety of machinery – Safety related parts of control systems |
| 509 | ISO 13850:2015 Safety of machinery – Emergency stop function – Principles for design |
| 510 | ISO 13854:2017 Safety of machinery – Minimum gaps to avoid crushing of parts of the human body |
| 511 | ISO 13855:2010 Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body |
| 512 | ISO 13860:2016 Machinery for forestry – Forwarders – Terms, definitions and commercial specifications |
| 513 | ISO 13861:2000 Machinery for forestry – Wheeled skidders – Terms, definitions and commercial specifications |
| 514 | ISO 13862:2000 Machinery for forestry – Feller-bunchers – Terms, definitions and commercial specifications |
| 515 | ISO/IEC 13863:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Path replacement additional network feature |
| 516 | ISO/IEC 13864:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Name identification supplementary services |
| 517 | ISO/IEC 13865:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Transfer supplementary service |
| 518 | ISO/IEC 13866:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call completion supplementary services |
| 519 | ISO/IEC 13868:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Name identification supplementary services |
| 520 | ISO/IEC 13869:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Transfer supplementary service |
| 521 | ISO/IEC 13870:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Completion supplementary services |
| 522 | ISO/IEC 13871:1995 Information technology – Telecommunications and information exchange between systems – Private telecommunications networks – Digital channel aggregation |
| 523 | ISO/IEC 13872:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Diversion supplementary services |
| 524 | ISO/IEC 13873:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Diversion supplementary services |
| 525 | ISO/IEC 13874:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Path Replacement additional network feature |
| 526 | ISO/IEC 13886:1996 Information technology – Language-Independent Procedure Calling (LIPC) |
| 527 | ISO/IEC 13888 Information technology – Security techniques – Non-repudiation |
| 528 | ISO/IEC 13888-1:2009 Part 1: General |
| 529 | ISO/IEC 13888-2:2010 Part 2: Mechanisms using symmetric |
| 530 | ISO/IEC 13888-3:2009 Part 3: Mechanisms using asymmetric techniques |
| 531 | ISO 13920:1996 Welding – General tolerances for welded constructions – Dimensions for lengths and angles – Shape and position |
| 532 | ISO/IEC 13923:1996 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-2 format using 120 m length tape |
| 533 | ISO 13926 Pen systems |
| 534 | ISO 13926-1:2004 Part 1: Glass cylinders for pen-injectors for medical use |
| 535 | ISO 13926-2:2011 Part 2: Plunger stoppers for pen-injectors for medical use |
| 536 | ISO 13926-3:2012 Part 3: Seals for pen-injectors for medical use |
| 537 | ISO 13940:2015 Health informatics – System of concepts to support continuity of care |
| 538 | ISO 13943:2017 Fire safety – Vocabulary |
| 539 | ISO 13958:2014 Concentrates for haemodialysis and related therapies |
| 540 | ISO 13959:2014 Water for haemodialysis and related therapies |
| 541 | ISO 13960:2010 Cardiovascular implants and extracorporeal systems – Plasmafilters |
| 542 | ISO/IEC 13961:2000 Information technology – Scalable Coherent Interface (SCI) |
| 543 | ISO/IEC 13962:1995 Information technology – Data interchange on 12,7 mm, 112-track magnetic tape cartridges – DLT 2 format |
| 544 | ISO/IEC 13963:1995 Information technology – Data interchange on 90 mm optical disk cartridges – Capacity: 230 megabytes per cartridge |
| 545 | ISO 13969:2003 Milk and milk products – Guidelines for a standardized description of microbial inhibitor tests |
| 546 | ISO 13970:2011 Recreational diving services – Requirements for the training of recreational snorkelling guides |
| 547 | ISO/TS 13972:2015 Health informatics – Detailed clinical models, characteristics and processes |
| 548 | ISO/TR 13973:2014 Artificial recharge to groundwater |
| 549 | ISO 13990 Textile machinery and accessories – Yarn feeders and yarn control for knitting machines |
| 550 | ISO 13990-1:2006 Part 1: Vocabulary |
