| # | Standards |
| 1 | ISO/IEC TR 10000 Information technology – Framework and taxonomy of International Standardized Profiles |
| 2 | ISO/IEC TR 10000-1:1998 Part 1: General principles and documentation framework |
| 3 | ISO/IEC TR 10000-2:1998 Part 2: Principles and Taxonomy for OSI Profiles |
| 4 | ISO/IEC TR 10000-3:1998 Part 3: Principles and Taxonomy for Open System Environment Profiles |
| 5 | ISO 10001:2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations |
| 6 | ISO 10002:2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations |
| 7 | ISO 10003:2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations |
| 8 | ISO 10004:2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring |
| 9 | ISO 10005:2005 Quality management systems – Guidelines for quality plans |
| 10 | ISO 10006:2003 Quality management systems – Guidelines for quality management in projects |
| 11 | ISO 10007:2017 Quality management systems – Guidelines for configuration management |
| 12 | ISO 10008:2013 Quality management – Customer satisfaction – Guidelines for business-to-consumer electronic commerce transactions |
| 13 | ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment |
| 14 | ISO/TR 10013:2001 Guidelines for quality management system documentation |
| 15 | ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits |
| 16 | ISO 10015:1999 Quality management – Guidelines for training |
| 17 | ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000 |
| 18 | ISO 10018:2012 Quality management – Guidelines on people involvement and competence |
| 19 | ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services |
| 20 | ISO/IEC 10021 Information technology – Message Handling Systems (MHS) |
| 21 | ISO/IEC 10022:1996 Information technology – Open Systems Interconnection – Physical Service Definition |
| 22 | ISO/IEC 10026 Information technology – Open Systems Interconnection – Distributed Transaction Processing |
| 23 | ISO/IEC 10026-1:1998 Part 1: OSI TP Model |
| 24 | ISO/IEC 10026-2:1998 Part 2: OSI TP Service |
| 25 | ISO/IEC 10026-3:1998 Part 3: Protocol specification |
| 26 | ISO/IEC 10026-4:1995 Protocol Implementation Conformance Statement (PICS) proforma |
| 27 | ISO/IEC 10026-5:1998 Part 5: Application context proforma and guidelines when using OSI TP |
| 28 | ISO/IEC 10026-6:1995 Part 6: Unstructured Data Transfer |
| 29 | ISO/IEC 10027:1990 Information technology – Information Resource Dictionary System (IRDS) framework |
| 30 | ISO/IEC 10028:1993 Information technology – Telecommunications and information exchange between systems – Definition of the relaying functions of a Network layer intermediate system |
| 31 | ISO/IEC 10030:1995 Information technology – Telecommunications and information exchange between systems – End System Routing Information Exchange Protocol for use in conjunction with ISO/IEC 8878 |
| 32 | ISO/IEC TR 10032:2003 Information technology – Reference Model of Data Management |
| 33 | ISO/IEC TR 10034:1990 Guidelines for the preparation of conformity clauses in programming language standards |
| 34 | ISO/IEC 10035 Information technology – Open Systems Interconnection – Connectionless protocol for the Association Control Service Element |
| 35 | ISO/IEC 10035-2:1995 Protocol Implementation Conformance Statement (PICS) proforma |
| 36 | ISO/IEC 10036:1996 Information technology – Font information interchange – Procedures for registration of font-related identifiers |
| 37 | ISO/IEC 10040:1998 Information technology – Open Systems Interconnection – Systems management overview |
| 38 | ISO 10052:2004 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method |
| 39 | ISO 10055:1996 Mechanical vibration – Vibration testing requirements for shipboard equipment and machinery components |
| 40 | ISO 10075 Ergonomic principles related to mental workload |
| 41 | ISO 10075-1:2017 Part 1: General issues and concepts, terms and definitions |
| 42 | ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance |
| 43 | ISO 10079 Medical suction equipment |
| 44 | ISO 10079-1:2015 Part 1: Electrically powered suction equipment |
| 45 | ISO 10079-2:2014 Part 2: Manually powered suction equipment |
| 46 | ISO 10079-3:2014 Part 3: Suction equipment powered from a vacuum or positive pressure gas source |
| 47 | ISO/IEC 10089:1991 Information technology – 130 mm rewritable optical disk cartridge for information interchange |
| 48 | ISO/IEC 10090:1992 Information technology – 90 mm optical disk cartridges, rewritable and read only, for data interchange |
| 49 | ISO/IEC TR 10091:1995 Information technology – Technical aspects of 130 mm optical disk cartridge write-once recording format |
| 50 | ISO 10110 Optics and photonics – Preparation of drawings for optical elements and systems[Note 3] |
| 51 | ISO 10110-1:2006 Part 1: General |
| 52 | ISO 10110-2:1996 Part 2: Material imperfections – Stress birefringence |
| 53 | ISO 10110-3:1996 Part 3: Material imperfections – Bubbles and inclusions |
| 54 | ISO 10110-4:1997 Part 4: Material imperfections – Inhomogeneity and striae |
| 55 | ISO 10110-5:2015 Part 5: Surface form tolerances |
| 56 | ISO 10110-6:2015 Part 6: Centring tolerances |
| 57 | ISO 10110-7:2017 Part 7: Surface imperfections |
| 58 | ISO 10110-8:2010 Part 8: Surface texture; roughness and waviness |
| 59 | ISO 10110-9:2016 Part 9: Surface treatment and coating |
| 60 | ISO 10110-10:2004 Part 10: Table representing data of optical elements and cemented assemblies |
| 61 | ISO 10110-11:2016 Part 11: Non-toleranced data |
| 62 | ISO 10110-12:2007 Part 12: Aspheric surfaces |
| 63 | ISO 10110-14:2007 Part 14: Wavefront deformation tolerance |
| 64 | ISO 10110-17:2004 Part 17: Laser irradiation damage threshold |
| 65 | ISO 10110-19:2015 Part 19: General description of surfaces and components |
| 66 | ISO 10112:1991 Damping materials – Graphical presentation of the complex modulus |
| 67 | ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher |
| 68 | ISO/IEC 10118 Information technology – Security techniques – Hash-functions |
| 69 | ISO/IEC 10118-1:2016 Part 1: General |
| 70 | ISO/IEC 10118-2:2010 Part 2: Hash-functions using an n-bit block cipher |
| 71 | ISO/IEC 10118-3:2004 Part 3: Dedicated hash-functions |
| 72 | ISO/IEC 10118-4:1998 Part 4: Hash-functions using modular arithmetic |
| 73 | ISO 10132:1993 Textiles – Textured filament yarn – Definitions |
| 74 | ISO 10135:2007 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD) |
| 75 | ISO/IEC 10149:1995 Information technology – Data interchange on read-only 120 mm optical data disks (CD-ROM) |
| 76 | ISO 10159:2011 Health informatics – Messages and communication – Web access reference manifest |
| 77 | ISO 10160:2015 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition |
| 78 | ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification |
| 79 | ISO 10161-1:2014 Part 1: Protocol specification |
| 80 | ISO 10161-2:2014 Part 2: Protocol implementation conformance statement (PICS) proforma |
| 81 | ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management |
| 82 | ISO/IEC 10164-1:1993 Object Management Function |
| 83 | ISO/IEC 10164-2:1993 State Management Function |
| 84 | ISO/IEC 10164-3:1993 Attributes for representing relationships |
| 85 | ISO/IEC 10164-4:1992 Alarm reporting function |
| 86 | ISO/IEC 10164-5:1993 Event Report Management Function |
| 87 | ISO/IEC 10164-6:1993 Log control function |
| 88 | ISO/IEC 10164-7:1992 Security alarm reporting function |
| 89 | ISO/IEC 10164-8:1993 Security audit trail function |
| 90 | ISO/IEC 10164-9:1995 Objects and attributes for access control |
| 91 | ISO/IEC 10164-10:1995 Usage metering function for accounting purposes |
| 92 | ISO/IEC 10164-11:1994 Metric objects and attributes |
| 93 | ISO/IEC 10164-12:1994 Test Management Function |
| 94 | ISO/IEC 10164-13:1995 Summarization Function |
| 95 | ISO/IEC 10164-14:1996 Confidence and diagnostic test categories |
| 96 | ISO/IEC 10164-15:2002 Scheduling function |
| 97 | ISO/IEC 10164-16:1997 Management knowledge management function |
| 98 | ISO/IEC 10164-17:1996 Change over function |
| 99 | ISO/IEC 10164-18:1997 Software management function |
| 100 | ISO/IEC 10164-19:1998 Management domain and management policy management function |
| 101 | ISO/IEC 10164-20:1999 Time management function |
| 102 | ISO/IEC 10164-21:1998 Command sequencer for Systems Managenment |
| 103 | ISO/IEC 10164-22:2000 Response time monitoring |
| 104 | ISO/IEC 10165 Information technology – Open Systems Interconnection – Structure of management information[Note 3] |
| 105 | ISO/IEC 10165-1:1993 Management Information Model |
| 106 | ISO/IEC 10165-2:1992 Definition of management information |
| 107 | ISO/IEC 10165-4:1992 Part 4: Guidelines for the definition of managed objects |
| 108 | ISO/IEC 10165-5:1994 Generic management information |
| 109 | ISO/IEC 10165-6:1997 Requirements and guidelines for implementation conformance statement proformas associated with OSI management |
| 110 | ISO/IEC 10165-7:1996 General relationship model |
| 111 | ISO/IEC 10165-8:2000 Managed objects for supporting upper layers |
| 112 | ISO/IEC 10165-9:2000 Systems management application layer managed objects |
| 113 | ISO/IEC 10166 Information technology – Text and office systems – Document Filing and Retrieval (DFR) |
| 114 | ISO/IEC 10166-1:1991 Part 1: Abstract service definition and procedures |
| 115 | ISO/IEC 10166-2:1991 Part 2: Protocol specification |
| 116 | ISO/IEC TR 10171:2000 Information technology – Telecommunications and information exchange between systems – List of standard data link layer protocols that utilize high-level data link control (HDLC) classes of procedures, list of standard XID format identifiers, list of standard mode-setting information field format identifiers, and list of standard user-defined parameter set identification values |
| 117 | ISO/IEC 10173:1998 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T |
| 118 | ISO/IEC 10175 Information technology – Text and office systems – Document Printing Application (DPA) |
| 119 | ISO/IEC 10175-1:1996 Part 1: Abstract service definition and procedures |
| 120 | ISO/IEC 10175-2:1996 Part 2: Protocol specification |
| 121 | ISO/IEC 10175-3:2000 Part 3: Management abstract service definitions and procedures |
| 122 | ISO/IEC TR 10176:2003 Information technology – Guidelines for the preparation of programming language standards |
| 123 | ISO/IEC 10177:1993 Information technology – Telecommunications and information exchange between systems – Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol |
| 124 | ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL) |
| 125 | ISO/IEC 10180:1995 Information technology – Processing languages – Standard Page Description Language (SPDL) |
| 126 | ISO/IEC 10181 Information technology – Open Systems Interconnection – Security frameworks for open systems |
| 127 | ISO/IEC 10181-1:1996 Overview |
| 128 | ISO/IEC 10181-2:1996 Authentication framework |
| 129 | ISO/IEC 10181-3:1996 Access control framework |
| 130 | ISO/IEC 10181-4:1997 Non-repudiation framework |
| 131 | ISO/IEC 10181-5:1996 Confidentiality framework |
| 132 | ISO/IEC 10181-6:1996 Integrity framework |
| 133 | ISO/IEC 10181-7:1996 Security audit and alarms framework |
| 134 | ISO/IEC TR 10182:2016 Information technology – Programming languages, their environments and system software interfaces – Guidelines for language bindings |
| 135 | ISO/IEC TR 10183 Information technology – Text and office systems – Office Document Architecture (ODA) and interchange format – Technical Report on ISO 8613 implementation testing |
| 136 | ISO/IEC TR 10183-1:1993 Part 1: Testing methodology |
| 137 | ISO/IEC TR 10183-2:1993 Part 2: Framework for abstract test cases |
| 138 | ISO/IEC 10192 Information technology – Home Electronic System (HES) interfaces |
| 139 | ISO/IEC 10192-1:2002 Part 1: Universal Interface (UI) Class 1 |
| 140 | ISO/IEC TR 10192-2:2000 Part 2: Simple Interfaces Type 1 |
| 141 | ISO/IEC 10206:1991 Information technology – Programming languages – Extended Pascal |
| 142 | ISO 10209:2012 Technical product documentation – Vocabulary – Terms relating to technical drawings, product definition and related documentation |
| 143 | ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations |
| 144 | ISO 10218 Robots and robotic devices – Safety requirements for industrial robots |
| 145 | ISO 10241 Terminological entries in standards |
| 146 | ISO 10241-1:2011 Part 1: General requirements and examples of presentation |
| 147 | ISO 10241-2:2012 Part 2: Adoption of standardized terminological entries |
| 148 | ISO 10243:2010 Tools for pressing – Compression springs with rectangular section – Housing dimensions and colour coding |
| 149 | ISO 10244:2010 Document management – Business process baselining and analysis |
| 150 | ISO 10254:2016 Air cargo and ground equipment – Vocabulary |
| 151 | ISO/TR 10255:2009 Document management applications – Optical disk storage technology, management and standards |
| 152 | ISO 10263 Earth-moving machinery – Operator enclosure environment |
| 153 | ISO 10263-1:2009 Part 1: Terms and definitions |
| 154 | ISO 10265:2008 Earth-moving machinery – Crawler machines – Performance requirements and test procedures for braking systems |
| 155 | ISO 10272 Microbiology of the food chain – Horizontal method for detection and enumeration of Campylobacter spp. |
| 156 | ISO 10272-1:2017 Part 1: Detection method |
| 157 | ISO 10272-2:2017 Part 2: Colony-count technique |
| 158 | ISO 10273:2017 Microbiology of the food chain – Horizontal method for the detection of pathogenic Yersinia enterocolitica |
| 159 | ISO/IEC 10279:1991 Information technology – Programming languages – Full BASIC |
| 160 | ISO 10284:1997 Cinematography – Graphical symbols – Description |
| 161 | ISO 10286:2015 Gas cylinders – Terminology |
| 162 | ISO 10302 Acoustics – Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices |
| 163 | ISO 10302-1:2011 Part 1: Airborne noise measurement |
| 164 | ISO 10302-2:2011 Part 2: Structure-borne vibration measurements |
| 165 | ISO 10303 Industrial automation systems and integration – Product data representation and exchange |
| 166 | ISO 10316:1990 Shipbuilding — Class B magnetic compasses — Tests and certification [Withdrawn: replaced by ISO 25862] |
| 167 | ISO 10318 Geosynthetics |
| 168 | ISO 10318-1:2015 Part 1: Terms and definitions |
| 169 | ISO 10318-2:2015 Part 2: Symbols and pictograms |
| 170 | ISO 10322 Ophthalmic optics – Semi-finished spectacle lens blanks |
| 171 | ISO 10322-1:2016 Part 1: Specifications for single-vision and multifocal lens blanks |
| 172 | ISO 10322-2:2016 Part 2: Specifications for progressive-power and degressive-power lens blanks |
| 173 | ISO 10324:1997 Information and documentation – Holdings statements – Summary level |
| 174 | ISO 10328:2016 Prosthetics – Structural testing of lower-limb prostheses – Requirements and test methods |
| 175 | ISO 10334:1994 Implants for surgery – Malleable wires for use as sutures and other surgical applications |
| 176 | ISO 10341:2012 Ophthalmic instruments – Refractor heads |
| 177 | ISO 10342:2010 Ophthalmic instruments – Eye refractometers |
| 178 | ISO 10343:2014 Ophthalmic instruments – Ophthalmometers |
| 179 | ISO 10360 Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring systems (CMS)[Note 3] |
| 180 | ISO 10360-1:2000 Part 1: Vocabulary |
| 181 | ISO 10360-2:2009 Part 2: CMMs used for measuring linear dimensions |
| 182 | ISO 10360-3:2000 Part 3: CMMs with the axis of a rotary table as the fourth axis |
| 183 | ISO 10360-4:2000 Part 4: CMMs used in scanning measuring mode |
| 184 | ISO 10360-5:2010 Part 5: CMMs using single and multiple stylus contacting probing systems |
| 185 | ISO 10360-6:2001 Part 6: Estimation of errors in computing Gaussian associated features |
| 186 | ISO 10360-7:2011 Part 7: CMMs equipped with imaging probing systems |
| 187 | ISO 10360-8:2013 Part 8: CMMs with optical distance sensors |
| 188 | ISO 10360-9:2013 Part 9: CMMs with multiple probing systems |
| 189 | ISO 10360-10:2016 Part 10: Laser trackers for measuring point-to-point distances |
| 190 | ISO 10360-12:2016 Part 12: Articulated arm coordinate measurement machines (CMM) |
| 191 | ISO/IEC 10367:1991 Information technology – Standardized coded graphic character sets for use in 8-bit codes |
| 192 | ISO/IEC 10373 Identification cards – Test methods |
| 193 | ISO/IEC 10373-1:2006 Part 1: General characteristics |
| 194 | ISO/IEC 10373-2:2015 Part 2: Cards with magnetic stripes |
| 195 | ISO/IEC 10373-3:2010 Part 3: Integrated circuit cards with contacts and related interface devices |
| 196 | ISO/IEC 10373-5:2014 Part 5: Optical memory cards |
| 197 | ISO/IEC 10373-6:2016 Part 6: Proximity cards |
| 198 | ISO/IEC 10373-7:2008 Part 7: Vicinity cards |
| 199 | ISO/IEC 10373-8:2011 Part 8: USB-ICC |
| 200 | ISO/IEC 10373-9:2011 Part 9: Optical memory cards – Holographic recording method |
| 201 | ISO 10377:2013 Consumer product safety – Guidelines for suppliers |
| 202 | ISO 10380 Pipework — Corrugated metal hoses and hose assemblies |
| 203 | ISO 10383:2012 Securities and related financial instruments – Codes for exchanges and market identification (MIC) |
| 204 | ISO 10386:1994 Ferroboron – Specification and conditions of delivery |
| 205 | ISO 10387:1994 Metal chrome – Specification and conditions of delivery |
| 206 | ISO 10393:2013 Consumer product recall – Guidelines for suppliers |
| 207 | ISO 10456 Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values |
| 208 | ISO 10487 Passenger cars – Connections for car radios[Note 3] |
| 209 | ISO 10494:1993 Gas turbines and gas turbine sets – Measurement of emitted airborne noise – Engineering/survey method |
| 210 | ISO/IEC 10514 Information technology – Programming languages |
| 211 | ISO/IEC 10514-1:1996 Part 1: Modula-2, Base Language |
| 212 | ISO/IEC 10514-2:1998 Part 2: Generics Modula-2 |
| 213 | ISO/IEC 10514-3:1998 Part 3: Object Oriented Modula-2 |
| 214 | ISO 10524 Pressure regulators for use with medical gases |
| 215 | ISO 10524-1:2006 Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| 216 | ISO 10524-2:2005 Part 2: Manifold and line pressure regulators |
| 217 | ISO 10524-3:2005 Part 3: Pressure regulators integrated with cylinder valves |
| 218 | ISO 10524-4:2008 Part 4: Low-pressure regulators |
| 219 | ISO 10534 Acoustics – Determination of sound absorption coefficient and impedance in impedance tubes |
| 220 | ISO 10534-1:1996 Part 1: Method using standing wave ratio |
| 221 | ISO 10534-2:1998 Part 2: Transfer-function method |
| 222 | ISO/IEC 10536 Identification cards – Contactless integrated circuit(s) cards – Close-coupled cards[Note 3] |
| 223 | ISO/IEC 10536-1:2000 Part 1: Physical characteristics |
| 224 | ISO/IEC 10536-2:1995 Part 2: Dimensions and location of coupling areas |
| 225 | ISO/IEC 10536-3:1996 Part 3: Electronic signals and reset procedures |
| 226 | ISO/IEC 10538:1991 Information technology – Control functions for text communication |
| 227 | ISO 10555 Intravascular catheters – Sterile and single-use catheters |
| 228 | ISO 10555-1:2013 Part 1: General requirements |
| 229 | ISO 10555-3:2013 Part 3: Central venous catheters |
| 230 | ISO 10555-4:2013 Part 4: Balloon dilatation catheters |
| 231 | ISO 10555-5:2013 Part 5: Over-needle peripheral catheters |
| 232 | ISO 10555-6:2015 Part 6: Subcutaneous implanted ports |
| 233 | ISO/IEC 10561:1999 Information technology – Office equipment – Printing devices – Method for measuring throughput – Class 1 and Class 2 printers |
| 234 | ISO 10567:2007 Earth-moving machinery – Hydraulic excavators – Lift capacity |
| 235 | ISO 10576 Statistical methods – Guidelines for the evaluation of conformity with specified requirements |
| 236 | ISO 10576-1:2003 Part 1: General principles |
| 237 | ISO 10579:2010 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts |
| 238 | ISO 10585:1996 Information and documentation – Armenian alphabet coded character set for bibliographic information interchange |
| 239 | ISO 10586:1996 Information and documentation – Georgian alphabet coded character set for bibliographic information interchange |
| 240 | ISO/IEC 10588:1993 Information technology – Use of X.25 Packet Layer Protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode Network Service |
| 241 | ISO/IEC 10589:2002 Information technology – Telecommunications and information exchange between systems – Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473) |
| 242 | ISO 10625:2005 Equipment for crop protection – Sprayer nozzles – Colour coding for identification |
| 243 | ISO 10628 Flow diagrams for process plants |
| 244 | ISO/IEC 10641:1993 Information technology – Computer graphics and image processing – Conformance testing of implementations of graphics standards |
| 245 | ISO/IEC 10646:2020 Information technology — Universal Coded Character Set (UCS) |
| 246 | ISO 10651 Lung ventilators for medical use – Particular requirements for basic safety and essential performance[Note 3] |
| 247 | ISO 10651-1:1993 Part 1: Requirements |
| 248 | ISO 10651-2:1996 Part 2: Particular requirements for home care ventilators |
| 249 | ISO 10651-3:1997 Part 3: Particular requirements for emergency and transport ventilators |
| 250 | ISO 10651-4:2002 Part 4: Particular requirements for operator-powered resuscitators |
| 251 | ISO 10651-5:2006 Part 5: Gas-powered emergency resuscitators |
| 252 | ISO 10651-6:2004 Part 6: Home-care ventilatory support devices |
| 253 | ISO 10656:2016 Resistance welding equipment – Transformers – Integrated transformers for welding guns |
| 254 | ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head |
| 255 | ISO 10667 Assessment service delivery – Procedures and methods to assess people in work and organizational settings |
| 256 | ISO 10667-1:2011 Part 1: Requirements for the client |
| 257 | ISO 10667-2:2011 Part 2: Requirements for service providers |
| 258 | ISO 10668:2010 Brand valuation – Requirements for monetary brand valuation |
| 259 | ISO 10685 Ophthalmic optics – Spectacle frames and sunglasses electronic catalogue and identification |
| 260 | ISO 10685-1:2011 Part 1: Product identification and electronic catalogue product hierarchy |
| 261 | ISO 10685-2:2016 Part 2: Commercial information |
| 262 | ISO 10685-3:2012 Part 3: Technical information |
| 263 | ISO 10703:2007 Water quality – Determination of the activity concentration of radionuclides – Method by high resolution gamma-ray spectrometry |
| 264 | ISO 10705 Water quality – Detection and enumeration of bacteriophages |
| 265 | ISO 10705-1:1995 Part 1: Enumeration of F-specific RNA bacteriophages |
| 266 | ISO 10705-2:2000 Part 2: Enumeration of somatic coliphages |
| 267 | ISO 10705-3:2003 Part 3: Validation of methods for concentration of bacteriophages from water |
| 268 | ISO 10705-4:2001 Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis |
| 269 | ISO 10711:2012 Intelligent Transport Systems – Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors |
| 270 | ISO 10718:2015 Cork stoppers – Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium |
| 271 | ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials |
| 272 | ISO/IEC 10728:1993 Information technology – Information Resource Dictionary System (IRDS) Services Interface |
| 273 | ISO/IEC 10731:1994 Information technology – Open Systems Interconnection – Basic Reference Model – Conventions for the definition of OSI services |
| 274 | ISO/IEC 10732:1993 Information technology – Use of X.25 Packet Layer Protocol to provide the OSI connection-mode Network Service over the telephone network |
| 275 | ISO/IEC 10733:1998 Information technology – Elements of management information related to the OSI Network Layer |
| 276 | ISO/IEC 10736:1995 Information technology – Telecommunications and information exchange between systems – Transport layer security protocol |
| 277 | ISO/IEC 10737:1998 Information technology – Elements of management information related to OSI Transport layer |
| 278 | ISO/IEC 10741 Information technology – User system interfaces – Dialogue interaction |
| 279 | ISO/IEC 10741-1:1995 Part 1: Cursor control for text editing |
| 280 | ISO/IEC 10742:1994 Information technology – Telecommunications and information exchange between systems – Elements of management information related to OSI Data Link Layer standards |
| 281 | ISO/IEC 10744:1997 Information technology – Hypermedia/Time-based Structuring Language (HyTime) |
| 282 | ISO/IEC 10745:1995 Information technology – Open Systems Interconnection – Upper layers security model |
| 283 | ISO/IEC 10746 Information technology—Open Distributed Processing—Reference model |
| 284 | ISO/IEC 10746-1:1998 Overview |
| 285 | ISO/IEC 10746-2:2009 Foundations |
| 286 | ISO/IEC 10746-3:2009 Architecture |
| 287 | ISO/IEC 10746-4:1998 Architectural semantics |
| 288 | ISO/IEC 10747:1994 Information technology – Telecommunications and information exchange between systems – Protocol for exchange of inter-domain routeing information among intermediate systems to support forwarding of ISO 8473 PDUs |
| 289 | ISO 10754:1996 Information and documentation – Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange |
| 290 | ISO/IEC 10779:2008 Information technology – Office equipment accessibility guidelines for elderly persons and persons with disabilities |
| 291 | ISO/HL7 10781:2015 Health Informatics – HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM) |
| 292 | ISO 10782 Definitions and attributes of data elements for control and monitoring of textile processes |
| 293 | ISO 10782-1:1998 Part 1: Spinning, spinning preparatory and related processes |
| 294 | ISO 10790:2015 Measurement of fluid flow in closed conduits – Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
| 295 | ISO 10795:2011 Space systems – Programme management and quality – Vocabulary |
| 296 | ISO/TS 10797:2012 Nanotechnologies – Characterization of single-wall carbon nanotubes using transmission electron microscopy |
| 297 | ISO/TS 10798:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis |
| 298 | ISO 10801:2010 Nanotechnologies – Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method |
| 299 | ISO 10807:1994 Pipework – Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres |
| 300 | ISO 10808:2010 Nanotechnologies – Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing |
| 301 | ISO/TS 10811 Mechanical vibration and shock – Vibration and shock in buildings with sensitive equipment |
| 302 | ISO/TS 10811-1:2000 Part 1: Measurement and evaluation |
| 303 | ISO/TS 10811-2:2000 Part 2: Classification |
| 304 | ISO 10813 Vibration generating machines – Guidance for selection |
| 305 | ISO 10813-1:2004 Part 1: Equipment for environmental testing |
| 306 | ISO 10815:2016 Mechanical vibration – Measurement of vibration generated internally in railway tunnels by the passage of trains |
| 307 | ISO 10816 Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts |
| 308 | ISO 10816-1:1995 Part 1: General guidelines |
| 309 | ISO 10816-2:2009 Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| 310 | ISO 10816-3:2009 Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ |
| 311 | ISO 10816-4:2009 Part 4: Gas turbine sets with fluid-film bearings |
| 312 | ISO 10816-5:2000 Part 5: Machine sets in hydraulic power generating and pumping plants |
| 313 | ISO 10816-6:1995 Part 6: Reciprocating machines with power ratings above 100 kW |
| 314 | ISO 10816-7:2009 Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| 315 | ISO 10816-8:2014 Part 8: Reciprocating compressor systems |
| 316 | ISO 10816-21:2015 Part 21: Horizontal axis wind turbines with gearbox |
| 317 | ISO 10817 Rotating shaft vibration measuring systems |
| 318 | ISO 10817-1:1998 Part 1: Relative and absolute sensing of radial vibration |
| 319 | ISO 10825:1995 Gears – Wear and damage to gear teeth – Terminology |
| 320 | ISO 10843:1997 Acoustics – Methods for the description and physical measurement of single impulses or series of impulses |
| 321 | ISO 10844:2014 Acoustics – Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| 322 | ISO 10846 Acoustics and vibration – Laboratory measurement of vibro-acoustic transfer properties of resilient elements |
| 323 | ISO 10846-1:2008 Part 1: Principles and guidelines |
| 324 | ISO 10846-2:2008 Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| 325 | ISO 10846-3:2002 Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
| 326 | ISO 10846-4:2003 Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| 327 | ISO 10846-5:2008 Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| 328 | ISO 10847:1997 Acoustics – In-situ determination of insertion loss of outdoor noise barriers of all types |
| 329 | ISO/IEC 10859:1997 Information technology – 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers |
| 330 | ISO/IEC 10861:1994 Information technology – Microprocessor systems – High-performance synchronous 32-bit bus: MULTIBUS II |
| 331 | ISO/TS 10867:2010 Nanotechnologies – Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy |
| 332 | ISO/TS 10868:2017 Nanotechnologies – Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy |
| 333 | ISO 10878:2013 Non-destructive testing – Infrared thermography – Vocabulary |
| 334 | ISO/IEC 10885:1993 Information technology – 356 mm optical disk cartridge for information interchange – Write once |
| 335 | ISO/IEC 10918 Information technology – Digital compression and coding of continuous-tone still images |
| 336 | ISO/TR 10929:2012 Nanotechnologies – Characterization of multiwall carbon nanotube (MWCNT) samples |
| 337 | ISO 10934 Optics and optical instruments – Vocabulary for microscopy |
| 338 | ISO 10934-1:2002 Part 1: Light microscopy |
| 339 | ISO 10934-2:2007 Part 2: Advanced techniques in light microscopy |
| 340 | ISO 10936 Optics and photonics – Operation microscopes |
| 341 | ISO 10936-1:2017 Part 1: Requirements and test methods |
| 342 | ISO 10936-2:2010 Part 2: Light hazard from operation microscopes used in ocular surgery |
| 343 | ISO 10938:2016 Ophthalmic optics – Chart displays for visual acuity measurement – Printed, projected and electronic |
| 344 | ISO 10939:2017 Ophthalmic instruments – Slit-lamp microscopes |
| 345 | ISO 10940:2009 Ophthalmic instruments – Fundus cameras |
| 346 | ISO 10942:2006 Ophthalmic instruments – Direct ophthalmoscopes |
| 347 | ISO 10943:2011 Ophthalmic instruments – Indirect ophthalmoscopes |
| 348 | ISO 10944:2009 Ophthalmic instruments – Synoptophores |
| 349 | ISO 10957:2009 Information and documentation – International standard music number (ISMN) |
| 350 | ISO 10962:2015 Securities and related financial instruments – Classification of financial instruments (CFI code) |
| 351 | ISO/IEC 10967 Information technology – Language independent arithmetic |
| 352 | ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device |
| 353 | ISO 10985:2009 Caps made of aluminium-plastics combinations for infusion bottles and injection vials – Requirements and test methods |
| 354 | ISO 10991:2009 Micro process engineering – Vocabulary |
| 355 | ISO/TR 10992:2011 Intelligent transport systems – Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles |
| 356 | ISO 10993 Biological evaluation of medical devices |
| 357 | ISO/IEC 10994:1992 Information technology – Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side – ISO Type 303 |
| 358 | ISO/IEC 10995:2011 Information technology – Digitally recorded media for information interchange and storage – Test method for the estimation of the archival lifetime of optical media |
| 359 | ISO/IEC 11002:2008 Information technology – Multipath management API |
| 360 | ISO 11005:2010 Technical product documentation – Use of main documents |
| 361 | ISO 11011:2013 Compressed air – Energy efficiency – Assessment[3] |
| 362 | ISO 11014:2009 Safety data sheet for chemical products – Content and order of sections |
| 363 | ISO/IEC TR 11017:1998 Information technology – Framework for internationalization |
| 364 | ISO 11040 Prefilled syringes |
| 365 | ISO 11040-1:2015 Part 1: Glass cylinders for dental local anaesthetic cartridges |
| 366 | ISO 11040-2:2011 Part 2: Plunger stoppers for dental local anaesthetic cartridges |
| 367 | ISO 11040-3:2012 Part 3: Seals for dental local anaesthetic cartridges |
| 368 | ISO 11040-4:2015 Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| 369 | ISO 11040-5:2012 Part 5: Plunger stoppers for injectables |
| 370 | ISO 11040-6:2012 Part 6: Plastic barrels for injectables |
| 371 | ISO 11040-7:2015 Part 7: Packaging systems for sterilized subassembled syringes ready for filling |
| 372 | ISO 11040-8:2016 Part 8: Requirements and test methods for finished prefilled syringes |
| 373 | ISO 11064 Ergonomic design of control centres |
| 374 | ISO 11064-1:2000 Principles for the design of control centres |
| 375 | ISO 11064-2:2000 Principles for the arrangement of control suites |
| 376 | ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002 |
| 377 | ISO 11064-4:2013 Layout and dimensions of workstations |
| 378 | ISO 11064-5:2008 Displays and controls |
| 379 | ISO 11064-6:2005 Environmental requirements for control centres |
| 380 | ISO 11064-7:2006 Principles for the evaluation of control centres |
| 381 | ISO/TR 11065:1992 Industrial automation glossary |
| 382 | ISO 11067:2015 Intelligent transport systems – Curve speed warning systems (CSWS) – Performance requirements and test procedures |
| 383 | ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires |
| 384 | ISO/IEC 11072:1992 Information technology – Computer graphics – Computer Graphics Reference Model |
| 385 | ISO/IEEE 11073 Health informatics – Point-of-care medical device communication |
| 386 | ISO 11074:2015 Soil quality – Vocabulary |
| 387 | ISO 11086:1996 Gas turbines – Vocabulary |
| 388 | ISO 11091:1994 Construction drawings – Landscape drawing practice |
| 389 | ISO 11095:1996 Linear calibration using reference materials |
| 390 | ISO 11107:2009 Recreational diving services – Requirements for training programmes on enriched air nitrox (EAN) diving |
| 391 | ISO 11108:1996 Information and documentation – Archival paper – Requirements for permanence and durability |
| 392 | ISO 11117:2008 Gas cylinders – Valve protection caps and valve guards – Design, construction and tests |
| 393 | ISO 11120 Gas cylinders – Refillable seamless steel tubes of water capacity between 150 L and 3000 L – Design, construction and testing |
| 394 | ISO 11121:2017 Recreational diving services – Requirements for introductory programmes to scuba diving |
| 395 | ISO 11124 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives |
| 396 | ISO 11124-1:1993 Part 1: General introduction and classification |
| 397 | ISO 11124-2:1993 Part 2: Chilled-iron grit |
| 398 | ISO 11124-3:1993 Part 3: High-carbon cast-steel shot and grit |
| 399 | ISO 11124-4:1993 Part 4: Low-carbon cast-steel shot |
| 400 | ISO 11125 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives |
| 401 | ISO 11125-1:1993 Part 1: Sampling |
| 402 | ISO 11125-2:1993 Part 2: Determination of particle size distribution |
| 403 | ISO 11125-3:1993 Part 3: Determination of hardness |
| 404 | ISO 11125-4:1993 Part 4: Determination of apparent density |
| 405 | ISO 11125-5:1993 Part 5: Determination of percentage defective particles and of microstructure |
| 406 | ISO 11125-6:1993 Part 6: Determination of foreign matter |
| 407 | ISO 11125-7:1993 Part 7: Determination of moisture |
| 408 | ISO 11126 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives |
| 409 | ISO 11126-1:1993 Part 1: General introduction and classification |
| 410 | ISO 11126-3:1993 Part 3: Copper refinery slag |
| 411 | ISO 11126-4:1993 Part 4: Coal furnace slag |
| 412 | ISO 11126-5:1993 Part 5: Nickel refinery slag |
| 413 | ISO 11126-6:1993 Part 6: Iron furnace slag |
| 414 | ISO 11126-7:1995 Part 7: Fused aluminium oxide |
| 415 | ISO 11126-8:1993 Part 8: Olivine sand |
| 416 | ISO 11126-9:1999 Part 9: Staurolite |
| 417 | ISO 11126-10:2000 Part 10: Almandite garnet |
| 418 | ISO 11127 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives |
| 419 | ISO 11127-1:2011 Part 1: Sampling |
| 420 | ISO 11127-2:2011 Part 2: Determination of particle size distribution |
| 421 | ISO 11127-3:2011 Part 3: Determination of apparent density |
| 422 | ISO 11127-4:2011 Part 4: Assessment of hardness by a glass slide test |
| 423 | ISO 11127-5:2011 Part 5: Determination of moisture |
| 424 | ISO 11127-6:2011 Part 6: Determination of water-soluble contaminants by conductivity measurement |
| 425 | ISO 11127-7:2011 Part 7: Determination of water-soluble chlorides |
| 426 | ISO 11133:2014 Microbiology of food, animal feed and water – Preparation, production, storage and performance testing of culture media |
| 427 | ISO 11135:2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 428 | ISO 11137 Sterilization of health care products – Radiation |
| 429 | ISO 11138 Sterilization of health care products – Biological indicators |
| 430 | ISO 11138-1:2017 Part 1: General requirements |
| 431 | ISO 11138-2:2017 Part 2: Biological indicators for ethylene oxide sterilization processes |
| 432 | ISO 11138-3:2017 Part 3: Biological indicators for moist heat sterilization processes |
| 433 | ISO 11138-4:2017 Part 4: Biological indicators for dry heat sterilization processes |
| 434 | ISO 11138-5:2017 Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes |
| 435 | ISO/TS 11139:2006 Sterilization of health care products – Vocabulary |
| 436 | ISO 11145:2016 Optics and photonics – Lasers and laser-related equipment – Vocabulary and symbols |
| 437 | ISO 11146 Lasers and laser-related equipment – Test methods for laser beam widths, divergence angles and beam propagation ratios |
| 438 | ISO 11146-1:2005 Part 1: Stigmatic and simple astigmatic beams |
| 439 | ISO 11146-2:2005 Part 2: General astigmatic beams |
| 440 | ISO/TR 11146-3:2004 Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods |
| 441 | ISO 11151 Lasers and laser-related equipment – Standard optical components |
| 442 | ISO 11151-1:2015 Part 1: Components for the UV, visible and near-infrared spectral ranges |
| 443 | ISO 11151-2:2015 Part 2: Components for the infrared spectral range |
| 444 | ISO 11156:2011 Packaging – Accessible design – General requirements |
| 445 | ISO/IEC 11160 Information technology – Office equipment – Minimum information to be included in specification sheets – Printers |
| 446 | ISO/IEC 11160-1:1996 Part 1: Class 1 and Class 2 printers |
| 447 | ISO/IEC 11160-2:2013 Part 2: Class 3 and Class 4 printers |
| 448 | ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics |
| 449 | ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids |
| 450 | ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s |
| 451 | ISO/IEC 11179 Information technology – Metadata registries (MDR) |
| 452 | ISO 11192:2005 Small craft – Graphical symbols |
| 453 | ISO 11195:1995 Gas mixers for medical use – Stand-alone gas mixers |
| 454 | ISO 11197:2016 Medical supply units |
| 455 | ISO 11200:2014 Acoustics – Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| 456 | ISO 11201:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| 457 | ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| 458 | ISO 11203:1995 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| 459 | ISO 11204:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| 460 | ISO 11205:2003 Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| 461 | ISO/TR 11219:2012 Information and documentation – Qualitative conditions and basic statistics for library buildings – Space, function and design |
| 462 | ISO 11224:2003 Textiles – Web formation and bonding in nonwovens – Vocabulary |
| 463 | ISO 11238:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on substances |
| 464 | ISO 11239:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging |
| 465 | ISO 11240:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of units of measurement |
| 466 | ISO/TS 11251:2010 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry |
| 467 | ISO 11252:2013 Lasers and laser-related equipment – Laser device – Minimum requirements for documentation |
| 468 | ISO 11270:2014 Intelligent transport systems – Lane keeping assistance systems (LKAS) – Performance requirements and test procedures |
| 469 | ISO 11290 Microbiology of the food chain – Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. |
| 470 | ISO 11290-1:2017 Part 1: Detection method |
| 471 | ISO 11290-2:2017 Part 2: Enumeration method |
| 472 | ISO/TS 11308:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using thermogravimetric analysis |
| 473 | ISO 11318:2002 Cardiac defibrillators – Connector assembly DF-1 for implantable defibrillators – Dimensions and test requirements |
| 474 | ISO/IEC 11319:1993 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording |
| 475 | ISO/IEC 11321:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT format |
| 476 | ISO 11323:2010 Iron ore and direct reduced iron – Vocabulary |
| 477 | ISO/TR 11328:1994 Measurement of liquid flow in open channels – Equipment for the measurement of discharge under ice conditions |
| 478 | ISO 11329:2001 Hydrometric determinations – Measurement of suspended sediment transport in tidal channels |
| 479 | ISO 11357 Plastics – Differential scanning calorimetry (DSC) |
| 480 | ISO 11357-1:2009 General principles |
| 481 | ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height |
| 482 | ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization |
| 483 | ISO 11357-4:2005 Determination of specific heat capacity |
| 484 | ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion |
| 485 | ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
| 486 | ISO 11357-7:2002 Determination of crystallization kinetics |
| 487 | ISO/TR 11360:2010 Nanotechnologies – Methodology for the classification and categorization of nanomaterials |
| 488 | ISO 11375:1998 Building construction machinery and equipment – Terms and definitions |
| 489 | ISO 11380:1994 Optics and optical instruments – Ophthalmic optics – Formers |
| 490 | ISO 11381:2016 Ophthalmic optics – Spectacle frames – Screw threads |
| 491 | ISO 11400:1992 Nickel, ferronickel and nickel alloys – Determination of phosphorus content – Phosphovanadomolybdate molecular absorption spectrometric method |
| 492 | ISO/IEC 11404:2007 Information technology – General-Purpose Datatypes (GPD) |
| 493 | ISO/IEC 11411:1995 Information technology – Representation for human communication of state transition of software |
| 494 | ISO 11418 Containers and accessories for pharmaceutical preparations |
| 495 | ISO 11418-1:2016 Part 1: Drop-dispensing glass bottles |
| 496 | ISO 11418-2:2016 Part 2: Screw-neck glass bottles for syrups |
| 497 | ISO 11418-3:2016 Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms |
| 498 | ISO 11418-5:2015 Part 5: Dropper assemblies |
| 499 | ISO 11418-7:2016 Part 7: Screw-neck vials made of glass tubing for liquid dosage forms |
| 500 | ISO 11421:1997 Optics and optical instruments – Accuracy of optical transfer function (OTF) measurement |
| 501 | ISO 11442:2006 Technical product documentation – Document management |
| 502 | ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage |
| 503 | ISO 11450:1999 Equipment for harvesting and conservation – Round balers – Terminology and commercial specifications |
| 504 | ISO 11451 Road vehicles – Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy |
| 505 | ISO 11451-1:2015 Part 1: General principles and terminology |
| 506 | ISO 11451-2:2015 Part 2: Off-vehicle radiation sources |
| 507 | ISO 11451-3:2015 Part 3: On-board transmitter simulation |
| 508 | ISO 11451-4:2013 Part 4: Bulk current injection (BCI) |
| 509 | ISO 11452 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy |
| 510 | ISO 11452-1:2015 Part 1: General principles and terminology |
| 511 | ISO 11452-2:2004 Part 2: Absorber-lined shielded enclosure |
| 512 | ISO 11452-3:2016 Part 3: Transverse electromagnetic (TEM) cell |
| 513 | ISO 11452-4:2011 Part 4: Harness excitation methods |
| 514 | ISO 11452-5:2002 Part 5: Stripline |
| 515 | ISO 11452-7:2003 Part 7: Direct radio frequency (RF) power injection |
| 516 | ISO 11452-8:2015 Part 8: Immunity to magnetic fields |
| 517 | ISO 11452-9:2012 Part 9: Portable transmitters |
| 518 | ISO 11452-10:2009 Part 10: Immunity to conducted disturbances in the extended audio frequency range |
| 519 | ISO 11452-11:2010 Part 11: Reverberation chamber |
| 520 | ISO 11453:1996 Statistical interpretation of data – Tests and confidence intervals relating to proportions |
| 521 | ISO/IEC 11458:1993 Information technology – Microprocessor systems – VICbus – Inter-crate cable bus |
| 522 | ISO 11462 Guidelines for implementation of statistical process control (SPC) |
| 523 | ISO 11462-1:2001 Part 1: Elements of SPC |
| 524 | ISO 11462-2:2010 Part 2: Catalogue of tools and techniques |
| 525 | ISO 11469:2000 Plastics – Generic identification and marking of plastics products |
| 526 | ISO 11484:2009 Steel products – Employer’s qualification system for non-destructive testing (NDT) personnel |
| 527 | ISO 11485 Glass in building – Curved glass |
| 528 | ISO 11485-1:2011 Part 1: Terminology and definitions |
| 529 | ISO/TR 11487:2008 Health informatics – Clinical stakeholder participation in the work of ISO TC 215 |
| 530 | ISO 11491:2017 Implants for surgery – Determination of impact resistance of ceramic femoral heads for hip joint prostheses |
| 531 | ISO 11499:2014 Dentistry – Single-use cartridges for local anaesthetics |
| 532 | ISO/IEC 11518 Information technology – High-Performance Parallel Interface |
| 533 | ISO/IEC 11518-1:1995 Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH) |
| 534 | ISO/IEC 11518-2:2000 Part 2: Framing Protocol (HIPPI-FP) |
| 535 | ISO/IEC 11518-3:1996 Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE) |
| 536 | ISO/IEC 11518-6:2000 Part 6: Physical Switch Control (HIPPI-SC) |
| 537 | ISO/IEC 11518-9:1999 Part 9: Serial specification (HIPPI-Serial) |
| 538 | ISO/IEC 11518-10:2001 Part 10: 6400 Mbit/s Physical Layer (HIPPI-6400-PH) |
| 539 | ISO 11532:2012 Aircraft ground equipment – Graphical symbols |
| 540 | ISO/IEC 11544:1993 Information technology – Coded representation of picture and audio information – Progressive bi-level image compression |
| 541 | ISO 11546 Acoustics – Determination of sound insulation performances of enclosures |
| 542 | ISO 11546-1:1995 Part 1: Measurements under laboratory conditions (for declaration purposes) |
| 543 | ISO 11546-2:1995 Part 2: Measurements in situ (for acceptance and verification purposes) |
| 544 | ISO/TR 11548 Communication aids for blind persons – Identifiers, names and assignation to coded character sets for 8-dot Braille characters |
| 545 | ISO/TR 11548-1:2001 Part 1: General guidelines for Braille identifiers and shift marks |
| 546 | ISO/TR 11548-2:2001 Part 2: Latin alphabet based character sets |
| 547 | ISO 11551:2003 Optics and optical instruments – Lasers and laser-related equipment – Test method for absorptance of optical laser components |
| 548 | ISO 11553 Safety of machinery – Laser processing machines |
| 549 | ISO 11553-1:2005 Part 1: General safety requirements |
| 550 | ISO 11553-2:2007 Part 2: Safety requirements for hand-held laser processing devices |
| 551 | ISO 11553-3:2013 Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) |
| 552 | ISO 11554:2017 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics |
| 553 | ISO/IEC 11557:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-DC format using 60 m and 90 m length tapes |
| 554 | ISO/IEC 11558:1992 Information technology – Data compression for information interchange – Adaptive coding with embedded dictionary – DCLZ Algorithm |
| 555 | ISO/IEC 11559:1993 Information technology – Data interchange on 12,7 mm wide 18-track magnetic tape cartridges – Extended format |
| 556 | ISO/IEC 11560:1992 Information technology – Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality |
| 557 | ISO 11568 Financial services – Key management (retail)[Note 4] |
| 558 | ISO 11568-1:2005 Part 1: Principles |
| 559 | ISO 11568-2:2012 Part 2: Symmetric ciphers, their key management and life cycle |
| 560 | ISO 11568-4:2007 Part 4: Asymmetric cryptosystems – Key management and life cycle |
| 561 | ISO/IEC 11569:1993 Information technology – Telecommunications and information exchange between systems – 26-pole interface connector mateability dimensions and contact number assignments |
| 562 | ISO/IEC 11570:1992 Information technology – Telecommunications and information exchange between systems – Open Systems Interconnection – Transport protocol identification mechanism |
| 563 | ISO/IEC 11571:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Networks – Addressing |
| 564 | ISO/IEC 11572:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit mode bearer services – Inter-exchange signalling procedures and protocol |
| 565 | ISO/IEC 11573:1994 Information technology – Telecommunications and information exchange between systems – Synchronization methods and technical requirements for Private Integrated Services Networks |
| 566 | ISO/IEC 11574:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode 64 kbit/s bearer services – Service description, functional capabilities and information flows |
| 567 | ISO/IEC 11575:1995 Information technology – Telecommunications and information exchange between systems – Protocol mappings for the OSI Data Link service |
| 568 | ISO/IEC 11576:1994 Information technology – Procedure for the registration of algorithms for the lossless compression of data |
| 569 | ISO/IEC 11577:1995 Information technology – Open Systems Interconnection – Network layer security protocol |
| 570 | ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call (RPC) |
| 571 | ISO/IEC 11579 Information technology – Telecommunications and information exchange between systems – Private integrated services network |
| 572 | ISO/IEC 11579-1:1994 Part 1: Reference configuration for PISN Exchanges (PINX) |
| 573 | ISO/IEC 11579-2:1999 Part 2: Reference configuration for HS-PISN Exchanges (HS-PINX) |
| 574 | ISO/IEC 11579-3:1999 Part 3: Reference configuration for PINX extension lines |
| 575 | ISO/IEC TR 11580:2007 Information technology – Framework for describing user interface objects, actions and attributes |
| 576 | ISO/IEC 11581 Information technology – User interface icons[Note 4] |
| 577 | ISO/IEC 11581-1:2000 Part 1: Icons – General |
| 578 | ISO/IEC TR 11581-1:2011 Part 1: Introduction to and overview of icon standards |
| 579 | ISO/IEC 11581-2:2000 Part 2: Object icons |
| 580 | ISO/IEC 11581-3:2000 Part 3: Pointer icons |
| 581 | ISO/IEC 11581-5:2004 Part 5: Tool icons |
| 582 | ISO/IEC 11581-6:1999 Part 6: Action icons |
| 583 | ISO/IEC 11581-10:2010 Part 10: Framework and general guidance |
| 584 | ISO/IEC 11581-40:2011 Part 40: Management of icon registration |
| 585 | ISO/IEC TS 11581-41:2014 Part 41: Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database |
| 586 | ISO/IEC 11582:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Generic functional protocol for the support of supplementary services – Inter-exchange signalling procedures and protocol |
| 587 | ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits |
| 588 | ISO/IEC 11584:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode multi-rate bearer services – Service description, functional capabilities and information flows |
| 589 | ISO/IEC 11586 Information technology – Open Systems Interconnection – Generic upper layers security |
| 590 | ISO/IEC 11586-1:1996 Overview, models and notation |
| 591 | ISO/IEC 11586-2:1996 Security Exchange Service Element (SESE) service definition |
| 592 | ISO/IEC 11586-3:1996 Security Exchange Service Element (SESE) protocol specification |
| 593 | ISO/IEC 11586-4:1996 Protecting transfer syntax specification |
| 594 | ISO/IEC 11586-5:1997 Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) proforma |
| 595 | ISO/IEC 11586-6:1997 Protecting transfer syntax Protocol Implementation Conformance Statement (PICS) proforma |
| 596 | ISO/IEC 11587:1996 Information technology – Open Systems Interconnection – Application Context for Systems Management with Transaction Processing |
| 597 | ISO 11593:1996 Manipulating industrial robots – Automatic end effector exchange systems – Vocabulary and presentation of characteristics |
| 598 | ISO 11607:2006 Packaging for Terminally Sterilized Medical Devices |
| 599 | ISO 11608 Needle-based injection systems for medical use – Requirements and test methods[Note 4] |
| 600 | ISO 11608-1:2014 Part 1: Needle-based injection systems |
| 601 | ISO 11608-2:2012 Part 2: Needles |
| 602 | ISO 11608-3:2012 Part 3: Finished containers |
| 603 | ISO 11608-4:2006 Part 4: Requirements and test methods for electronic and electromechanical pen-injectors |
| 604 | ISO 11608-5:2012 Part 5: Automated functions |
| 605 | ISO 11608-7:2016 Part 7: Accessibility for persons with visual impairment |
| 606 | ISO 11609:2017 Dentistry – Dentifrices – Requirements, test methods and marking |
| 607 | ISO/TR 11610:2004 Protective clothing – Vocabulary |
| 608 | ISO 11612 Protective clothing – Protection against brief contact with heat and flame. The heat can be convective, radiant, molten material, or a combination thereof. |
| 609 | ISO 11615:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated medicinal product information |
| 610 | ISO 11616:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information |
| 611 | ISO 11620:2014 Information and documentation – Library performance indicators |
| 612 | ISO 11631:1998 Measurement of fluid flow – Methods of specifying flowmeter performance |
| 613 | ISO/TR 11633 Health informatics – Information security management for remote maintenance of medical devices and medical information systems |
| 614 | ISO/TR 11633-1:2009 Part 1: Requirements and risk analysis |
| 615 | ISO/TR 11633-2:2009 Part 2: Implementation of an information security management system (ISMS) |
| 616 | ISO/TR 11636:2009 Health Informatics – Dynamic on-demand virtual private network for health information infrastructure |
| 617 | ISO 11648 Statistical aspects of sampling from bulk materials |
| 618 | ISO 11648-1:2003 Part 1: General principles |
| 619 | ISO 11648-2:2001 Part 2: Sampling of particulate materials |
| 620 | ISO 11649:2009 Financial services – Core banking – Structured creditor reference to remittance information |
| 621 | ISO/TR 11651:2015 Estimation of sediment deposition in reservoirs using one dimensional simulation models |
| 622 | ISO 11655:1995 Measurement of liquid flow in open channels – Method of specifying performance of hydrometric equipment |
| 623 | ISO 11657:2014 Hydrometry – Suspended sediment in streams and canals – Determination of concentration by surrogate techniques |
| 624 | ISO 11658:2012 Cardiovascular implants and extracorporeal systems – Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| 625 | ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies |
| 626 | ISO 11664 Colorimetry |
| 627 | ISO 11664-1:2007 Part 1: CIE standard colorimetric observers |
| 628 | ISO 11664-2:2007 Part 2: CIE standard illuminants |
| 629 | ISO 11664-3:2012 Part 3: CIE tristimulus values |
| 630 | ISO 11664-4:2008 Part 4: CIE 1976 L*a*b* Colour space |
| 631 | ISO/CIE 11664-5:2016 Part 5: CIE 1976 L*u*v* colour space and u’, v’ uniform chromaticity scale diagram |
| 632 | ISO/CIE 11664-6:2014 Part 6: CIEDE2000 Colour-difference formula |
| 633 | ISO 11665 Measurement of radioactivity in the environment – Air: radon-222 |
| 634 | ISO 11665-1:2012 Part 1: Origins of radon and its short-lived decay products and associated measurement methods |
| 635 | ISO 11665-2:2012 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products |
| 636 | ISO 11665-3:2012 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products |
| 637 | ISO 11665-4:2012 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis |
| 638 | ISO 11665-5:2012 Part 5: Continuous measurement method of the activity concentration |
| 639 | ISO 11665-6:2012 Part 6: Spot measurement method of the activity concentration |
| 640 | ISO 11665-7:2012 Part 7: Accumulation method for estimating surface exhalation rate |
| 641 | ISO 11665-8:2012 Part 8: Methodologies for initial and additional investigations in buildings |
| 642 | ISO 11665-9:2016 Part 9: Test methods for exhalation rate of building materials |
| 643 | ISO 11665-11:2016 Part 11: Test method for soil gas with sampling at depth |
| 644 | ISO/TS 11669:2012 Translation projects – General guidance |
| 645 | ISO 11670:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Beam positional stability |
| 646 | ISO/TS 11672:2016 Connectors for fluid power and general use – Designation and nomenclature |
| 647 | ISO 11675:2005 Textile machinery and accessories – Flatbed knitting machines – Vocabulary |
| 648 | ISO 11676:2014 Textile machinery and accessories – Pattern disks and pattern chains for warp knitting machines – Vocabulary and symbols |
| 649 | ISO 11683:1997 Packaging – Tactile warnings of danger – Requirements |
| 650 | ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – Safety signs and hazard pictorials – General principles |
| 651 | ISO/TR 11688 Acoustics – Recommended practice for the design of low-noise machinery and equipment |
| 652 | ISO/TR 11688-1:1995 Part 1: Planning |
| 653 | ISO/TR 11688-2:1998 Part 2: Introduction to the physics of low-noise design |
| 654 | ISO 11689:1996 Acoustics – Procedure for the comparison of noise-emission data for machinery and equipment |
| 655 | ISO/IEC 11693 Identification cards – Optical memory cards |
| 656 | ISO/IEC 11693-1:2012 Part 1: General characteristics |
| 657 | ISO/IEC 11693-2:2009 Part 2: Co-existence of optical memory with other machine readable technologies |
| 658 | ISO/IEC 11693-3:2015 Part 3: Authentication techniques |
| 659 | ISO/IEC 11694 Identification cards – Optical memory cards – Linear recording method |
| 660 | ISO/IEC 11694-1:2012 Part 1: Physical characteristics |
| 661 | ISO/IEC 11694-2:2012 Part 2: Dimensions and location of the accessible optical area |
| 662 | ISO/IEC 11694-3:2015 Part 3: Optical properties and characteristics |
| 663 | ISO/IEC 11694-4:2008 Part 4: Logical data structures |
| 664 | ISO/IEC 11694-5:2014 Part 5: Data format for information interchange for applications using ISO/IEC 11694-4 |
| 665 | ISO/IEC 11694-6:2014 Part 6: Use of biometrics on an optical memory card |
| 666 | ISO/IEC 11695 Identification cards – Optical memory cards – Holographic recording method |
| 667 | ISO/IEC 11695-1:2015 Part 1: Physical characteristics |
| 668 | ISO/IEC 11695-2:2015 Part 2: Dimensions and location of accessible optical area |
| 669 | ISO/IEC 11695-3:2017 Part 3: Optical properties and characteristics |
| 670 | ISO 11704:2010 Water quality – Measurement of gross alpha and beta activity concentration in non-saline water – Liquid scintillation counting method |
| 671 | ISO 11712:2009 Anaesthetic and respiratory equipment – Supralaryngeal airways and connectors |
| 672 | ISO 11731:2017 Water quality – Enumeration of Legionella |
| 673 | ISO 11737 Sterilization of medical devices – Microbiological methods |
| 674 | ISO 11737-1:2006 Part 1: Determination of a population of microorganisms on products |
| 675 | ISO 11737-2:2009 Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| 676 | ISO/IEC 11756:1999 Information technology – Programming languages – M |
| 677 | ISO/TR 11766:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Security considerations for lawful interception |
| 678 | ISO/TR 11769:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Data retention for law enforcement |
| 679 | ISO/IEC 11770 Information technology – Security techniques – Key management |
| 680 | ISO/IEC 11770-1:2010 Part 1: Framework |
| 681 | ISO/IEC 11770-2:2008 Part 2: Mechanisms using symmetric techniques |
| 682 | ISO/IEC 11770-3:2015 Part 3: Mechanisms using asymmetric techniques |
| 683 | ISO/IEC 11770-4:2006 Part 4: Mechanisms based on weak secrets |
| 684 | ISO/IEC 11770-5:2011 Part 5: Group key management |
| 685 | ISO/IEC 11770-6:2016 Part 6: Key derivation |
| 686 | ISO/TS 11774:2011 Non-destructive testing – Performance-based qualification |
| 687 | ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network |
| 688 | ISO 11798:1999 Information and documentation – Permanence and durability of writing, printing and copying on paper – Requirements and test methods |
| 689 | ISO 11799:2015 Information and documentation – Document storage requirements for archive and library materials |
| 690 | ISO 11800:1998 Information and documentation – Requirements for binding materials and methods used in the manufacture of books |
| 691 | ISO/IEC 11801:2002 Information technology – Generic cabling for customer premises[Note 4] |
| 692 | ISO/IEC TR 11801-9901:2014 Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission |
| 693 | ISO/IEC TR 11801-9902:2017 Part 9902: Specifications for End-to-end link configurations |
| 694 | ISO/IEC TR 11801-9903:2015 Part 9903: Matrix modelling of channels and links |
| 695 | ISO/IEC TR 11801-9904:2017 Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications |
| 696 | ISO/IEC TR 11802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Technical reports and guidelines |
| 697 | ISO/IEC TR 11802-5:1997 Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks |
| 698 | ISO 11807 Integrated optics – Vocabulary |
| 699 | ISO 11807-1:2001 Part 1: Basic terms and symbols |
| 700 | ISO 11807-2:2001 Part 2: Terms used in classification |
| 701 | ISO 11810:2015 Lasers and laser-related equipment – Test method and classification for the laser resistance of surgical drapes and/or patient protective covers – Primary ignition, penetration, flame spread and secondary ignition |
| 702 | ISO/TR 11811:2012 Nanotechnologies – Guidance on methods for nano- and microtribology measurements |
| 703 | ISO 11819 Acoustics – Measurement of the influence of road surfaces on traffic noise[Note 4] |
| 704 | ISO 11819-1:1997 Part 1: Statistical Pass-By method |
| 705 | ISO 11819-2:2017 Part 2: The close-proximity method |
| 706 | ISO/TS 11819-3:2017 Part 3: Reference tyres |
| 707 | ISO/PAS 11819-4:2013 Part 4: SPB method using backing board |
| 708 | ISO 11821:1997 Acoustics – Measurement of the in situ sound attenuation of a removable screen |
| 709 | ISO 11822:1996 Information and documentation – Extension of the Arabic alphabet coded character set for bibliographic information interchange |
| 710 | ISO 11838:1997 Motorcycle and motorcycle-rider kinematics – Vocabulary |
| 711 | ISO 11841 Road vehicles and internal combustion engines – Filter vocabulary |
| 712 | ISO 11841-1:2000 Part 1: Definitions of filters and filter components |
| 713 | ISO 11841-2:2000 Part 2: Definitions of characteristics of filters and their components |
| 714 | ISO 11843 Capability of detection |
| 715 | ISO 11843-1:1997 Part 1: Terms and definitions |
| 716 | ISO 11843-2:2000 Part 2: Methodology in the linear calibration case |
| 717 | ISO 11843-3:2003 Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
| 718 | ISO 11843-4:2003 Part 4: Methodology for comparing the minimum detectable value with a given value |
| 719 | ISO 11843-5:2008 Part 5: Methodology in the linear and non-linear calibration cases |
| 720 | ISO 11843-6:2013 Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| 721 | ISO 11843-7:2012 Part 7: Methodology based on stochastic properties of instrumental noise |
| 722 | ISO 11866 Milk and milk products – Enumeration of presumptive Escherichia coli |
| 723 | ISO 11866-1:2005 Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG) |
| 724 | ISO 11866-2:2005 Part 2: Colony-count technique at 44 degrees C using membranes |
| 725 | ISO 11886:2002 Building construction machinery and equipment – Pile driving and extracting equipment – Terminology and commercial specifications |
| 726 | ISO/TS 11888:2017 Nanotechnologies – Characterization of multiwall carbon nanotubes – Mesoscopic shape factors |
| 727 | ISO/IEC 11889 Information technology – Trusted platform module library |
| 728 | ISO/IEC 11889-1:2015 Part 1: Architecture |
| 729 | ISO/IEC 11889-2:2015 Part 2: Structures |
| 730 | ISO/IEC 11889-3:2015 Part 3: Commands |
| 731 | ISO/IEC 11889-4:2015 Part 4: Supporting Routines |
| 732 | ISO 11898 Road vehicles – Controller area network (CAN) |
| 733 | ISO 11904 Acoustics – Determination of sound immission from sound sources placed close to the ear |
| 734 | ISO 11904-1:2002 Part 1: Technique using a microphone in a real ear (MIRE technique) |
| 735 | ISO 11904-2:2004 Part 2: Technique using a manikin |
| 736 | ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation – Fundamentals and application |
| 737 | ISO 11930:2012 Cosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product |
| 738 | ISO/TS 11931:2012 Nanotechnologies – Nanoscale calcium carbonate in powder form – Characteristics and measurement |
| 739 | ISO/TS 11937:2012 Nanotechnologies – Nanoscale titanium dioxide in powder form – Characteristics and measurement |
| 740 | ISO 11940:1998 Information and documentation – Transliteration of Thai |
| 741 | ISO 11940-2:2007 Information and documentation – Transliteration of Thai characters into Latin characters – Part 2: Simplified transcription of Thai language |
| 742 | ISO/TR 11941:1996 Information and documentation – Transliteration of Korean script into Latin characters [Withdrawn, no replacement] |
| 743 | ISO 11957:1996 Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements |
| 744 | ISO/IEC 11976:2008 Information technology – Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges – Capacity: 60 Gbytes per cartridge – Second generation |
| 745 | ISO 11978:2017 Ophthalmic optics – Contact lenses and contact lens care products – Labelling |
| 746 | ISO 11979 Ophthalmic implants – Intraocular lenses |
| 747 | ISO 11979-1:2012 Part 1: Vocabulary |
| 748 | ISO 11979-2:2014 Part 2: Optical properties and test methods |
| 749 | ISO 11979-3:2012 Part 3: Mechanical properties and test methods |
| 750 | ISO 11979-4:2008 Part 4: Labelling and information |
| 751 | ISO 11979-5:2006 Part 5: Biocompatibility |
| 752 | ISO 11979-6:2014 Part 6: Shelf-life and transport stability testing |
| 753 | ISO 11979-7:2014 Part 7: Clinical investigations |
| 754 | ISO 11979-8:2017 Part 8: Fundamental requirements |
| 755 | ISO 11979-9:2006 Part 9: Multifocal intraocular lenses |
| 756 | ISO 11979-10:2006 Part 10: Phakic intraocular lenses |
| 757 | ISO 11980:2012 Ophthalmic optics – Contact lenses and contact lens care products – Guidance for clinical investigations |
| 758 | ISO 11981:2009 Ophthalmic optics – Contact lenses and contact lens care products – Determination of physical compatibility of contact lens care products with contact lenses |
| 759 | ISO 11986:2010 Ophthalmic optics – Contact lenses and contact lens care products – Determination of preservative uptake and release |
| 760 | ISO 11987:2012 Ophthalmic optics – Contact lenses – Determination of shelf-life |
| 761 | ISO/IEC 11989:2010 Information technology – iSCSI Management API |
| 762 | ISO 11990 Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes |
| 763 | ISO 11990-1:2011 Part 1: Tracheal tube shaft |
| 764 | ISO 11990-2:2010 Part 2: Tracheal tube cuffs |
| 765 | ISO/TR 11991:1995 Guidance on airway management during laser surgery of upper airway |
| 766 | ISO 11994:1997 Cranes – Availability – Vocabulary |
